??!

141 questions from our users

Mark.B

Mark.Basked

WSF6606 Series

F5 error, water inlet solenoid works fine and replaced the water brake. All cycles fill empty then empty and display F5. What is the problem. Its about 4 years old.



1 answer
lance b.
lance b.

I had exact same issue thinking control board but did think it was worth spending more on it so decided to just get a new machine.

Garry J.

Garry J.asked

WSF6606X (Stainless Steel)

what is H22

1 answer
lance b.
lance b.

Delay timer set for 22 hours

Gavin S.

Gavin S.asked

WSF6606X (Stainless Steel)

F5 how do I fix



1 answer
lance b.
lance b.

Mine was 3 years old when it started getting F5 errors only on certain cycles. I guessed it may have been the control board as it was not happening on all cycles. Used it for another year on heavy cycle, before it stopped totally. Decided just to buy another dishwasher . Inlet solenoid could be a cause but mine was fine. Mine would fill and drain out before it started the cycle.

lance b.

lance b.asked

WSF6606X (Stainless Steel)

what parts can cause the F5 error? mine had it constantly on all cycles except the heavy and intense for about 12 months, now its won't work on any cycle. my water inlet solenoid is good.

No answers
Maggie M.

Maggie M.asked

WSF6606 Series

My dishwasher showing F5 code

No answers
JUNEB

JUNEBasked

WSF6606X (Stainless Steel)

What does the error code H24 mean please?



1 answer
lance b.
lance b.

timer delay button pushed -- that is set for 24hrs

debbie-peter56

debbie-peter56asked

WSF6606 Series

F5 has come up flashing in a westinghouse dishwasher. When googled it said it was the inlet hose. where would i find this

1 answer
debbie-peter56
debbie-peter56

Where do i find the inlet hose on a westinghouse dishwasher?

Katelyn B.

Katelyn B.asked

WSF6606X (Stainless Steel)

Hi I have a F1 problem with my dishwasher. I have cleaned inside. turned it off at the power point and back on but it switches straight onto the cycle and I can not pause or reset. I even turned off circuit and same thing happened. keeps running????

1 answer
Westinghouse
ELECTROLUX ..Westinghouse

Dear Katelyn B.,
Zaida from Electrolux here.
We would appreciate the opportunity to discuss the concerns you have raised about your appliance.
If you wish to discuss this further, please email [email protected] with Ticket Number 1345286, include your name and number, and we’ll be in touch.
Thank you.

Ruth

Ruthasked

WSF6606X (Stainless Steel)

Hi I have a westinghouse WSF6606 - it is working fine but when the cycle is completed I cannot turn off the power button. Is there a reasons for this. Thank you Ruth

1 answer
jamie r.
jamie r.

looking for top sprayer for this model WSF6606X sn.83600709 pnc.942001222 can anyone help?

Terry S

Terry Sasked

WSF6606X (Stainless Steel)

Our Dishwasher has code H24 what is this please

No answers
Caralue

Caralueasked

WSF6606 Series

F6 code reoccurring on machine any ideas as to cause

No answers
Nikki

Nikkiasked

WSF6606X (Stainless Steel)

Hi my dishwasher keeps turning off during a cycle.
Also when I press the power bitten it doesn’t always stay on-takes forever, and then I have to be super quick to start a cycle as it just turns off.
Anyone have these issues? No errors coming up just not switching on properly.

No answers
Lyn

Lynasked

WSF6606X (Stainless Steel)

Hi why is F2 flashing on my westinghouse dishwasher, Its only 3 mths old

No answers
Nadia A.

Nadia A.asked

WSF6606X (Stainless Steel)

What does Ch24 means

No answers
Amanda F.

Amanda F.asked

WSF6606X (Stainless Steel)

My dishwashers lights flash it stops for about a minute while the lights are flashing then starts and finishes but it can stop and flash quite a few times im not getting any error codes hmm what to do frustrated thanks Amanda

No answers
Leeanne G.

Leeanne G.asked

WSF6606X (Stainless Steel)

Why is my wash light not on

No answers
Peter3991

Peter3991asked

WSF6606X (Stainless Steel)

Purchased the WSF6606X four years ago and yesterday when I started the washing cycle on ECO it started making a striking noise and ten minutes later the unit stopped and all the LEDs where flashing and the display was showing an F9 error message (Flow Control Valve position error), does anyone know if this is repairable ? Many thanks

1 answer
Mark
Mark

Replace the controller board. Mark

Jeevan R.

Jeevan R.asked

WSF6606X (Stainless Steel)

My dishwasher (WSF6606X) works for 10 minutes and then F5 Error Blinks. It is brandnew Dishwasher.

I can see water going through Inlet Tube and I have turned on fully. Don't think it is water pressure issue because my previous Dishwasher was connected to the same inlet point and it was working fine !!!

Purchased at Appliances online on 6th Jan 2020.

Any tips ??

4 answers
Nick
Nick

Sorry none, mine goes into F5 after 2 minutes, doesn't perform a wash at all.

I've contacted Electrolux about 2 weeks back for a service call, have yet to hear anything, we are simply washing dishes in the sink.

Jeevan R.
Jeevan R.

I have Electrolux Technician coming tomorrow - hope issue will be resolved.

Nick
Nick

Cool, please let me know how it goes, the weird thing is I managed to get it going fine for a few weeks after the initial F5 error, then the error returned and has been out of action for about a month now. Look forward to hearing the result. Cheers

Dale R.

Dale R.asked

WSF6606X (Stainless Steel)

My dishwasher delay is flashing h24 and won’t start

No answers
Bill s

Bill sasked

WSF6606X (Stainless Steel)

No water coming out of top arm

No answers
Page 1 of 8

Get an answer from our members and Westinghouse representatives

ieatwords.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ieatwords.com.au may earn commissions for products/services purchased via affiliate links.