??!

119 questions from our users

Jennifer B.

Jennifer B.asked

WashSmart Front Loader

Our Fisher and Paykel front loader leaks water while washing cant seem to find the cause any ideas



1 answer
Bev M.
Bev M.

If it is leaking out the front its the seal.

HMZ

HMZasked

WashSmart Front Loader

Why does the drain system turn off and on about 30 times during the spin?

1 answer
Vicwondering
Vicwondering

Not sure but if your standing there at the start count how many "squirts" of water go in before it washes.
All part of the cycles.

cloneme

clonemeasked

WashSmart WH8060P2 (8.0kg)

How to remove the lower front kick plate



3 answers
Vicwondering
Vicwondering

You should only remove the cover for the filter, which is a small plate not the whole kickplate.
A coin or screw driver will help remove.

cloneme
cloneme

I need to remove the whole plate as the
drain rubber hose has slipped inside the the machine.

Belinda
Belinda

me too

Janelle S

Janelle Sasked

WashSmart WH8060P2 (8.0kg)

I power on then try to select cycle by turning knob however machine turns off. Sometimes I will move to cycles other times several. No error code on display.



No answers
Maddie

Maddieasked

WashSmart WH8060P2 (8.0kg)

For some garments, I'd hand wash them and use the washer's spin cycle to dry it.
My son has a WH7560J2 washer. Ever since he bought it 3 years ago, the spin cycle doesn't work to dry hand-washed business shirts. He finds this extremely annoying.
I intend to get a WH8060P2 to replace an existing Fisher & Paykel top loader. Could any user tell if the spin cycle of the WH8060P2 can be used independently to spin dry washings?
Thank you.

No answers
KittyKat

KittyKatasked

WashSmart WH7560P2 (7.5kg)

Hi, is it normal not to see water in the glass door of the machine. I feel it’s not rinsing properly, clothes feel like they have detergent left in them. I am using liquid detergent and have reduced the recommended dose by half. Any ideas? Thanks

2 answers
Vicwondering
Vicwondering

It doesn't sound right, after my wash is finished I wipe liquid from the door and rubber.
My suggestion is, if, you don't already do it, is, do a drum clean by running a 1/2hr wash
with no clothes or detergent, just water (cold) and if you can watch when rinse cycle is on
it may give you an idea if you need a repairman. This is my best guess I hope it works they
are a great machine.

KittyKat
KittyKat

Hi thanks for the tip I’ll give it a go. The machine is only 2 weeks old I hope I don’t need a repair man! Thanks.

LCJ

LCJasked

WashSmart WH8560P2 (8.5kg)

Can you soak in this machine? It looks like it doesn’t have a soak option but are you able to pause it allowing it the soak before continuing the cycle?

4 answers
Vicwondering
Vicwondering

Honestly I don't know. For my soiled clothes what works for me is add with your detergent a scoop of gold nappie san. It works for me. I still use cold water.

LCJ
LCJ

Thanks. So does this machine have a pause on it?

Caroline G
Caroline G

I am also trying to find the answer to this! Have contacted F&P but their answer is just stating the obvious- that there isnt a soak function, but thats not even my question! Has anyone used the pause button to effectively soak the clothes?

Mirco.E

Mirco.Easked

WashSmart WH8560P2 (8.5kg)

I purchased this washer today and the drain hose is to short

No answers
HelenB

HelenBasked

WashSmart WH8560P2 (8.5kg)

Does this machine tangle clothes

2 answers
Litoria
Litoria

We use the Everyday cycle in our machine and haven't had any tangling.

HelenB
HelenB

Thank you Litoria

Trevor S.

Trevor S.asked

WashSmart Front Loader

When my washer drains on any cycle it will drain for about 8 seconds and then stop for 5 seconds and then drains and stops again, it keeps doing this until all water is drained. Is this normal?

1 answer
Rog
Rog

This is normal

Kevin Galna

Kevin Galnaasked

WashSmart WH8560P2 (8.5kg)

I had trouble with the water not draining (error 37) and I cleaned the filter but no success. I removed the pump but I forgot to photograph the wiring. One is a single wire and the other has 2 wires. Where does each wire go, L or A?
Beautiful quiet machine! We have quite a few Fisher & Paykel appliances in our house and we recommend any of your products to our friends. Kindest Regards, Kevin.

No answers
John S.

John S.asked

WashSmart WH7560P2 (7.5kg)

I have just bought this amazing machine but have one question....how do I get the alarm to work when the washing cycle has finished

1 answer
Litoria
Litoria

I don't know of an alarm relevant to the washing cycle. Our machine does several quiet beeps when the final rinse cycle has finished. I recall one reviewer commenting that the beeps were not loud enough to be heard from the other end of the house, and that it would have been helpful to have loud beeps because the next lot of nappies could be put in instantly. With our machine, you would not hear the beeps if you were more than one room away from the machine. That suits us. Perhaps it's worth looking to see how long the cycle is going to take so that you don't need the alarm or loud beeps?

Liam C.

Liam C.asked

WashSmart WH7560P2 (7.5kg)

Does anyone know how to access the pump, ive got the clr filtr error coming up, ive cleaned it out 3 times, blown back through the drain hose, including with water in which its coming out through the filter with no blockages, i can hear an activating sound from the pump but it isnt moving any water, which makes me think that possibly something might be stuck in the pump itself

2 answers
Angie G.
Angie G.

This happens to me and won't finish the cycle until error is fixed.

Stacey M.
Stacey M.

I’m having the same issue, did you end up resolving the issue?

Linda

Lindaasked

WashSmart WH7560P2 (7.5kg)

My washing machine randomly (most washes) leaks from the detergent drawer and there is a lot of water on the floor. Is there a simple solution before I call someone to look at it?

No answers
Gen

Genasked

WashSmart WH7560P2 (7.5kg)

Keeps stopping saying filter need to be cleaned . Filter has been cleaned and flushed. Any help?

No answers
Sam B

Sam Basked

WashSmart WH8560P2 (8.5kg)

Had our machine installed, one successful wash now says error CLR Fltr.

Checked filter nothing there, moved the little fan at the back to reset but still no success.

Error message still there.

Any ideas thanks

No answers
chicky

chickyasked

WashSmart WH8560P2 (8.5kg)

Have had my Washsmart for 3 weeks. Worked perfectly fine until yesterday when it had an error code that there is no water getting to the machine. There is. I decided to put it on a short cycle and it worked perfectly, but now I am using the longer cycle the code keeps appearing. Any suggestions?

No answers
Geoff W

Geoff Wasked

WashSmart WH8560P2 (8.5kg)

How much does the WH8560P2(8.5kg) machine weigh?

2 answers
Ian W.
Ian W.

its on the website or any sales site under specifications for that model

fisher_man
fisher_man

approx 69Kg.

GreenVomit8

GreenVomit8asked

WashSmart WH7560P2 (7.5kg)

Does anyone know if there is a way to may the 'Everyday' wash cycle the 'default' wash cycle that is selected when the washing machine first starts up?
The Everyday wash cycle only takes 60 min verses more than 2 hours with the default 'Cottons' wash cycle and we have been using the Everyday wash cycle as the go to wash cycle for most washes.

No answers
Dazza J

Dazza Jasked

WashSmart WH8560P2 (8.5kg)

is there a way to make the end of cycle buzzer louder ?? our previous machine (Miele) was great you could hear it in the house as our laundry is in the garage but this one is so quiet i find myself having to physically check every 5 min and its killing my ocd lol.
thanks

1 answer
HMZ
HMZ

Use your microwave timer

Page 2 of 6

Get an answer from our members and Fisher & Paykel representatives

ieatwords.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ieatwords.com.au may earn commissions for products/services purchased via affiliate links.