Not dissimilar to several other reviews, we’re having problems with clouding after 3 weeks.
Weather has ranged from 40deg down to 17 deg (in Leura NSW).
The use of a hair dryer (as suggested by Cabots help hasn’t made any difference). We are hoping to list the house for rental but with this issue we are now looking to resand and look for an alternative. Very disappointing and not one to be recommended.

I've never stripped and revarnished floors before, applying the CFP was really easy and turned out brilliantly. I read the reviews before I started, so I made sure I didn't shake the can, but mixed it up really well. There was no clounding or anything unpleasant and it looks like it was done by a professional. Great product.

I have used an intergrain product that required me to strip back the floors and I got marvellous results and durability. CFP has much less preparation and is very quick to put on and has a lovely finish. Second coat in good weather can safely be put on in 3 hours marvellous the whole job finished in less than a day and no strong fumes.
In my dining room with sliding chairs and scuffing shoes I think I need something more durable which requires a lot more work, for the rest of the house this stuff is great.

I saw some negative reviews but my experience using this product has been excellent. I have used other water-based polyurethane products on our baltic pine floorboards many years ago and it was time to recoat. A preparation that didn't require sanding made for a quick and dust-free start to the job. It was very easy to apply and because it was quick drying meant I could get the job done in a weekend. And what a brilliant finish - looks a treat. Highly recommend.

I varnished some cork flooring in two rooms a couple of years ago, and very happy with the results from this and will use again. I liked the easy wash up and it did not take very long to dry, i used a extra wide brush and it was done in no time,

Saved $$$. Seven years ago we sanded and polished our floors in our investment property using Cabots. Seven years on due to high traffic and low capacity tenants who didn’t take the time to care for things, it was looking a little tired. I used satin in two rooms. A day later hubby used satin but may not have stirred it properly and it was also raining. Advice was to open up and let it dry. Didn’t work. Advice was to sand it. Groan. No time to hire a sander and lift into the car. We bought gloss and it came back looking great! Glad we used our instincts and took a gamble.

Renovated our stairs by ripping off old carpet. Most floor specialists told us we couldn’t revive our mdf treads. Called Cabot’s and they didn’t miss a beat. Patiently informed us about everything we had to do step by step. The result? A gorgeous new staircase with Cabot’s products. Thrilled with the company’s product and their outstanding service!

Great product that is easy to use and pretty forgiving if you're an amateur like me. Did a surprisingly good job at reviving our patchy timber floors. Seemed to soak into the more bare bits and even out the floors over all. Really quick and easy to apply with a roller.

We recently moved to a new house and had a Vic Ash floor in Matt finish installed. No matter how much I clean it, still lacks luster, the floor really looks dusted. Good thing there’s one review here who had use it already on their Vic Ash so we decided to give it a try too. We bought a small tin can first to try on a small piece of our left out uninstalled floor. Happy with the result, we decided to get the big can and do it on our whole house. The product is very easy to use. We did it ourselves and viola! Our matt timber floor come to life! Very happy with the result that I am giving this review to help out others in the future who might have the same issue with on their matt finish floors.

have coated floors 5 times. Does have some spots where it looks a bit rippled.... it's been on the floor approx 4 weeks now and color of floor is getting a bit warmer.
It stays pretty soft for a while....we were very careful putting in our new fridge but still managed a scratch. This was with at least 7 days rest after the last floor treatment!

I've had the same problem as others. I have new stairs and use this product on the treads. Done by professional builders and painters. The rest of our new work is perfect but the stairs are letting us down because of this product.

The problem is it goes milky/cloudy if you wipe it down. I waited a full 7 days and wiped it down with a just damp cloth and the two treads I wiped are cloudy. Even after 7 days.

I'm glad I didn't do all the stairs now but surely after 7 days a soft damp cloth should cause the stairs to go white and milky. Very unhappy at this stage. I'll give it a while to clear up but if that doesn't work it will all have to be re-done.

Quite unhappy at this stage and wouldn't recommend using this and I won't be again.

Tried one litre and was impressed, so I bought a 10 litre drum and did the full floor throughout,
I have never written a review in my life but I am so happy with the end result I decided to post here.
Floor was put in 12 years ago and it hasn’t been touched since and I just followed the instructions and it came up beautifully.was quoted thousands and did it in 2 days on my own for under $500 really happy with results

I bought 3 cans of the matt finish for my country style house, 1st can produced excellent matt finish, second can was very glossy and so was the 3rd, now I have significant differences in the finish of my expensive floor, I dislike the gloss on my country style floor and I believe that the 2 cans of matt is actually gloss. I an angry what it has done to my floor, I would like to know if Cabot has any process in place for quality control!!!

After 30yrs in cabinetmaking, general building & several years in the display industry, I've used 100's of liters of varnish.
This has given me the worst finish ever - limewash.
All the time and effort removing furniture, sanding & masking . Unfortunately for me it didn't go milky straight away, and I used it on an Art deco cabinet (Tassie oak) & a new American black walnut job - all clouded over & needed to be stripped back.
So much work !

Excellent product with the ability to bring out the grain in our vic ash floors and stairs.
A little grain raise on the first coat but a quick sand between coats left a perfect finish.
No smell, quick drying and ease of application and excellent matte finish.
Agree a novice can apply this product with no issues.