??!

21 questions from our users

Richard Z.

Richard Z.asked

I was given a Sanli Lazer Cut 400 which hadn't been used for 2 to 3 years. I drained the fuel and oil but in the process, I accidentally got oil in the carburetor.
I've removed the bowl and cleaned the carburetor and spark plug with carburetor cleaner and reassembled it. It still won't start. If I spray the carburetor cleaner into the carburetor it will run for 2 to 4 seconds and then stalls. I've also checked the 92 unleaded fuel does get into the carburetor bowl. Any advice?
Richard



No answers
Peter W.

Peter W.asked

What type of spark plug

No answers
Decima D.

Decima D.asked

download manuel

No answers
Decima D.

Decima D.asked

ohl 400 how to start

No answers
Eddie

Eddieasked

my LM Laser Cut starts well but it loses power and stalls thereafter. any suggestions ?



No answers
Rita K.

Rita K.asked

Is there a service manuel for the 400 Sanli

No answers
Susan S

Susan Sasked

How does the spark plug come out of the 4 stroke mower?

1 answer
PhilB
PhilB

Google "How does the fox go"

Jock

Jockasked

Was the right plug for the San like mower with ohv 400 motor..?



No answers
russ Jones

russ Jonesasked

mower sat in shed for 2weeks then noticed oil on floor put paper on floor rushed mower back same place later on oil on floor any advice please? regards russ. Jones.

No answers
Joe

Joeasked

I bought a Sandi 4 stroke lawn mower can I use Castro 2t self mix in the engine?

1 answer
Rick n.
Rick n.

No you cannot, only use 98 unleaded nothing else in the fuel tank. Hope that helps you.

Simtone Gardening

Simtone Gardeningasked

A friend gave me his sanli 400 laser cut, it doesn't have a spark plug. What type and size spark plug does it take??

1 answer
Steve
Steve

http://www.supercheapauto.com.au/Product/Tuff-Cut-Mower-Spark-Plug-NGK-BPR6ES/321436

James

Jamesasked

Sanli lawn mowers starts and dies quickly. What to do?

1 answer
Steve
Steve

Fiddly buggers, but they cut well and run well once going.
A few simple things to check.
Is your air cleaner clean? Easy to undo the nut and check. Ensure it's left clean in there.
Enough fresh fuel? It's a gravity feed so have enough in there.
Ensure good fuel flow. Is there an air lock at the filter outlet? Disconnect at the outlet end and hold it up to fully prime the filter. I might even flush fuel forward from the hose to help with the next step...
If that doesn't work, then drop the carb float bowl. Jiggle the small white floats up and down to hopefully dislodge any junk stuck up there. If the fuel is flowing well you should be good to go.

slim

slimasked

do you have a parts breakdown

1 answer
BJ_JT
BJ_JT

No sorry, I don't. I have never really had an issues to need to find one. I'll look around when I get home.

ash

ashasked

My mower has stop working i've change the spark plug and still not going. any ideas?

4 answers
Tim Harland
Tim Harland

Check the fuel.
Make sure there is plenty of fuel.
Make sure the fuel lever is pulled back to the top.
Pull the cord full length.
It may take several pulls on the starter.

ash
ash

Its stops starts all the time and the try tieing the chock and still no good is this brand any good on making mowers cause it looks good but working wise in the other hand not to good at all

Dan
Dan

Take it to a mower repairer, the first thing they'll do is drain all the fuel and fill it up with fresh 95 octane rated fuel

It bbrado

It bbradoasked

Which way can I tip my 4stroke mower on its side?

1 answer
K.B.
K.B.

On the Sanli mower, looking from the rear or handle side, tip it towards the right. Should be a big arrow on the LHS of the mower.

glen

glenasked

are the blades soposed to move by hand when the mower isnt going?

2 answers

I'm not sure if the blades are meant to move if the mower isn't going? You would be best to contact the manufacturer, that way the information will be hopefully informative as well as accurate, however don't expect accountability. Another alternative may be to explore forums and/ or Internet that specifically focuses on your particular model of mower. I am not a mower mechanic, nor have I ever been one, I regret the purchase of this mower due to the manufacturer Sanlii not honouring warranty, passing the buck, and well customer service......what customer service....I would recommend a different mower as SANLII HAVE NO INTENTION OF CHANGING AND ACTUALLY LISTENING TO CUSTOMER FEEDBACK!
Have a great day, keep smiling and good luck!

K.B.
K.B.

Yep! They can move as long as they are not loose!!

Old Meg

Old Megasked

I tried to pull the cord, but it only comes out a couple of cms. It seems to be stuck. I had used the mower successfully earlier in the day, but it slowed to a stop. i assumed it had run out of fuel and topped it up. Then the problem with the not being able to pull the cord. What to do?
Old Meg

4 answers
K.B.
K.B.

Sounds nasty. I hope it hasn't seized. Did you check the oil level?? Maybe a repair job. Is it still under warranty??
P.S. Cats shouldn't drive lawn mowers!

Very common issue only with this brand apparently, sounds like the seal, and exactly what happened to me...I had only used my mower approx half a dozen times if that and still under warranty yet manufacturer stated it was my problem...VERY BAD DESIGN ON THEIR PART.. IM contacting the ACCC. This mower is the WORST I have ever come across and I have had a few...they weren't helpful when contacting the manufacturer no customer service or follow up so good luck...recommendation - buy a different brand stay away from Sanlii

Pick1
Pick1

It is a China made mower

john wilson

john wilsonasked

how to repair sanli victory 400 lawn mower, has stopped after hitting rock?

1 answer
Yuri
Yuri

Unfortunately you've probably broken the crankshaft. You may need to take it to a mower repair shop for a quote. I did this to one of my old mowers when it hit part of a concrete slab hidden by the grass.

TREVOR WARD

TREVOR WARDasked

How do you change the oil?

1 answer
Yuri
Yuri

I just undo the dipstick and tip the lawnmower over an ice cream container. Find something to prop it up and let it all run out.

mowing gal

mowing galasked

I need to top up the oil on my mower as I bought it second hand.. Can anyone tell me what viscosity engine oil I need to use?

2 answers
matterohunteros
matterohunteros

Sae 30 cheers matt

lusitan
lusitan

is not the mower problem its you that got problems in how to operate machinery

Page 1 of 2

Get an answer from our members

ieatwords.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ieatwords.com.au may earn commissions for products/services purchased via affiliate links.