Read also:
winix ultimate 5 stage aus-9500 aldi robot vacuum cleaner stirling smith & nobel air fryer aqua systems retractable hose reel caffitaly coffee machine leaking water
Smeg DWA6314 Series Questions & Answers
DWA6314X (Stainless Steel), DWA6314B (Black), DWA6314W (White), etc...34 questions from our users
Amnaasked
I am using the dishwasher from 4 months and never had any issue but yesterday when it turned off after the whole cycle the dishes were not clean properly and next day when I turn it on it’s just showing me the power button light when I turn on and no light for the function button and not turning on. What could be the issue ...
2 answers
It’s still under warranty get smeg to fix it I would
Lesley R.Smeg
Hi Amna. Thank you for your review. We would love to have an opportunity to assist you with this matter. Can you kindly email us with your full name, address and a contact telephone number so we can contact you. Our email address is [email protected] and please mark to the attention of Lesley. Kind Regards, Smeg Australia.
Camasked
My cycle doesn’t seem to be ending. I’ve opened the door and the dishwasher appears to be trying to drain and there’s nothing there to drain. No lights in the middle section of the front are on, only the end light and the 27 degrees for some reason
3 answers
Steve C.Smeg
Hi Cam. Thank you for your review. In order for us to assist you can you kindly email us your full name, address and a contact telephone number. We will then contact you to discuss this further. Our email address is [email protected] and please mark to the attention of Lesley. Kind Regard, Smeg Australia.
Hi Lesley
This has now been rectified, I had it repaired on the weekend as I couldn’t wait
Thanks anyway
Cam
Lesley R.Smeg
Hi Cam - thank you for the update, don't forget we are here to help should the need ever arise again - we are only an email or phone call away. Kind Regards, Smeg Australia.
Pamela T.asked
I have just installed my new dishwasher and the door is getting stuck and I have to push the door down so it will open ? I haven’t used it as of yet because it’s just been installed
1 answer
Rodney M.Smeg
Hi Pamela T.,
Thank you for your enquiry. Please refer to the instruction manual on adjusting the door lock. If you require further assistance, please call our technical support team on 02 8667 4888
Regards
Smeg
Pamela T.asked
I have just installed my new dishwasher DWA6314B2 and the door won’t open, the instructions are inside .
No answers
Keesha C.asked
Hi I have a new Dwa6314x2 - delivered today and the door won’t open fully, it opens an inch then looks like the catch is stuck. Any suggestions?
No answers
David.tasked
I have a smeg dishwasher model dwa6314x not even 2years old and is stopping during cycle. I push on door then start button and finishes cycle. What is the problem
2 answers
Mine is only a few weeks old but sounds like door closer is not closing properly my old lg had same problem so kept it shut with a Velcro strap try that then you need to fix door
Lesley R.Smeg
Hi David. Thanks for your review. In order for us to assist you can you kindly contact us to discuss this matter. It is possible you will need a service call. Our phone number is 02 8667 4888. KInd Regards, Smeg Australia.
Brett H.asked
We have just installed our new smeg dishwasher and it keeps stopping after about 5 mins on any cycle type. The error code is the 1st and 4th led. Any ideas?
1 answer
Lesley R.Smeg
Hi Brett H - thank you for your question. Error one means that the flood switch has been activated. You will require a service call - can you kindly email us direct with your full name, address and a contact telephone number so we can organise a mutually convienent time for this to take place. Our email address is [email protected] - kind regards, Smeg Australia.
Tedasked
we have just puchased
wen starting we are having trouble trying to select wash cycle
it wont allow me to select 70 pots
we can only select 60
also when we press start it runs for a few moments then 60 and 70 flash together and waher turns off
are we using it correctly
thanks Ted
1 answer
Rodney M.Smeg
Dear Ted,
Please contact our technical support team on 02 8667 4888 and they will be able to assist you.
Regards
Smeg
Vanessa M.asked
Hi,
Is there a first time use steps needed for this dishwasher? Or we can use this as usual even for first time use? There is no mention in the manual but just want to make sure. Thanks.
2 answers
Steve C.Smeg
Dear Vanessa, Immediately after installing the appliance you should run a cycle and if the dishwasher fails to operate correctly please email me direct at [email protected]. Other wise you can use the appliance as normal, regards Steve Cullen
Perfect, thank you!
Robynasked
Hi, Our dishwasher purchased in March will not turn on. No light on panel at all?
1 answer
Lesley R.Smeg
Hi Robyn.
Thanks for your enquiry. Can you kindly email us direct so that we can contact you to troubleshoot this problem. Our email is [email protected] - please also screenshot your question and we will be in touch. Thank you Smeg Australia.
Meenu R.asked
Which number to call if i have issues with dishwasher, all lights flashing it wont let me select anything
1 answer
Lesley R.Smeg
Hi Meenu R - Our numbers are on our website ( It is dependant on what state you are in ) or you can email us direct; [email protected] Kind Regards, Smeg Australia.
J Manksasked
We are having trouble setting the delay timer. We have read the instruction manual but it seems vague. can someone tell me how to set it, but in plain english- step by step.
with much thanks for your help
1 answer
Lesley R.Smeg
Hi J Manks .. thanks for reaching out- can you please email us direct with your full name address and contact telephone number and we will contact you direct to discuss this further, our email address is [email protected] please mark to the attention of Lesley- kind regards Smeg Australia
Narelleasked
Hi just had dishwasher delivered. Its freestanding. Door opened so I could get out all booklets extra. Ran first wash without anything in it to clean out any residue left from test. Now cant open door. Very annoying
2 answers
I've never had that, is their a lock, might be a combination of pushing two buttons at same time
Lesley R.Smeg
Hi Narelle. Thank you for reaching out. Can you please contact us direct so that we can discuss this matter with you? Our telephone number is 02 8667 4888 or you can email us direct ; [email protected] - If you email us can you kindly provide us with your full name, address and a contact telephone number. Kind regards, Smeg Australia.
brian hallasked
unable to get rid of end.
have tried the following:
open door
press on button. on/off
press on button and start button hold both.
close door
model DWA314x
1 answer
Steve C.Smeg
Hi Brian. Thanks for your enquiry. Can you kindly email us with your full name, address and a contact telephone number so that we can call you and discuss this with you over the phone? Our email is [email protected] - we await your details. Regards, SMEG AUSTRALIA
Peavvvvvved.asked
My brand new SMEG DWA6314X just installed and purchased on 07072019 door doesn’t shut properly and only the power button is on along with the red - next to the star. I have held down the other 6 buttons and none of them do anything. And YES, the machine is level. Thoughts.
2 answers
Lesley R.Smeg
Hi Peavvvvvved, thanks for your review- we would love to have the opportunity to discuss this further with you could you kindly email me direct with your full name address and contact telephone number ? Once we have this information we will contact you direct to discuss this further - our email is [email protected] please mark to the attention of Lesley kind regards Smeg Australia
Peavvvvvved have faith in the after sale service. I had a problem with a motherboard, out of warranty. Smeg repaired it FOC within days. Love the unit and bought another for our beach house. Sure you'll be looked after if you contact them. I dealt with a Mr Cullen (Nat Service Man)...very helpful.
Lenny B.asked
I need to remove the bottom panel from my smeg DWA6314B dishwasher to check the aquastop. How do I do this?
2 answers
Hey Lenny did you ever figure it out? I need to open mine.
Hi Grace. No I did not!
Actually I wrote a long blurb stating how useless this page is, but decided not to post it. I was so annoyed at every answer telling you to get a professional to fix whatever problem you may be having! Don't waste your time on this stupid site.
Anyway, the machine was new and I complained like to the people who sold it to me. They swapped it for a new one.
Sorry! I'm being as useful as this dumb site.
If I didn't care about what my smeg looked like I'd tear away the bottom panel and not worry about the look of it afterwards. (my partner cares so I wasn't allowed ha ha). It's just crappy plastic and will break easily I reckon,
I think the important thing is to get to the float in order to empty the tray. Who (other than my partner) cares about the look of the machine? As long as it works. Right?
Good luck with it.
Mark G.asked
Can the top be removed to fit under a bench. Thank you
2 answers
Yes, I did it to mine. There are two screws on the back just below the top. Unscrew these and the top should come loose.
Lesley R.Smeg
Hi Mark G - thanks for your enquiry. We would not recommend that you remove the top of the dishwasher as this would mean that the wiring is exposed. If you have any queries, please contact our Technical Team on 02 8667 4888 - Kind Regards, Smeg Australia.
David A.asked
I have ever got the necessity to use the dishwasher, but now that I need to finish my lease, I tried to turn it on but anything happens, the socket is giving power and the water tap is also open, but any of the buttons work and it does not turn on. Many thanks, David
1 answer
Steve C.Smeg
Hi David all that you can do is check that there is power at the power point, if the lights do not come on you will need a service call, please call Smeg service on 02 8667 4833 to arrange a call.
Thanks Smeg tech support
Carmen Grimaasked
Have just installed a Smeg DWA6314X stainless steel and have tested a cycle however when it gets to the end it seems to be giving me what seems to be the E7 error - 3 flashing lights on the cycle pad and a flashing light on the pause/start indicator - and does not finish. However it seems to go through it's cycle of filling and emptying without an issue. I have tried interrupting and annulling but nothing seems to work. Any help?
2 answers
I’m sorry if it is a error message I am unable to help and it’s best you contact smeg. One thing I have noticed with my dishwasher is that towards the end of the cycle it does have all 3 lights on the pad flash and the pause flash and I had to leave it while longer for it to work through its cycle then eventually it switched off, this was different to other dishwashers I had owned. Perhaps this may be the solution, leaving it longer to work through its cycle as they take some time.
Steve C.Smeg
Hi Carmen Grima,
It sounds like there is an issue with the turbine water meter or possibly the pressure switch,
Please contact our Service Department on 02 8667 4833 to arrange a service call.
Regards,
Smeg Tech Support.
Tonyasked
We've had the dishwasher for 3 days. Worked fine till today. Power button works but nothing else working. Nothing else lights up. Any help?
1 answer
Steve C.Smeg
Hi Tony it could be the dishwasher is slightly out of level causing the door switch not to turn on, please call Smeg service on 02 8667 4833 to arrange for a technician to look at your dishwasher.
Regards Smeg tech support.
Other Freestanding Dishwashers
Westinghouse WSF6606 Series
3.9(275)Dishlex DSF6106
3.9(155)Bosch Serie 2 SMS40E08AU
4.0(93)Euromaid DR14S / DR14W
3.8(69)LG QuadWash
3.6(32)Baumatic GDW45S
4.0(1)Smeg DWA6214 Series
4.0(2)Euromaid EDWB14
5.0(1)Smeg DWA6315 Series
4.5(2)Other Freestanding Dishwashers
Westinghouse WSF6606 Series
3.9(275)Dishlex DSF6106
3.9(155)
Related Articles
The best kitchen appliances in 2020!
Whether you love or loath being in the kitchen, our community of reviewers have determined that out of almost 5,000 appliances on ieatwords.com.au, these are the best available!
Nathan S.1 May 2022Best Fridges and Dishwashers in 2020!
These large kitchen appliances are the backbone of your kitchen, meant to last you many years. The initial cost of a fridge or dishwasher is high, so to make sure you're not buying a lemon, here are the best fridges and best dishwashers of 2020. Our reviewers have provided detailed ratings for important factors to consider when choosing a refrigerator or dishwasher, such as Noise Level and Internal Layout.
Wendy Z.12 May 2022
Listing monitored by Smeg representatives.
ieatwords.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ieatwords.com.au may earn commissions for products/services purchased via affiliate links.