35 questions from our users

J Smelt
J Smeltasked

is it normal for the microwave motor to continue after the food is completed and end is shown on the dial



1 answer
Kmart
KmartKmartSend a private message

Hi J, please see link for more information you need to know about the product: https://www.kmart.com.au/product/34l-microwave-42668145/

Stephen H.
Stephen H.asked

I have set up anko p90j30ap microwave but when I go to use it it displays loc and will not let me do anything rlse

2 answers
Kelly
Kelly

hot tip - take this back, get a refund and never buy this useless excuse of a microwave again!

Kmart
KmartKmartSend a private message
Frank D.
Frank D.asked

What colour glass door has the 34 ltr anko microwave oven

1 answer
Kmart
KmartKmartSend a private message

Hi Frank, you can check out photos of the product and product details via: https://www.kmart.com.au/product/34l-microwave-42668145/. Hope this helps.

Chloe L.
Chloe L.asked

Is there a way to install the hub/shaft?? I've read the book that came with it twice now and there is nothing in there.
Should it be already installed??

1 answer
Kelly
Kelly

Just save yourself the trouble and take it back and get a refund now. Absolute piece of junk.



Roslyn C.
Roslyn C.asked

Our microwave just displays an error code saying 'FAIL' and won't work after 12 months

2 answers
Kelly
Kelly

It is because this product is an absolute lemon. You are lucky to get 12 months out of it! Sorry to hear you also wasted your money, like I did.

Kmart
KmartKmartSend a private message

Hi Roslyn, we're so sorry to hear this! What month did you purchase the microwave in?

Dennis P.
Dennis P.asked

Why does the turntable have a slight thud when switched on, even though the tray s properly fitted

No answers
peter wallace
peter wallaceasked

What is the microwave anko like

1 answer
king_45
king_45

Easy to use quite powerful but the fan is not strong enough to extract the moist air leaving the interiot quite wet and this leads to rust along the joints in the cavity in less than 12 months

dellodavie
dellodavieasked

What is the warranty period on ANKO microwaves?

1 answer
cptn u.
cptn u.

12 mths

Trevor G.
Trevor G.asked

Can I stop the microwave from contining to beep endlessly after the product has been reheated or cooked ?

2 answers
cptn u.
cptn u.

No unless you open the door and just shut it again... it's there to let you know you still have food in your microwave

cptn u.
cptn u.

All modern microwaves do this not just anko ones they continue to be beep until you open the door ..I for one like the feature because I myself have left food in the microwave and forgotten about it..

Margaret S.
Margaret S.asked

Setting clock on microwave

2 answers
cptn u.
cptn u.

Hold the clock button until it flashes and just type the numbers.

cptn u.
cptn u.

Push clock again to finish setting

Polly H.
Polly H.asked

It wont heat hate it Im returning it to the store I work full time haven't got time to baby sit an appliance just wont a normal microwave push start and it heats

3 answers
Nothappy
Nothappy

Sucks especially if you're in lockdown. I bought mine here in NZ . Total lemon.

Antoinette
Antoinette

It is obviously faulty. I would return it to the store immediately.

Melissa M.
Melissa M.

Mine keeps saying fail on the screen and won’t let me push any buttons so have to turn it off on the wall pain in the bum

Therese B.
Therese B.asked

My microwave was just delivered after a lengthy wait. After using the microwave once I noticed the clear hard plastic film covering the inside glass has a crack in the centre. I didn't attempt to remove this as I thought it was a functional part of the product. Is this the case or should it have been removed? I'm not very happy because I waited a long time to receive it.

5 answers
Nothappy
Nothappy
Antoinette
Antoinette

This is definitely a faulty unit. Return to where you bought it.

Chris D
Chris D

These are hands down the worst microwave I’ve ever owned.
Mine after 12 months started to rust internally.
I didn’t have the receipt still so I was unable to return

Rod O'Brien
Rod O'Brienasked

How do I reset the time on my Anko microwave? I set it, it stays for a few seconds and then returns to 0000, It's as though the m/w computer is faulty since other buttons don't appear to work either.

1 answer
Antoinette
Antoinette

Press the clock icon. Set the time and then press the clock icon again. That is definitely the way to do it as I have done that when the power has gone off. If the other buttons dont work then I would return it to Kmart immediately for a refund.

Sean
Seanasked

Plug in the microwave it says "1.00" but keeps counting and running. Wont stop cant select anything keeps making noise as if its cooking

1 answer
acanuckinoz
acanuckinoz
Leonie S.
Leonie S.asked

The interior light is very dull. Is this normal or do I have a faulty light?

1 answer
Jjess74
Jjess74

Yeah both units I had were full lighting.

Bron R.
Bron R.asked

I got this microwave like 2 weeks ago and from the time I started using it it fills with water and heaps of condensation which is not normal. Anyone else have this problem?

1 answer
Mohd A.
Mohd A.

hello.i have same problem.my name is muhammad farid from dubai .u.a.e.my cell no [contact details removed].

tarah B.
tarah B.asked

How do you take off the child lock off the microwave

1 answer
acanuckinoz
acanuckinoz

The same way you put it on. It's in the manual, which you can download here http://www.kmart.com.au/wcsstore/Kmart/pdfs/42681274_Manual.pdf
I know you probably found the answer, but someone else might come looking for it.

tarah B.
tarah B.asked

How do u take the child lock off the microwave..!!..

No answers
dizzy
dizzyasked

Hi.
Please can you advice me on the defrost button, If I press defrost and then say 1 minute the contents will be really hot and not defrosted. It is as if I have set it to full power. Also if I want to change the power setting I press "power level" and it beeps twice, I then press a number (7 ) now press start, the microwave just counts down from set number (7) and beeps again to finish. If I press "power button" again while it is counting down it tells me it is on 100%. This microwave is driving me crazy.
Thanks

No answers
Rob
Robasked

Does the 476mm depth include the handle?

1 answer
Napha
Napha

Yes, It is 438mm without handle.

Page 1 of 2

Get an answer from our members and Kmart representatives

Other Microwaves

See all Microwaves

Extra Information

Other Microwaves

Ariston MWA25B
Ariston MWA33B
LG NeoChef MS4296
Kmart Anko 20L Microwave
LG NeoChef MS2596
See all Microwaves

ieatwords.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ieatwords.com.au may earn commissions for products/services purchased via affiliate links.

©  ieatwords.com.au Pty. Ltd. All Rights Reserved. General disclaimer: All third party trademarks, images and copyrights on this page are used for the purpose of comparative advertising, criticism or review. This is a public forum presenting user opinions on selected products and businesses, and as such the views expressed do not reflect the opinion of ieatwords.com.au. Further details in the .