Viccon Deck and Fence Deck Restoration Kit For Film Forming Sealers Coated

Our 8 year old tallow old deck needed stripping as the previous decking oils used by the original contractor had reacted badly. The stripper had to be used in some spots 3 times, after application of stripper and keeping it moist water blasting was ineffective and it had to be scraped first, a second application was needed, and a third in some spots. The deck clean was applied and was fine however the deck still needed to be belt sanded and the edges done with an orbital sander. Be prepared to do a lot of work if you want it to look like new.

The product does everything it says it will do. In my case previous owners had slapped so much stain on the wood thst it needed to be stripped twice. I think users should be made aware that once you start pressure washing the removed stains goes everywhere literally which I wasn’t prepared for. You need to cover all surrounding areas with plastic otherwise as in my case I had to repaint house walls, scrub glass windows etc as the stain turns to a sticky sludge.
On my second project using the products I was much better prepared so it wasn’t so ...

The stripper did a very good job generally except where coating was in very good condition and so needed a second application. Restorer again very good and the result was excellent.

It took longer than anticipated to remove the stripper but the results are well worth it.
I Would thoroughly recommend. Happy to provide further photos of the entire deck if required.

I used wood finish stripper on Sikkens Cetol.?Put it on by roller early morning left for about 90m, scrubbed with a deck brush, then all the old coating came off with a gerni.

Product worked very well. A bit thick for the sprayer I purchased, so will have to work on that, but worked very will. Very happy with product and have purchased more.

Great product used to strip off at least 6 former coatings efficiently & effortlessly. Following sanding and recoating with Haynes water based product original decking back to new. Very highly recommended.

What can I say other than the product just works, also I needed it last minute and delivery was lightning fast and the customer service was excellent to say the least

Put on as per instructions and it has worked!! Followed with deck rejuvenator and so far happy wirh results. Next step sanding then oil. Much cheaper option than paying professional

I used this product to strip back Intergrain Ultra Deck timber oil from a patchy deck coating (some sections under cover and as good as 3 new coats and some exposed to weather and starting to lose the last coat). Long story short removed almost 95% of the the finish from all parts of the deck. It did struggle with in between deck spacing primarily due to vertical surfaces and required additional coatings (Per advertisement). Overall can't be happier as it was cheaper than other timber finish strippers. Some tips included on their website and pa...

I needed to easily renovate the water based deck sealant and oil based timber screen. The product was easy to use and effective removing all sealant and making renovation easy.

This is an excellent product for removing old stain and oils from decking, application is super easy and it’s very effective. Definitely easier than sanding. A great professional grade product

We had at least six coats to get off our deck and followed the instructions. It barely came off with the pressure washer and we ended up using it and a hard bristled broom to try to scrape it off. It was a nightmare. We had to buy a second lot of the product to do it again. We still had to scrub it while pressure washing. I never want to have to do this job again. Maybe our product (Intergrain) was just hard to remove.

Product worked very well, still lots of work and time but way better than sanding! Had to repeat in a couple of small areas but generally very effective from one treatment.

Was a little sceptical about the claims but it looked legit so I decided to try it. Our deck is a hardwood merbau about 12 years old and hadn't had any treatment (recoating etc) for at least 7 years. The timber was grey and marked and colour varied significantly. One section under cover and the other contatly exposed to weather. After pressure cleaning then applying the stripper as directed the timber then pressure cleaned again quite easily. However it did take a few hours of slow back and forth with small domestic pressure washer to move the ...