Read also:
natures way slim right review anko semi automatic coffee machine aldi 32 inch tv 2015 bissell airram cord-free 1047f pine discount furniture port kennedy dun and bradstreet scam calls aldi slim and trim shakes price
Pentair Rebel Questions & Answers
43 questions from our users
Chrisasked
My rebel cleaner has worked good for two summers now but it seems to be "sleeping" more then ever. In a corner, half way up the side wall, it just stops and doesn't move. Once I manually move it back into the middle of the pool it will start working again but soon after goes to sleep again.
No answers
Wil B.asked
I have a 3 month old Pentair Rebel. It has been working fine until recently. It appears to primarily run in reverse. With the debris/suction opening Facing the rear and handle to the rear. Once it hits the wall, it will flip onto its top and stay there for a long time. Any suggestions?
1 answer
Maybe take a video and take it back to shop if it’s only 3 months old, it’s still under warranty
BILLasked
Rebel cleaner recently only cleans deep end of pool?
All baskets clear, pressure gauge OK.
2 answers
Take it apart and have a look at the shafts, if they show wear it means the cogs are not catching the teeth on the wheel and it doesn’t move very far, if they are worn you will have to replace them, costs $80 on line, replace both left and right shafts
Thank you - will give it a go.
Jeanetterasked
Phil M.asked
Brand new Pentair Rebel constantly gets stuck on curved portions of the pool. Any suggestions?
1 answer
Hi Phil. If you have a tiled pool as I do I found the Rebel to be no good as the tyres won't grip and the machine spent a lot of time spinning and thinking. I have just swapped mine for a Great White and even with my shiny tiles it has gone over the curves and up the wall. Hope this helps. Cheers
Tiziana F.asked
I have no water flow to pump!
DAVasked
my rebel 2 cleaner continually tangles it self and then will only stay in deep end. Any suggestions?
1 answer
Turn off pump and remove the Rebel from the pool and disconnect the hose. Open the Rebel casing up and pull out the grey neck (the bit that connects to the hose). Try spinning the neck and if it doesn't spin freely, there is more than likely some debris (usually small piece of twig in my case) stuck in the spinning neck piece. If that's the case, just use a tiny screwdriver or similar and remove the object. Hans.
Liane S.asked
My rebel keeps turning upside down and does not right it self so then just sits there until we correct it. Any clues please.
George T.asked
My rebel is not goin to shallow end on pool and I have replaced tires and gears. Any ideas.?
Jim B.asked
My rebel keeps running in circles. I have replaced the tires .I have opened it up to check for obstructions. Any thoughts?
THANKS
No answers
Nada J.asked
My new rebel 2 won’t climb my Quartzon pool wall it gets to the start of the bottom of the wall and the tyres just spin, not sure what is wrong have tried everything to get it to climb but it can’t
No answers
paulasked
how can I contact pentair dist. in queensland please?
No answers
Karen J.asked
We purchased the Rebel S5 while buying a new pool (above ground put in ground) It has pretty much stopped moving completely, Hubby has adjusted suction, checked for debris and blockages but no luck. Our retailer has advised it only had a 2 year warranty - can you confirm please?
June R.asked
My Rebels works nicely for about a year and now its only cleaning half of my pool and only my deep side of the pool. The basket is clean, no leaf stucked. It is really annoying. How can I know if its the problem of the wheel tyre is running out or something wrong with the mechnical parts inside the machine? anyways to check?
2 answers
I'm really not qualified to answer this, best to ask Rebel as I've not had this problem. You'll be asked about the pool surface. It may help if the hose is taken out of the pool and laid flat & straight in the sun for a couple of hours before returning to the pool.
https://www.troublefreepool.com/threads/pentair-rebel-vacuum-making-left-turns.169037/
Lynasked
I have a Pentair Rebel for about 2 years. Recently it only moves around in a small area and it does not clean the pool much at all. I have checked all the connection and all seemed good. The pool shop I bought it is no longer there. What else can I do to improve it please?
4 answers
I would check three things; First check the skimmer and filter baskets to make sure there is not too much debris built up. Second, the suction pressure, there was a tool provided with the cleaner that you place at the end of the hose and it has an indicator to show the suction. Third, in my case the tires wore out within months, if the tread is too worn, replace the tires. Good luck, I hope you can resolve this issue. Also even if your pool store has closed I am sure there is another store that would be happy to help.
Sounds like the problem I had when my rebel was about 2 years old. My rebel was also moving erratically. Problem was the gear teeth on drive shafts to the wheels had worn away and some times didn't engage with the wheels. Purchased right and left shafts and gears online. Easy replacement. All ok now until the teeth wear down again.
Thank you very much JBSML and Colin, I am following up on all your suggestions. Hope they will work.
Chris J.asked
My Rebel frequently ends up on its side, one wheel laying flat against the pool bottom and the other touching nothing. Very frustrating. Any suggestions?
No answers
Roy Masked
My Rebel suction pool cleaner was working perfectly from new (purchased in December 2018) but it has now decided to try and climb out of the pool which leads to it loudly sucking air and causing issues with the pump and filter. I have added water to the pool and adjusted the pressure gauge to lessen the suction pressure slightly and also moved the weight on the hose a little further up the hose away from the unit. Seems to have worked so far but just waiting longer to see if I have succeeded. Any other suggestions will be appreciated.
Roy.
chris Aasked
I contacted the manufacturer as the barrel of the rebel pool cleaner was just doing tiny circles in the pool.They were really helpful and sent me a new replacement barrel.under warrenty.
My problem is now the climbing out of the pool by the barrel and at different times the screaming noise coming from the filter valve.No matter how many times I have adjusted it...works great for a couple of hours then starts to climb out or scream.I have always checked the troubleshoot page and correct water level in pool...its doing my head in...any suggestions greatly appreciated.
puchased November 2018.new barrel replaced May 2022.
1 answer
What part are you referring to as "barrel". There is a part listed as barrel in the replacement parts description in the user manual. Thanks!
Benjamin G.asked
How can I check to see if it is still under warranty?
No answers
Sheila R.asked
My Rebel cleaner keeps flipping on to one wheel and does not correct itself and keep cleaning.
No answers
Other Suction Pool Cleaners
Onga Hammerhead
4.1(133)Zodiac AX10 Activ
3.6(32)Zodiac Baracuda G3
3.8(11)Baracuda Manta
4.4(8)AstralPool S5
4.0(3)Pool Rover ST
3.7(3)Other Suction Pool Cleaners
Onga Hammerhead
4.1(133)Zodiac AX10 Activ
3.6(32)Zodiac Baracuda G3
3.8(11)Baracuda Manta
4.4(8)AstralPool S5
4.0(3)
Brand Manager for Pentair?
Register now and take advantage of ieatwords's Brand Management Platform!
ieatwords.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ieatwords.com.au may earn commissions for products/services purchased via affiliate links.