Read also:
fisher and paykel gw712 not draining rinnai avenger 25 plus review sunbeam torino vs breville dual boiler canon ts5160 pixma home printer reviews sunbeam torino vs breville dual boiler ziegler and brown bbq cleaningDometic CFX 95DZW (94.5L) Questions & Answers
23 questions from our users
Justinasked
Hi, I have the cfx95dzw. Both compressors work on 240v, on 12v only one works, the other I can hear it kick in but then it stops. I put it in emergency mode and both worked, switched back to 240v and both run simultaneously.
No answers
Andrewasked
How long should it take for your fridge to get to the desired temperature? First time I have turned it on. It’s been running for 2 hours and the temperature has not changed. Thought/ help please.
Warren L.asked
Hey there I have a new 95L waeco fridge freezer, I set the freezer on -18 and it struggles and will only get to -10 -12 max and even when there both in fridge it still seems like it almost runs every 5 minutes anyone else has similar ??
1 answer
I am the same, a new 95L, one side goes to -18, the other cant get past -10. Did you find a solution?
Mattasked
My freezer side works perfectly but my fridge side reads, what I set the temperature too, but freezes all the gear. And when I drop a thermometer in that side, it reads -16. When it is set on 10. Any help would be great
No answers
Jessicaasked
My freezer says it’s -11 degrees but won’t keep things frozen we’re running it using the 12v lead any help appreciated it’s only 3 months old
1 answer
Hi Jessica, yeah, sounds like the same problem we had with the first one. Before you take it back, check voltage level at the plug. Should be12.7v-13.5v or there about. They will want to know this just to try and put the blame on someone else. These are only fridge/freezers the same as your house fridge and should work exactly the same. If you get the run around just threaten them with the Ombudsman.
Best of luck
Graham
Simon B.asked
I have an Er2 display and freezer not working! Does anyone out there know what to do
No answers
Simon B.asked
I have a Er2 display on my freezer and no go! Anyone have any advice
Craig W.asked
My cfx95 blue status light is staying on in the big compartment and the temp reading is 36 and is freezing everything inside ? Why?
ninoasked
settings one side ok other side stays off how to fix
No answers
Robasked
I have the unit set to 2c in the back compartment and -20c in the front it seems to be running constantly switching from one comp to the other with 10min break, is this normal? The ambient temp is 28c and the unit is in the shade all day.
No answers
David Sasked
Red light is on the small triangular light below the power light. Neither compartment is cooling. When I click on the ? next to the comment on the mobile app it says “valve faulty”. What does this mean?
No answers
Mark Berendsasked
Brand new Dometic CFX95 not cooling or freezing. Blue light is on, main compartment is set to 4c, smaller set to -4c. But temps sit at 16 & 13 respectively. No warning lights all blue, any idea
3 answers
240 or 12v?
240
Must be something faulty. I can have mine on 4 and -10 and runs and sits fine on 240 or 12v. I get some fluctuation, but generally only a couple of degrees.
Kenjasked
red warning light continuously flashing as soon as I power up the unit on 12v or 240v or 24v,compressor does not try to start.full power going into controller.Unit will run in override for maybe 5-10 min then red light stops flashing at that time I can switch back to normal operation.Fridge continues to work perfectly,it cycles on and off as it should for a hour or so then faults out again. Thats that untill I put it back in override and process repeats itself. Any ideas?
3 answers
Sounds like the thermister may be faulty, its job is to send temp back to control curcuits which control when to run and how long . its a job for the service guys and may only require the termo replacing but be prepared for the cost (if out of warranty ) of replacing the circuit board .
Thanks for your reply, have been talking to others and come to the same conclusion. I will follow that up, hopefully not to expensive.
new compressor controller fixed it.all good now
Bonnie Gasked
Hi I have purchased a Waeco CFX 95Lfridge freezer and we can't work out when pressing the + & - together it bring up a mode showing. A1, A2, A3, A4 and you can also drop it down to -A1 -A2 -A3, -A4
Can anybody tell me what this means and where is should be set ?
No answers
Rodasked
Do the 12v leads differ between models? I know the plug is the same but I notice on advertising it says the lead is suitable for a 60l but not a 95l and visa-versa.
2 answers
When I bought a second lead there were different lengths so I bought the shortest.
There is a possibility that there may be a higher rated fuse in the 95 cable so the main difference as long as plug at fridge is same is probably the fuse.
Lionelasked
We set one side to minus 2 degrees its stays on 16 degrees with blue light saying cooling but nothing changes.
Other side we put it on minus 6 degrees but its saying minus 23 degrees & has not changed?
1 answer
Thermo coupling has gone by the sounds of it, switch to override and see what happens
Rob_Shazasked
I have a dematic waeco 95cfxw the freezer want work on DC power i have it plugged in to a 120 amp DC socket freezer set at -12 am i doing something wrong?
No answers
Justin Sasked
My freezer temperature won't go below -12. Any help?
Mtmxtasked
Hi, I have a DZ95 it’s been great but we are about to leave on a trip and have had the fridge cooling down for a few hours on the 12v batteries and instead of keeping the batteries charged why I have the fridge running I plugged in the mains and the compressor stopped but all switches and lights are on and working?
1 answer
This happens to me every time when the compressor is running on 12v at time of applying 240v. I can't tell you exactly why it happens but it appears normal. The fridge still continues to work and eventually the compressor will start again. Only suggestion I have is that when the 240v is applied is it checks with the new power applied where the fridge is in cooling. I notice often that only one compartment is being cooled at anytime. I also notice that on 240v, once the compressor restarts, that both compartments cool a lot quicker even though still running alternate.
Chadwickasked
I've just bought 95ltr waeco what size battery should i buy to run it ?
No answers
ieatwords.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ieatwords.com.au may earn commissions for products/services purchased via affiliate links.