Fisher & Paykel Double DishDrawer Series 7 DD60DAW9 Questions & Answers
MPNs: 36515049 and DD60DAW9
- ✓ Verified company
How do you stop/cancel once a cycle has started? The only thing I can find in the instructions is now to stop a delayed start, but not a standard cycle. Thanks!
Just press the start button, it will pause the cycle, press again to continue.
We do it all the time when we add some extra dishes that missed the start.
I have a brand new fisher and parked model DD60DAW9 first time using bottom drawer a code A3 comes up what does this mean?
Not a clue...ring F & P...I'm just a purchaser like you
As listed page 44 of manual How to attend to a fault:
A3 draw cannot drain:
Possible cause: The drain hose is blocked or kinked or the connection to drainage pipe may be blocked.
What to do:
1. Ensure the drainage hose and connection to the pipes are not blocked.
2. Press stop once to stop the beeping, and then again to clear the fault.
3. Press Start to resume the wash program.
Howdy anybody. Before I leave NEGATIVE FEEDBACK on this machine, does anybody else have a problem with these double draw NOT CLEANING properly? We have to wash the dishes before putting them in; even then, on the Normal setting it still doesn't do the job properly with bits of food still stuck to plates & bowls. And we never use the Quick wash option because it's useless. We don't bother using the tablets anymore, because they never disolve no matter where we put it, so we just use powder. We've had the machine for about 3 months, and the only time it does a proper clean job is on the Heavy setting; and again, that's after washing everything first! It is never overloaded, no pots or pans, just dishes bowls cutlery glasses cups.
Are we doing something wrong (aside from spending WAAAAY too much on this machine)?
Any suggestions would be great?
Thanks.
Yes exactly the same problems, would not recommend it
This usually happens to us when something is stopping the spray arm from rotating, if a knife or something else projects below the rack it stops the arm rotating, the machine goes full cycle but doesnt clean or desolve the cleaning tablet, just check the spray arm rotates.
Can I adjust the height of the racking system so that my 27cm dinner plates fit? They currently don't fir either the bottom or top drawer
The User Guide on page 14 states that for DD***A Models, the racks are a fixed height, designed for best performance wash. I find them too high as well for big plates but it looks as if we can't adjust them. The CC***C Models have adjustable racks. So I think we are stuck with that problem.
Thanks for your answer. I think you're right that we are stuck with the shelves at one height.
Get an answer from our members and Fisher & Paykel representatives
ieatwords.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ieatwords.com.au may earn commissions for products/services purchased via affiliate links.