Read also:
lumina vacuum food sealer instruction manual me frank credit card review aldi 55 inch tv 4k aldi slim and trim rapid shake bauhn noise cancelling headphones 2017 fisher and paykel wh7560j1 review
Workzone (Aldi) Titanium Circular Saw AUS8000Tbs
CassAU
- 29 reviews
- 1 like
Excellent tool for little mess
I have been using this twin blade saw, may be with enough experience with the tool to provide an opinion. It is 550W counter-rotating blade circular saw (240V). I found that it is very handy to cut board less than 25 mm thick (practically the depth is~ 16mm once the shoes attached (the guide to allow sliding on work piece 's surface), the cut is 4mm wide, a bit wide cut but due to the thickness of two blades (~2mm each).
The saw cut is very clean on both side of the cut board. I use mostly for wood and particle boards but it is supposed...Read more
ly working ok with plastic board (need to use the lube stick on the blade to avoid sticking). I read a number of reviews on twin-blade saws (in general) and noticed that people do have over-heating problem due to the possibility of blade rubbing. I did not find this to be a problem for this tool, may be I was conscious enough about this issue and did not overwork the machine. During cutting, I would advise not to cut too fast, especially for thick piece and always wear safety gears (eg hearing protection and safety glass - but wearing thick gloves may interfere with the power trigger). Due to its blade counter rotating nature, the cutting forces acting on the teeth are cancelling out so it has veritually no kick-back. It is rather noisy and due to the amount of material to be removed (4mm wide cut) quite a bit of saw dust. As the result it is advisable to cut at location where you can clean up conveniently (eg near a door or in the garden). A spacing tool was provided with the saw to guide the cut if required. Also a couple of lube sticks to be used on non-wood material (I have never tried). The following list is the pros and cons that I can think off. The positive points, to me is well out-weight the negative aspects. BTW I use this tool a lot and now hardly use the normal bigger single blade circular saws.Similar opinion? Write a review on ieatwords.com.au!
Questions & Answers
PHIL J.asked
The photo depicted here doesn't look like the twin blade model!
1 answer
Sorry, I did not submit that photo with the review. Don't know why it is there.
The twin blade model what I got is much more compact and not battery operated. BTW I have just checked: the depth appears fixed - not adjustable. Max depth is not a lot any way.
PHIL J.asked
How do you adjust the cutting depth?
2 answers
I do not think the depth on the twin blade saw is adjustable.
( However, on the larger battery operated (Aldi) circular saw there is a small knob on the left side close to the battery pack for depth adjustment).
Fair enough! The reason I originally asked was because the manual said:-
C) Adjust the cutting depth to the thickness of the workpiece.
Apparently, not with this one?
Other Circular Saws
Makita 5606B
5.0(1)Milwaukee M18 2730-20
5.0(1)Triton TA 235CSL
5.0(1)Makita HS301DZ
5.0(1)Makita BSS611Z
4.5(2)Ozito CSW-7000
4.3(3)Ozito CMS-1621
4.2(5)Ryobi 18V One+ R18CS-0
4.0(1)Hitachi 235mm
5.0(1)ieatwords.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ieatwords.com.au may earn commissions for products/services purchased via affiliate links.