Euromaid WM7PRO Questions & Answers

average cycle time?

Why does my wm7pro look different to the one on this page

Has anyone had their door seal warp? Ive had the machine just over 1 year and the water runs from the bottom of the door all over the floor and then I have to do an extra spin rinse to get the water fully out of the drum. Thanks!

Heya! I recently triggered the excessive foam absorption system. I'm just wondering if there was a program that allows me to drain the water without spinning the machine as when the water is moved it gets all foamy again. Sadly the manual can't tell me. I've tried selecting the spin+drain programme and used the spin adjuster to put it to no spin but it still spins it and foams up the water again. I want to avoid manually draining it as I live in an apartment.

Hi had it for 5 months
We cant work out how to set programs
All we want is a general clothes setting that has about 1 hour total cycle time and including a good spin dry
What buttons do we press?
Graeme

We cant understand the manual
Our washes take too long and too wet at the end
We have general clothes which we want washed in about an hour and come out as dry as possible
What buttons do we need to press?
Graeme

How to open the filter after the little door in the front of a WM7PRO? The user manual says just turn it, but that’s not correct.

Hi, we have opened the little door at the bottom on the front and drained the water and removed the filter to clean out the filter, the filter is just plastic there is no filter mesh or anything to collect lint etc, we were just wondering if there is something missing that fits inside the little filter which is like a little plastic plug with a couple of layers too it, we just don't see how it can filter enything as it is so open, thanks Janice

Just bought machine and when spinning makes a weird loud rubber noise? Should this be happening or do I need to get in touch

My WM7Pro is only 1 year old and has started leaking from underneath . The filter has been emptied regularly. The machine has done no more than 20 washes. Leaking occurs a little during the wash and afterwards. Feeling disappointed.

There are wash settings that use cold water only.
Hi, can you tell me which settings these are please?
Thanks
Tina

Hi, my machine is less than a year old but it is taking almost twice the time stated to wash and doesnt appear to be spinning correctly. Doesn't seem to matter what setting, amount of clothes or amount of detergent I use. Please help!

Hi I have a WM7 front loader it’s not even 1 year old and won’t spin. I can’t get the front filter open either to check if there is a blockage. Any ideas?

I can't open the door on my machine. The end light is on but it won't open. There seems to be water still in the machine. It is only 3 months old. Any help?

The door will not unlock no matter what I do. I have run it through several washes. Drain and spins and tried the above described reset. Its just locked. Any ideas?

I’ve just purchased a WM7PRO. User manual and sticker on door refer to lock symbol but I have never seen it illuminated, even when the the door is locked. I’m assuming the lock light is above the button that says quick wash. Am I looking in the wrong place?

Is there any way to override the heat action? I bought the washer for a rental property because of the energy and water rating.and didn’t realize it was going to heat.

Hi there just wondering about the water temperature. I see it only has a cold inlet. Does this mean that the machine heats the water up as i can see the machine has a temperature choice? thank you.