Read also:
tcl 40" s6000 full hd led lcd smart tv stirling reverse cycle air conditioner bosch hydropower 10h won t light innovation square massage chair review kmart drink bottle blender review bosch highflow 21e pilot light polocool 6.0kw portable air conditioner review139 questions from our users
Adam P.asked
G'day guys I've just installed a slim 30" light bar on my roofrack and the 9" spotlights on my bullbar using the smart harnesses the light bar makes the radio go quiet but otherwise works when it should (only on high beam with rocker switch on), the spot lights only work on low beam and the light doesn't come on in the rocker switch. Halp please.
No answers
Brentonasked
Hi, fitted a set of 9 inch driving lights with harness supplied, light on switch doesn’t come on, driving lights don’t come on and blows high beam fuse. Any help would be appreciated
3 answers
You have a power source going to ground before the load (light). Perform a continuity test on the switch and trace the power supply wire to find out where it's going to ground. If you are not familiar with 12v wiring and testing you need an auto electrician. This is a simple fault to fix if you know 12v systems.
By the looks of things the factory wiring on the back of the driving lightswitch was wired wrong, now I can’t get power for back of head light to driving light switch.
There is a little black resistor looking thing that joins wire from head light to switch light that isn’t letting power through. Could it be burn out from the switch being wired wrong?
Gerwood P.4WD Supacentre
Hi Brenton,
Thanks for the review. If you would like us to check this one, feel free to email me some more details on [email protected]
Cheers,
Saleha
Gnomeeasked
I fitted 9" spotties to a 2004 Hilux and the come on both high and low beam and turn off altogether at the switch
1 answer
Gerwood P.4WD Supacentre
Hi There,
Thank you for your review - Please send your order details to me at [email protected] and I can get this looked into for you.
Regards,
Saleha
Emmaasked
Hi I got so I Got
SKU: AKLL-90DL_01
SKU: AKLL-HARPNP001
9" DOMIN8R X LED driving lights and plug n play harness.
I didn't get any instructions on to wire them ?
1 answer
Gerwood P.4WD Supacentre
Hi there Emma,
I have attached a video below for you that will explain how to install your plug n Play Spotlight Wiring Harness.
Link: https://www.youtube.com/watch?v=mUe_-FyP-XE
Please let me know if there is anything I can assist you with by emailing me at [email protected]
Regards, Kathryn.
Matthew Coombesasked
I connected my new laser 8.5 inch lights to the spot light harness that was already there running Barca lights they were working for 5 minutes then stopped I can’t see any blown fuses
5 answers
Gerwood P.4WD Supacentre
Good afternoon Matthew,
If you could please email me at [email protected] with your order number. I would like to look into this matter further for you.
Regards, Kathryn.
I only just got them last week Matthew Coombes 739 Old Sturt Hwy Glossip 5344 Sth Aust
Gerwood P.4WD Supacentre
Hi Matthew,
Could you please email me at [email protected] with your order number so we can get this looked into for you?
Regards, Kathryn.
John Casked
Do you have installation instructions for your products? I found an 8 page fitting instruction pdf online for the dual battery system but how about the rest of your off-grid Solar and battery gear such as 1500w sine inverter, dcdc charger, battery box etc... essentially I have bought pretty-much everything to set up for going away including the 3.5kw generator and don’t have any clue how to connect and wire it all up. I didn’t expect to have to purchase fuses and / or circuit breakers. Very confused.
2 answers
Gerwood P.4WD Supacentre
Hi John,
Usually all the manuals are available on the website but if you could send me order details for the gear that you got from us, I can try to find and send you links to manuals for them. You can email order details on [email protected]
Cheers,
Saleha =)
Thanks, email sent.
John Casked
Why doesn’t the 160w fixed solar panel come with leads to connect to the dcdc charger? The leads are short and have connectors I’ve not seen before. I expected a plug and play set up and am not an auto electrician. :-(
3 answers
Gerwood P.4WD Supacentre
Hi there John,
They are MC4 connections which are used commonly in solar equipment due to their low resistance.
There are a lot of options for converting the MC4 connections to the set up you require.
What DC-DC charger did you have?
Regards, Kathryn.
Hi Kathryn, I have an Adventure Kings 25 amp charger with mppt solar.
Gerwood P.4WD Supacentre
Hi John,
It will only require some soldering to connect but that would be best off getting an auto electrician to connect it up for you.
Regards, Kathryn.
tommyknocker40asked
Hello I purchased a kings 138ah deep cycle battery for a camping trip. It read 12.7 was run down to 12.3 over the first night. After that it refused to charge above 12.4?
1 answer
Gerwood P.4WD Supacentre
Hi There,
Thanks for the review. If you would like us to check this one further, feel free to email me some more details on [email protected]
Cheers,
Saleha
Emma J.asked
Anyone else had trouble with their steel flat rack (120 series prado) not lining up with the brackets? It's so far out, I've loosened every bolt to allow room to adjust everything but its still really far out!!
1 answer
Gerwood P.4WD Supacentre
Hey Emma
Can you please send me an email with a few photos of how you are installing it and your order details.
My email is [email protected]
Thanks,
Anna
Harriasked
Can you use a plug and play wire set for a light bar
3 answers
Yes
The wire set should include a fuse and relay of the correct amp rating.
Don't wire it direct to your high beam it must be able to be switched of independently from your high beam ( by law ) there will be a switch included in your wire set for this.
Oath cheers
Gerwood P.4WD Supacentre
Hi Harri,
Yes you can use our plug n play smart harness to connect our light bars.
Cheers,
Saleha
Loweyasked
Hi,
I have recently purchased a set of dominator 8 9inch spot lights to replace my previous Kings 7inch. I have used the original wIring harness (Illuminator plug and play) I’ve noticed that the wiring is running very hot... is this normal? Darren.
1 answer
Gerwood P.4WD Supacentre
Hi there,
As the Domin8r driving lights are stronger then the old style you will need to purchase the plug n play smart harness to run the lights.
Thanks,
Anna
mickmantoufehasked
Why is my claim on hold? I have plans to go away camping on the long weekend
Claim# 4eb91138 need it resolved asap
1 answer
Gerwood P.4WD Supacentre
Hi Mick,
Its on hold as we have sent you an email to ask for address and are awaiting response. Email was sent on 14/1/20
Please respond to email so we are able to process this further for you.
Cheers,
Saleha
cameron c.asked
Hi, is it a good idea to use the Kings laser light bar and the kings laser spotlights together or is it overkill?
1 answer
Gerwood P.4WD Supacentre
Hi Cameron,
A lot of people use our laser spotlights with laser light bar on their cars. If you'd have any further queries or want assistance in placing an order with us, feel free to email me on [email protected]
Cheers,
Saleha
mr.frank.morris.1asked
I have just bought the Kings 7 inch spotlights with the wiring loom. I can work out the switch and spotlight branches of the loom. Where does the brack that goes into the headlight circuit attach? Does it connect into the back of the headlight or somewhere else. I have a Navara D40.
2 answers
Gerwood P.4WD Supacentre
Hi there,
Our wiring looms only come with HB3 and H4 headlight adapters - so depending on your vehicles headlight connection, you may need to purchase a piggyback adapter. You can get these from places like supercheap or online on a store called STEDI
Thanks,
Anna
Dear Anne
I have a number of concerns with the answer provided.
1- The Nissan Navara has H4 globes, so your harness should have worked
2- No limitation on the harness to what you have stated above is stated in the advertising.
3- I have been forced to make my own harness to get the driving lights to work.
Of the items I have bought from your store, this harness and instructions on using it is the worst product I have experienced. Detailed instructions and limitations of the product should have been given.
Thanks for your response,
Frank Morris
Brodie speedasked
Hello,
I have just purchased the Kings 9 Inch Spotlights, I already had the Kings 42 inch Lightbar installed on my roof racks and they were working fine with the wiring harness provided by 4wdsupacentre.
I then installed the spotlights with the wiring harness provided, it worked fine but when I switched the lightbar on aswell as the spotlights everything started flickering and the relay for the spotlights started smoking. I turned the car off and disconnected the spotlights and disconnected the adaptor from the headlights and replaced it with the stock ford connection. I later found out that it had blown my high beam fuse and after replacing it my high beam and ligjtbar started working again? How can I plug my spotlights in without it shorting everything out and smoking?
1 answer
Gerwood P.4WD Supacentre
Hi Brodie,
In order to get tis one looked into, I will need your order details. Are you able to email order no. to me on [email protected] please.
Thanks and best Regards,
Saleha
Allan C.asked
Have 2022 Isuzu Mux and the plug and play wiring harness does not fit ????
1 answer
Gerwood P.4WD Supacentre
Hey Allan,
Our wiring looms only come with HB3 and H4 headlight adapters - so depending on your vehicles headlight connection, you may need to purchase a piggyback adapter. You can get these from places like supercheap or online on a store called STEDI
Thanks,
Anna
Jayden B.asked
I'm thinking about upgrading my 7 inch king's spotties to the 9inch domin8r ones and was curious can I just simply plug the new lights striaght into my old wires ??
1 answer
Gerwood P.4WD Supacentre
Hi Jayden, If you had the smart harness before then yes it shouldn't be an issue but otherwise you can send me an email to [email protected] with your previous order details and we can advise you further.
Cheers,
Saleha
hayleyfw050505asked
What batteries does the lead light fan take
1 answer
Gerwood P.4WD Supacentre
Hi there,
The 2in1 Fan/Light requires 2 x D batteries (not included).
Regards,
Tamara
Ruffasked
On Monday the 2nd of December I received a text telling me my order 10800058626 (Gazebo Hub) was ready to collect.
On Wednesday the 4th I called in to collect it, but there were none left. The gentleman that attended me was very helpful and told me he would have it delivered to my home address (46 Clay St Moorabbin 3189) to save me the trip out there again.
I'm wondering when I might receive it?
Regards, Matthew Ruffin 0411 110911
2 answers
Gerwood P.4WD Supacentre
Hi Matthew,
Your Gazebo Hub is due to come into our warehouse in mid December providing no further delays. Once we receive the stock it will be dispatched to you within 24 hours and from there delivery time is 2-5 business days.
On a side note, please be advised that questions posted on Product Review are public so your home address and mobile number is visible to anyone who views this question.
If you do have any further questions please do not hesitate to contact me at [email protected]
Regards,
Tamara
Thank you
Terry A.asked
I have sent emails to both Adventure Kings NZ and Au asking to purchase replacement horizontal poles for my 2x3 awning from last Tues 26/11 and 27/11 with only an auto reply to date acknowleding the emails. I see in stock for Australia but no address selection for NZ? Time is going by.
1 answer
Gerwood P.4WD Supacentre
Hi Terry,
Please feel free to send me an email on [email protected] with the part that you're after and I can check availability for you.
- ‹ Prev
- Next ›
ieatwords.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ieatwords.com.au may earn commissions for products/services purchased via affiliate links.