Mitsubishi Lancer CE (1996-2003) Questions & Answers (page 3 of 3)

That doesn't seem right -:you have the option of taking the car to a Mitsubishi australia workshop or perhaps a auto electrician workshop may be able to help.
I also found that ultratune are experts in diagnosis and repairs of faults

Hi Lance,

Sorry you would have to contact an authorised Mitsubishi service department with your question.

Hi Chris,

It should fit with no worries! Since it's the same model and only a few years earlier, the measurements of the headlights and tail lights are completely the same :)

Hi Malcolm,

Yes, you will be able too! You just need to be careful while replacing the normal springs back onto your vehicle :)

Hi boo,

No, it will not unfortunately. Springs fit different cars because of the size and model. You need to find springs that will specifically fit your mazda 6.

Ok is your lancer a Gli or Glxi? Was central locking a factory fitted extra? Was it working before? The factory immobiliser reader is in the steering wheel column and only 2 keys can be coded to start the vehicle. Was your immobiliser part of the after market car alarm system? This can be bypassed by a car electrician but the factory one does sound like it's working as your car can be started and used normally..

Yes it's a gli with factory immobiliser and central locking factory also.

Should be fine as there was no shape change during this era
Best to check with Mitsubishi spare parts if they vary with a 1999 to a 2001

The 20 amp wiper fuse is under the dashboard to the right of the steering wheel, it's fuse # 26, the 10 amp stereo fuse is #9 and is in the engine bay passenger side.

I doubt it as the 4g63 evo motor will have different gearbox mounting points and running a awd evo gearbox to a 4g15 (1.5 litre) or 1.8litre will sap a lot of power away when applied to the ground

SCA and repco sell those in different sizes. Otherwise ebay.

Hi, Your temp gauge should not pass half way mark on vehicle, If it is I would advise you get the thermostat changed as could be faulty. Coolant should be changed with Mitsubishi Genuine coolant not after market stuff. Do not add water to it as it's an hybrid coolant that does not get mixed.

Model number is still the Ce, ce2 and ce3
The factory differences between the standard lancers and the vrx, are the vrx gets a small spoiler, clear tail lights and engine sway bars in red or black.. Engine is still the same also I think the suspension is slightly stiffer.

No

Gli coupe no
Glxi coupe yes
Mr coupe yes

I am not sure though you could try contacting Mitsubishi Australia or you could try google Australia on.the internet to answer the question.

I have a 2011 cj lancer sx, when the driver's door lock knob is rotated to the lock position, the other three doors also lock and will unlock from that position if riuuired .