??!

52 questions from our users

Paula K.

Paula K.asked

Richmond 90cm BR900DF

I’m really keen on the Belling Richmond 900 duel fuel in black but you have mixed reviews.
Is the any difference with models or frequency of issues with doors warping etc?
Would love to purchase but want to make sure as it’s a significant investment in our kitchen Reno.
Many thanks, Paula.



5 answers
Jane
Jane

Ours is 6 years old and we still love it. They have a new model now that looks like they've addressed the couple of issues that I see others talking about. They've changed the design of the door, for example.

Sharkey
Sharkey

If they have fixed the long door (RHS) warping that would make a big difference. I am still concerned however that IO have contacted both the Belling dealer in Australia as well as the carefree criminals who sold it to me (Harvey N__man) and am still unable to get any after sales service. Maybe you should establish a relationship with the after sales service people through whoever is selling to you before you pay.

Belling
Rachel A.Belling

Hi Paula, Thank you for reaching out to Euromaid, We are delighted to hear you love the Belling range as much as we do, The new Richmond Deluxe series is a new platform and the door structure has been updated, so no warping issue, please let us know if you have any further issues thank you

Mark Balzan

Mark Balzanasked

Richmond BR900DFCNG/LP (Black)

there is a vent on the rear of the oven for the bottom left hand side oven, can anyone tell me what it is for as this is a direct tube from outside to inside??



3 answers
Belling
Mitch H.Belling

hi mark,

according to our tech team this is for ventilation

Mark Balzan
Mark Balzan

thanks, so don't have to worry if smoke and/or steam coming from this vent (it's very visible!)

Belling
Mitch H.Belling

hi mark, no issues at all, but if you ever feel unsure please give our customer care team a call on 1800 444 357 and we can assist :)



Biggerred

Biggerredasked

Richmond 90cm BR900DF

Hi there when I have a frying pan on the stove top the oil or butter goes to the back of the pan can the legs at the front be adjusted to level the stove top please???
Thank you

1 answer
Belling
Mitch H.Belling

Hi,

Please give us a call on 1800 444 357 so we can assist :)

LindsayC

LindsayCasked

Richmond 90cm BR900DF

My oven door on the right won’t stay shut when in use. It seems to be a magnet issue. Is there a fix for this please

Thanks
Lindsay

4 answers
Last resort
Last resort

Hi lindsay. Unfortunately you will need to put in a service request. They replaced my door when i had the same issue. I no longer have the belling had it refunded after 18 months due to all the faults it had. Start checking for rust bubbles now too. Good luck

Belling
Mitch H.Belling

Hi Lindsay,

sorry to hear, please give us a call on 1800 444 357 so we can discuss :)

Amy
Amy

We have the same problem with the right door always sitting ajar! What is going on? (We love our oven otherwise!)

Dave Laurimar Doreen

Dave Laurimar Doreenasked

Richmond 90cm BR900DF

My Belling Oven is just out of 3 warranty and over the past 3 months, this oven is playing up.
When you use the baking oven (bottom Left) and use the left side of the gas cook tops after a few minutes the oven cuts out.
If you keep the cook tops running and try and turn the circuit break on - in constantly trips.

Initially, I thought this was happening only when the oven is running at around 200C, but last night I discovered that at 160C this was happening when the left cook tops were on.

Once i turned off the left cook tops and moved the pot to the right side, then turned the circuit breaker on---It worked.

I haven't tried isolating the the problem to the right side and that is if you turn the right roasting oven on and use the right gas cook tops whether the same will ok. (something I will try today)

The oven is on a separate circuit and no other appliances or GPO are connected to the circuit.

The problem started about 3 months ago.

Seems strange especially after paying 4k for this oven.

Seems to me the the internal wiring has a relay of some kind that is tripping off when it is heated. I think there is wiring under the cook top plate that has perhaps lost its insulation and this is over heating and shorting out the circuit breaker.

Previous Westinghouse oven ran over 10 years, No hitch, and was sold as secondhand... in good nick.

Please advise me what is happening here!!!!!

1 answer
Belling
Mitch H.Belling

hi dave,

sorry to hear, please give us a call so we can discuss over the phone, 1800 444 357 :)

Bernie

Bernieasked

Richmond 90cm BR900DF

The larger door on my oven does not stay closed properly when I use it. Is this covered under warranty even if the oven is over the 2 year mark?

1 answer
Belling
Mitch H.Belling

Hi Bernie,

please give us a call on 1800 444 357 to discuss :)

Aldd

Alddasked

Richmond 90cm BR900DF

Hi,
The manual has 240v single phase/ 3 phase on it.
Can you please confirm if the oven can be run on single phase power without compromise.

Cheers

1 answer
Belling
Mitch H.Belling

Hi Aldd,

This unit can be connected to 1,2 or 3 phase.
Providing adequate supply is available and the cables are correctly sized – single phase will be fine without compromise

Mickers

Mickersasked

Richmond 90cm BR900DF

Having trouble working out how the grill works and the instructions aren’t helping me.. can anyone advise how to turn it on and make it hot enough to grill please?

1 answer
Belling
Mitch H.Belling

Hi mickers,

sorry to hear, can you please give us a call on 1800 444 357 so we can discuss over the phone :)

Beata

Beataasked

Richmond 90cm BR900DF

ive now used the lower left side oven about 5 times, and it still exudes an odour that i assume is from the enamel coating. how long will this last as it is incredibly overpowering and unpleasant? to others who have had issues with the large door on right side not closing properly during the cooking process, we had the same, it has been repaired but i wonder how long that will last before the door needs to be replaced again? seems to be quite a severe design flaw with the use of magnets on such a large door and intense fan. thanks

No answers
Jade Summers

Jade Summersasked

Richmond 90cm BR900DF

Hi, I bought a Belling induction 90cm last year and had it installed in November. I haven’t registers the warranty because it required the model number in the back and it’s already installed. However o recently bought a thermometer to check as it is constantly high in both ovens. My last cake was cooked at 60degrees in the knob but the therms was reading anywhere from 159 to 200. This was a pricey oven and Cake baking and decorating is my serious hobbie. Can you help me?

1 answer
Belling
Mitch H.Belling

Hi jade,

Sorry to hear, please give us a call on 1800 444 357 to discuss :)

Linda D.

Linda D.asked

Richmond 90cm BR900DF

I have a belling 90cm duel fuel and i love it. however i removed one of the knobs to clean it and cant get it back on!! is there a trick to it?? i have 4 pieces, the black knob, a spring, a round silver piece and a thin round plastic piece. its driving me nuts. I have searched the internet but have found nothing to assist me.

1 answer
Belling
Mitch H.Belling

Hi Linda,

sorry to hear, please give us a call on 1800 444 357 so we can assist

Di from Hallam

Di from Hallamasked

Richmond 90cm BR900DF

Can I run the right hand oven with just fan and no heat. I am trying to air dry Quince Paste

1 answer
Belling
Mitch H.Belling

Hi Di,

Unfortunately there needs to be heat coming from the oven when its on

Jeannie

Jeannieasked

Richmond BR900DFCNG/LP (Black)

We have a Red Richmond oven and would like to know if it is possible to change the door front to black?

1 answer
Belling
Mitch H.Belling

Hi Jeannie,

Unfortunately the doors you purchased have to stay the same.

sorry!

David B

David Basked

Richmond 90cm BR900DF

We have the Richmond 900 with the big double burner in the middle. I can't get anything hot enough and it takes forever to light it. Is there an adjustment?

1 answer
Belling
Ruben R.Belling

Hi David B,
We are sorry to hear of your experience, could you send us your contact details via private message so we can have someone from our team assist you? Alternatively you can contact us on 1800 444 357.
Thanks

Roger and Carole

Roger and Caroleasked

Richmond 90cm BR900DF

Hi we bought a Belling BR900DF a few months ago from Harvey Norman and have just used all three ovens together for the first time but the power kept blowing and we worked out that we could not use the lower left oven with the top oven and right hand oven at the same time. Our power is isolated for the kitchen and power boards checked and ok. The lower left oven would not work at all with others on but is ok on its own. Any help?

4 answers
Belling
Ruben R.Belling

Hi, Sorry to hear that you've had this experience with your new oven. We'll need to investigate it further, please private message your contact details and a member of the Customer Care Team will call you or alternatively you can call us on 1800 444 357. Thanks.

Di from Hallam
Di from Hallam

Mine does the same

Belling
Mitch H.Belling

Hi Di,

Sorry to hear, can you please call us on 1800 444 357 to discuss

Renee

Reneeasked

Richmond BR900DFCRNG/LP (Cream)

I have a Belling Richmond 90cm dual fuel range cooker, purchased in August 2018. Scorch marks have appeared on the outside of the upper grill/oven (obviously from using the lower oven). Can you help?

2 answers
Belling
Ruben R.Belling

Hi Renee, can you please get in touch with us so that we can better understand your concerns? 1800 444 357. Thank you.

Isobel Toft
Isobel Toft

We have the same issue and have not even had this oven a year !!

rose

roseasked

Richmond 90cm BR900DF

Hi I have the belling classic 90 cm range. One of the knobs from the control panel has come off and on inspecting it i realised the red and green screws from the shaft have fallen off, how can this be fixed?

1 answer
Belling
Ruben R.Belling

Hi Rose, this will require a technicians visit as these screws secure the internals of the appliance. We would suggest not using this burner until such a time the appliance has been deemed safe (to use) buy a qualified and authorised Belling technician or service partner. Please get in touch with us on 1800 444 357. Thank you.

Casey

Caseyasked

Richmond BR900DFCNG/LP (Black)

Hi i have the richmond. And noticed that the bottom oven does not close 100%. Can hear the fan and can see condensation escaping and just noticed a bit if rust appearing where this happens?

1 answer
Belling
Ruben R.Belling

Hey Casey, sorry that this has happened. Sounds like we will need to investigate with a site visit. Can you please contact us on 1800 444 357?

Thank you.

Robyn H

Robyn Hasked

Richmond 90cm BR900DF

We have a dead mouse in the back of our stove. We think it is under the top. How can we take the top off?
Please help.
Robyn

1 answer
Belling
Ruben R.Belling

Hi Robyn,

This type of action would require an authorised Belling Service Partner or Technician. For us to arrange this for you, please call 1800 444 357.

Thank you.

Julie

Julieasked

Richmond 90cm BR900DF

I have just bought the Richmond 900 dual fuel the manual is atrocious where can I download a decent manual that shows what each setting means?

2 answers
Belling
Ruben R.Belling

Hi Julie,

Please get in touch with us and we will see how we can further assist you - 1800 444 357.

Thanks.

Julie
Julie

Why wouldn’t Belling produce a better manual after all requests by many more. Need a page with decent diagrams what everything does.

Page 1 of 3

Get an answer from our members and Belling representatives

ieatwords.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ieatwords.com.au may earn commissions for products/services purchased via affiliate links.