Read also:
is bauhn a good brand aldi slim and trim shakes review aldi 65 inch tv 2017 bellini pasta and noodle maker review halo kate hair straightener price stirling 4.5 kg clothes dryer review smith & nobel 12l digital air fryer oven kmart 5.3 litre air fryerWestinghouse WSF6606X (Stainless Steel) Questions & Answers
106 questions from our users
Gavin S.asked
F5 how do I fix
1 answer
Mine was 3 years old when it started getting F5 errors only on certain cycles. I guessed it may have been the control board as it was not happening on all cycles. Used it for another year on heavy cycle, before it stopped totally. Decided just to buy another dishwasher . Inlet solenoid could be a cause but mine was fine. Mine would fill and drain out before it started the cycle.
lance b.asked
what parts can cause the F5 error? mine had it constantly on all cycles except the heavy and intense for about 12 months, now its won't work on any cycle. my water inlet solenoid is good.
No answers
JUNEBasked
What does the error code H24 mean please?
Katelyn B.asked
Hi I have a F1 problem with my dishwasher. I have cleaned inside. turned it off at the power point and back on but it switches straight onto the cycle and I can not pause or reset. I even turned off circuit and same thing happened. keeps running????
1 answer
ELECTROLUX ..Westinghouse
Dear Katelyn B.,
Zaida from Electrolux here.
We would appreciate the opportunity to discuss the concerns you have raised about your appliance.
If you wish to discuss this further, please email [email protected] with Ticket Number 1345286, include your name and number, and we’ll be in touch.
Thank you.
Ruthasked
Hi I have a westinghouse WSF6606 - it is working fine but when the cycle is completed I cannot turn off the power button. Is there a reasons for this. Thank you Ruth
1 answer
looking for top sprayer for this model WSF6606X sn.83600709 pnc.942001222 can anyone help?
Terry Sasked
Our Dishwasher has code H24 what is this please
No answers
Nikkiasked
Hi my dishwasher keeps turning off during a cycle.
Also when I press the power bitten it doesn’t always stay on-takes forever, and then I have to be super quick to start a cycle as it just turns off.
Anyone have these issues? No errors coming up just not switching on properly.
No answers
Lynasked
Hi why is F2 flashing on my westinghouse dishwasher, Its only 3 mths old
No answers
Nadia A.asked
What does Ch24 means
No answers
Amanda F.asked
My dishwashers lights flash it stops for about a minute while the lights are flashing then starts and finishes but it can stop and flash quite a few times im not getting any error codes hmm what to do frustrated thanks Amanda
No answers
Leeanne G.asked
Why is my wash light not on
No answers
Peter3991asked
Purchased the WSF6606X four years ago and yesterday when I started the washing cycle on ECO it started making a striking noise and ten minutes later the unit stopped and all the LEDs where flashing and the display was showing an F9 error message (Flow Control Valve position error), does anyone know if this is repairable ? Many thanks
Jeevan R.asked
My dishwasher (WSF6606X) works for 10 minutes and then F5 Error Blinks. It is brandnew Dishwasher.
I can see water going through Inlet Tube and I have turned on fully. Don't think it is water pressure issue because my previous Dishwasher was connected to the same inlet point and it was working fine !!!
Purchased at Appliances online on 6th Jan 2020.
Any tips ??
4 answers
Sorry none, mine goes into F5 after 2 minutes, doesn't perform a wash at all.
I've contacted Electrolux about 2 weeks back for a service call, have yet to hear anything, we are simply washing dishes in the sink.
I have Electrolux Technician coming tomorrow - hope issue will be resolved.
Cool, please let me know how it goes, the weird thing is I managed to get it going fine for a few weeks after the initial F5 error, then the error returned and has been out of action for about a month now. Look forward to hearing the result. Cheers
Dale R.asked
My dishwasher delay is flashing h24 and won’t start
No answers
Bill sasked
No water coming out of top arm
No answers
Ozcoachasked
We have an Westinghouse Dishwasher WSF 6608x which is 21 months old. It is now showing and F9 fault. I have done some basic research on the drain outlet is clear. Please advise.
5 answers
That seems to be a flow control position error. You need to contact whoever you bought it from and INSIST on getting it fixed. If they refuse conract consumer affairs
Paul
ELECTROLUX ..Westinghouse
Good morning,
Julie from Electrolux here.
If the issue you have raised is still not resolved at this time, can you please email me your contact details at [email protected] attention Julie Ticket Number 1196607
We would really like to assist you.
Thanks,
Julie
Hi Julie from Electrolux..we have the same F9 fault on our Westinghouse dishwasher also & require help please. Tracy.
June B.asked
My dishwasher is flashing an error code of H13. It won't start a wash.
2 answers
Delay has been selected. Cancel delay setting
Thanks very much. I sorted it out Paul. June
June B.asked
Error code of H13. What does that mean? It won't start the wash.
No answers
Richard B.asked
How do I change the default wash program?
Samantha Janeasked
Are the dishes supposed to be dry at the end of the eco cycle? I installed mine today and the first wash on eco the dishes came out soaking wet. Whats the point of the dry cycle if they are wet?
2 answers
It dries the dishes slowly to save energy, I do my wash in the night and in the morning when I get them out its dry and very clean. happy with is product.
Hi. I think mine is faulty as the dishes are far too wet and aren't even dry in the morning
ieatwords.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ieatwords.com.au may earn commissions for products/services purchased via affiliate links.