Read also:
hp pavilion 27-n107 review westinghouse 530l bottom mount fridge review kmart 2000w bagless vacuum review difference between nan comfort and nan optipro target 11 fin oil column heater talon ant killer gel coles naked wines australia newport ausLG WT-H750 (7.5kg White) Questions & Answers
16 questions from our users
Sue N John S.asked
When I request a cold wash the water filling the machine is hot.
2 answers
Hi, At the risk of asking what may seem silly, are you sure the hot and cold hoses are connected to the correct tap?
If in doubt, try swapping them (the hoses) over, if that fixes your problem then yes, they were the wrong way round.
Cheers
Thank you
Sue N John S.asked
When I request cold water wash, hot water pours into the washing machine
No answers
Raymond C.asked
Hi. My LG WT-H750 would spin its main tub, but the small spinners at the center and other of it inside won't work. Anyone here know how to fix it up? Thanks
No answers
Tony C.asked
Why have the filters stopped collecting lint?
No answers
Anthony Z.asked
Lg wt-h750 drains fine on wash cycle but when it goes to spin cycle wont drain with oe or de error code, cleaned all filters and hoses even removed pump to make sure no blockages
No answers
Levaine H.asked
what is the acceptable lifespan of LG WT-H750 washing machine. Has 10 year guarantee on motor but motherboard to pump not working and needs to be replaced as water wont drain. My question is why a 10 guarantee on motor if motherboard packs it in within 7 years. Misleading
No answers
Ashasked
I’m using the WT-H750 7.5kg LG TOP LOADER purchased in 2013 haven’t gotten any of the above problems but only in the past couple years, every time it comes to the winter season, my start button wont power on even when I’ve tried to unplug it and turned the switch on and off. Summer time I can do 2-3 loads a day but now it’s getting to the colder season bizarrely my machine never wants to turn on for 2-7 days now. How can I fix this problem?? It’s actually been a week now and my start button doesn’t let me turn the machine on and doesn’t actually power on. PLEASE HELP ANYONE??
1 answer
Sometimes mine won't power on after a load and I just leave it for a few mins. Bit of a pain in the him but it goes again
Bec Casked
My machine goes through the wash cycle and then takes for ever to drain. My washing is take 2hours or more to do. I have to stop the wash cycle and turn it off and then back onto the spin cycle. Not coming up with a fault though Any ideas?
1 answer
Something definitely not right, no way should it be taking that long. Get onto where you bought it and put in a major complaint if you haven't had it long
maryjjasked
My machine was bought in June 2012. It has just developed "drum drop." Has anyone else experienced this?
Allison Brydeasked
im getting a constant alarm that displays the code dE (door lid open) but the door lid is closed. ive tried locking and unlocking the lid. turning the machine on and off, resetting it but it still happens. it is doing my head in. this washing machine is about to fly of the bloody belcony. Any help?
amonstahasked
Hi.LG WM model WT750.OE error.Fills, runs cycle-won't drain.Checked plug-no blockage.When lower hose it drains freely.No sound from pump.Replaced pump with new-still no sound to pump & OE error. Any help? Thanx
1 answer
Hi,
I haven't really had a problem with the machine not draining after it runs its cycle, it only happened once or twice when the cycle was interrupted, possibly due to power outage or when the machine became unbalanced during the cycle, (which occurs often and is very annoying). If we are not there to re-balance it, it re-fills with water and after a couple of times just stops, (if you are not there when it is running its cycle and becomes unbalanced, this maybe one possibility why the machine has not drained). Other than that I am not much help sorry. Good luck.
Swashbucklerasked
WT-H750 won't drain after successful wash. OE error. Released water as per manual but no blockage. No burnout smell. Replaced pump and checked all drainage pipes for blockage but still same error. Door closed properly and produces DE error when opened so I don't think this is the problem. Any suggestions greatfully accepted. What else can I check?
3 answers
Sorry Swashbuckler but I am not a washing machine mechanic. I didn't have that problem with my lemon. Only way to fix it is to get a mechanic to look at it.Wish I could be of more help. Good luck.
Hi, did you ever get this resolved? I am having the same issue with my washer now.
Me too now
Peterasked
Hi there, agitator is not working causing washing powder to sit on the clothes. Rest of cycle is working fine.
Spin dry is working OK.
Please help!
Peter
1 answer
Hi Peter. I'm sorry. I have no idea what the problem is as I am not a mechanic. I guess you will have to get a repair person out to find the answer. Good luck.
Maxasked
Machine was on cycle, when went to check, machine was off, clothes not fully spun and no power to machine.
Checked power point other appliances work in it, plugged machine into another plug still no power.
Is there a way to reboot it?
1 answer
I only had that problem once. I had to leave the machine for a while then restart the cycle. Never found out why it did it. Sorry I can't be of more help.
matty.mascordasked
Hey guys . I have the top loader WTH-750 . For some reason . It wont empty the water . Keeps bring up the error AE .. any help would be great
1 answer
Check that the output hose free and easy for the water to flow out. If it's not, the machine won't pump it.
Johnasked
I am using too much hot water and want to disconnect the hot water hose. Can I do this without damage to the machine and without cancelling my warrant?
ieatwords.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ieatwords.com.au may earn commissions for products/services purchased via affiliate links.