Read also:
drum clean fisher and paykel washsmart difference between nan pro gold and nan comfort bauhn 65 inch 4k tv review chefs toolbox pressure cooker reviews fisher and paykel mw513 review 2 in 1 rechargeable hand/stick vacuum kmart reviewFisher & Paykel 90cm/120cm Wall (Flat)
HC90DCXB3 (90cm, Stainless Steel), HC90DCXB1 (90cm, Stainless Steel), HC120DCXB1 (120cm, Stainless Steel), HC120DCXB3 (120cm, Stainless Steel)LindenTasmania
- 4 reviews
- 1 like
Faulty poor design vents
Be warned don't buy this rangehood.
It has some bad design fault with the filter vents the clips spring broke the first time I took them out to be washed I then so gently hand rinsed only it was on pulling back the clip on reinstalling then one of the cilps broken Fisher and Paykel replaced it, then 3 months later it happened a second time I'm definitely not rough with these filters clearly there is a design fault here. Customer service informed me that if it was not found to be manufacturing fault they will not fix.. As if they are g...Read more
oing to omit to it being a design fault. To determine if is is a manufacturing fault I have to Pay $250 for a service call I'm so unhappy with this rangehood and I'm considering going to consumer affairs with my complaint.Similar opinion? Write a review on ieatwords.com.au!
SandipoohSydney, NSW
- 6 reviews
- 12 likes
Looks good, performs mediocre, has flaws.
We bought the HC90DCXB3 rangehood for its soft touch controls, without push buttons. We had bad experience with buttons prematurely failing on other rangehood models we've used previously.
It has a great modern look but that's where the good news end. When I say this Fisher & Paykel rangehood really sucks, I don't mean it in a complementary way.
On paper the features and specs look good but in practice, the extraction is not as powerful as its specifications suggest. At least is not as noisy as the cheapie rangehood it replaces. I wouldn't ca...Read more
ll it quiet but it's not too noisy, either. The installation was a real PITA, for several reasons. Obviously, they didn't put much thoughts into the practicality and ease of installation. Fresh out of the box, the protective foil on the chimney was heavily scratched in several places, even though there was absolutely no sign of damage on the outside of the packaging and didn't seem preveously opened. Probably happened when it was carelessly packaged at the factory. One of the scratches also showed up on th estainless steel but in a place which is not too visible. Still annoying. One of the lights was out, although came to life when reseated the light bulb. Then, during the first minute of operation, the lights were heavily flickering and the brightness control was not working. After some trying it started to work and the flickering got better but never quite went away. I may have to put in a service call if the flickering stays and I'll find out about customer service! Otherwise, the touch controls seem to work well. It would've been nice if they gave a low brightness permanent backlight to the power-on control but that may just be my preference. Overall, the HC90DCXB3 looks good, it's performance is mediocre but otherwise disappointing.
Similar opinion? Write a review on ieatwords.com.au!
mememegold coast
Do not buy this hood!!!
This hood has been dodgy from the start!! From the start the lights come on randomly and then don't go off and then sometimes don't switch on at all.
Currently they are on and we can't get them to switch off. Fisher and Paykel came 4 weeks ago and said it needs a new part. haven't hard anything since so called today to chase up and was told that the part is now in but they can't come and fix for another 3 weeks!! dreading our electricity bill!!
We've had the hood less than a year. Its really noisy too, I wouldn't recommend wasting your money. We are now considering just buying another brand and ditching Fisher and Paykel
Similar opinion? Write a review on ieatwords.com.au!
Find out how Fisher & Paykel 90cm/120cm Wall (Flat) compares to other Range Hoods
Know better, choose better.
LTCPrivate
Poor Quality
Installed in a new house build and fan motor died within 5 years. It includes an 'easy clean plate' which causes air extraction to be poor. The Fisher & Paykel Rangehood looks great but it's really a lemon, I would not recommend this product. Fisher & Paykel customer service is terrible, they showed no empathy and had no intention to put things right.
Similar opinion? Write a review on ieatwords.com.au!
Poor quality, worse customer service
I bought this machine 8 months ago to replace an exactly same range hood which we bought on 2012, dead after only 4 and half years.
A week ago, this machine stopped working, simply dead again. Called the customer service, took a week for a "technician" come to check. checking took 5 minutes, and kept asking me what's the problem, then told me need to wait 10 days to replace control panel, if it is motor, need to get approval before it can be even replaced.
This range hood does do the job when it's working. however, its quality is simply unreliable.
Similar opinion? Write a review on ieatwords.com.au!
JebzMetropolitan Adelaide, SA
- 60 reviews
- 37 likes
Does not work - 820m3 is not correct
Installed in a new house build, been very disappointed in how this range hood works (it doesn't). Extraction is poor, touch controls work when they feel like. The range hood can't extract steam/oil well and is all over the cupboards, I even had the installer come back to check how it's ducted and this thing is dismal. It works the same as a $250 range hood. The extraction is far less and doesn't even open the outdoor louvered vent outside where it's connected to.
Similar opinion? Write a review on ieatwords.com.au!
Difficulty with lights
Initially very happy but have had to change the lights twice in 4 months since installation Seems to be a design fault as vapourised oil gets sucked into the space between the globe and body Very awkward to change globes as have to remove 12 screws and a plate to get at them
Similar opinion? Write a review on ieatwords.com.au!
Travis.
- 4 reviews
Excellent extraction, great lighting, run it on lev 1 power most of the time, so noise quite good
Had this extractor for c. 12 months, no problems and does what you'd hope.
We have the unit venting into the ceiling then out a chimney.
Positives:
Low noise - on setting 1 and 2 - the noise is very reasonable (given we have open plan kitchen to living room).
Great extraction – NEVER see smoke or haze in the kitchen
Fantastic lights – really illuminate the cooktop well, though if I was greedy I’d prefer 3 to the 2.
Negatives:
Noise - on the 3rd power setting it gets pretty loud, but we only run that rarely, and for short bursts (e.g. ...Read more
Similar opinion? Write a review on ieatwords.com.au!
maggsieWestern Australia
- 19 reviews
Happy with purchase
We replaced a 20 year old range hood with the F&P HC90DCXB1 after listening to all the hoods at Harvey Norman. We have found it to be reasonably quiet and easy to clean. After a year I am just now replacing a light bulb which requires you to remove a big plate, which is super annoying. Other than that, I would purchase this unit again and can't fault it really.
Similar opinion? Write a review on ieatwords.com.au!
Find out how Fisher & Paykel 90cm/120cm Wall (Flat) compares to other Range Hoods
Know better, choose better.
too noisy and took a month to replace the faulty command buttons
died within a week, the push buttons were faulty, the part was in back up order, took a full month for repairman to replace...extremely disappointed.
bottom line: looks really cool but it's as noisy as a tractor...and pray it doesn't die on you as you would have to wait dearly for the part.
Similar opinion? Write a review on ieatwords.com.au!
Jo1963Dunsborough
- 4 reviews
- 9 likes
Very dissapointed - Looks great, sounds like a helicopter
This rangehood was part of my package. It was expensive but I liked the sleek look and my previous experience with F & P had been good - but this rangehood has been a noisy, useless lemon since day one. Very disappointed with the product and the customer service. Have attempted to resolve the issue for over twelve months and have been going around in circles. Top price does not equate to top product !!
Looks great
Everything - poor extraction, noisy, condensation drips back into your food your cooking
Similar opinion? Write a review on ieatwords.com.au!
MA_ACTAU
Poor quality
This machine looks stunning, sucking well, but it comes with a very poor quality. It suddenly dead totally after using only 2 months and need to replace parts. And the worse thing is that it took 2 weeks to replace the broken part in ACT and the customer serivce is very inefficient.
stunning look, relatively low noise, good on sucking
Poor quality, poor warranty service
1 comment
Similar opinion? Write a review on ieatwords.com.au!
Questions & Answers
Rolfasked
Purchased the product in 2011. Operated efficiently until recently and then the fan appeared to be labouring on first speed but would pick up on third speed. it has now stopped working on all the fan settings. The lights work. Thoroughly cleaned the fan and checked the circuit board for oil ingress. Used a circuit board cleaner to clean circuit board and all connectors. Not sure if the problem is the condenser or there is a fault in the motor wiring. Can the motor case be split open and internal connections checked for faulty joints?. The control panel on the front works on all settings except fan speed 3. The fan can be spun by hand easily. Any clues or hints. Thanks. Rolf
1 answer
Can’t help with a direct answer to your exact question But let’s say I’ve found this product to be The worst I’ve ever used, mine can’t draw up steam efficiently fir example when boiling food in water no matter what speed l set it on. l ll lll or boost, condensation pours out of the vents all over my induction cooktop into my food as well I have to keep mopping up the water as I cook This is the worst product I have ever owned.
John Sasked
In Harvey Norman today I was told that the HC90DCXB3 was only newly released and yet many of the comments you have here are from 2014 & 2017
Is there a new release of this product?
No answers
wayne masked
Hi my rangehood HC90DCXB1 crap it self so i price a new board very pricey so i look ed at the HC90DCXB3 and i can get it for a bit more than the board so would it be a straight fit and change over,are they the same? cheers
wayne [number removed]
No answers
ieatwords.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ieatwords.com.au may earn commissions for products/services purchased via affiliate links.
RobertB
I have just had installed a Fisher & Paykel HC60PCHTX2 purchased from Harvey Norman Mt Gravatt Qld and my wife used it for the first time today whilst preparing dinner. An hour or so later she tried t... Read more
o turn it on again and there appeared no power to either the fan or to the attached lighting. I turned the switch off at the power point and then on again to hear a high pitched one second tone from the unit yet still the lights and fan would not work. I left the unit alone for around 30 minutes and behold, it works now. I'll have to see what transpires tomorrow and if there is a problem I will be one my way back to Harvey Norman for an exchange with an alternate brand I think. Murphy's law comes to play all too often in todays short used by times.