- Sign in
- Write a review
Navman MY670LMT Questions & Answers (page 2 of 6)
110 questions from our users
Hi Nav support,
It's been a while since I used my device and I forgot my pin number. Is there a way how to use again my device and get rid of asking the pin number. I tried the hard reset still I am prompted with the pin number entry. Appreciate your help. Thank you.
Hi Farren,
Thanks for posting your query....
Read more We are happy to assist you in removing the security PIN on your device. Please follow the steps below: 1. Launch the NavDesk2 software. 2. Connect the unit to your computer. 3. Once the unit is synchronized to the NavDesk2, click on My NAVMAN. 4. Click on Check on the Lock Device section. 5. Enter your log in information and leave the PIN section blank. Hope this helps. Otherwise, feel free to contact our support team at [email protected] Kind Regards, The Navman TeamI can't locate anymore my cd software that comes with it. Can we download somewhere the said software?
Hi Farren,
No worries, you may download the NavDesk2 software from the link below:...
Read morehttps://www.navman.com.au/navdesk-update Kind Regards, The Navman TeamMy Navman touch screen doesn't work
Call the Navman technician
Hi Clem S.,
I am sorry to hear that your device’s touchscreen does not work. Not to worry, I am here to help....
Read more The first thing I would suggest is to charge the device via in-car power/AC adapter for 30 mins or 1 hr via USB cable to your computer. Then while on charge, perform a hard reset to the device by poking the reset hole at the back. If the problem persists, we may need to perform Smart Recovery on the NavDesk2. Please follow the steps from the link below. https://service.navman.com/M0100/F0110_DownLoad_Faq.aspx?bullid=AllBull&faqid=131869 *** Please do not click the link, you will need to copy it and paste on your search bar. If it's your first time visiting our FAQ site, select a region first then try the link again. sorry for the troubles.*** NOTE: After performing Smart Recovery, your unit may start up with a calibration screen (not available on all Navman devices). If so, you may use a stylus or a paper clip to gently press and hold in the middle of the crosshairs (it has 5 crosshairs). Follow the sequence to calibrate the screen and ensure to accurately press and hold to make the calibration successful. If not, the calibration screen will not go away. Hope this helps. Otherwise, feel free to contact our support team on [email protected] Regards The Navman TeamI was out of town fora month. Navman doesn't seem to hold charge, comes on, then just blacks out. Tried resetting butthat didnt help
The battery life fully charged will only last for about 1 hour..It needs to be connected to the charger at all times..If the battery is really low then it won't start up...Charge battery before use.. Doug
Hi MonaB,
Thanks for posting your query....
Read more Doug is right. The battery is not to be used or relied upon as a sole power source because your device is designed to be connected to the Navman in-car Power Adaptor at all times. With default settings, battery life generally ranges up to 15 minutes. Hope this help. Otherwise, feel free to contact our support team on [email protected] Hey Doug, thanks for the helpful tip! :) Regards The Navman TeamMy Navman MY670LMT GPS will only work if it is constantly connected to the cigarette Lighter charger power supply. As soon as I disconnect it from the power supply my GPS switches of. And sometimes it...
Read more switches off when it is connected to my power supply. Why is it doing this. This is so frustrating.i have a 670lmt i have just updated the unit and now it is frozen on the start up page,how can i fix this
Hi Graeme,
I’m so sorry to know about that....
Read more The first thing I would suggest is to charge the device via in-car power/AC adapter for 30 mins or 1 hr via USB cable to your computer. Then while on charge perform a hard reset to the device by poking the reset hole at the back. If the problem persists, we may need to perform Smart Recovery on the NavDesk2. Please follow the steps from the link below. https://service.navman.com/M0100/F0110_DownLoad_Faq.aspx?bullid=AllBull&faqid=131869 *Note: if it's your first time visiting our FAQ site, select a region first then try the link again. Hope this helps. Otherwise, feel free to contact our support team on [email protected] Regards The Navman TeamThe link you sent does not work it must be a navman thing hey, this unit is only 12 months old and has already been exchanged due to being faulty,iam I best to contact consumer affairs as this is unacceptable
Hi Graeme,
Please do not click the link. Instead, please copy the whole link then paste it on your search bar. Sorry for the troubles....
Read more Regards The Navman TeamMy navman MY670LMT screen is unresponsive. i have tried to reset it and i can do all of that but as soon as it powers back up i have the same problem and cant click accept to the safety agreement!
Check batter is charged .Contact Navman technician
Hi jayden,
Sorry to know that you're having such troubles. It sounds like there may be an issue with the software of the unit....
Read more Apart from reset and charging the battery, you can also try performing a Smart Recovery via NavDesk2. For instructions, please click here https://service.navman.com/M0100/F0110_DownLoad_File.aspx?bullid=AllBull&fileid=114762&Region=Australia%20NAVMAN&Language=English%20NAVMAN If still the same, please send us a private message with your Name, address, phone number, email, Model, serial number and date and place of purchase so we can create a Repair ref number and can arrange to have your device tested at our repair centre free of charge We apologise for any inconvenience and hope we can resolve your issue thank you The Navman TeamI have 2012 ssve redline and Navman has suddenly disabled
Hi Rebecca,
Thank you for your question....
Read more To assist you better, may I know what is exactly happening to your device? Kind Regards, The Navman TeamIs there a way in the MY670 to add a trip to the trip log (for tax purposes) without having to set the location prior to departure and use the device for guidance?? (I.E I am driving somewhere and I know how to get there but would like to log the trip)
Hi T Gitt,
Thank you for your question....
Read more Unfortunately, a destination is needed for Digital Logbook. This is due to the NavDesk 7.50 generates your trip details and output mileage report, including distance, start and end locations, time of travel and fuel consumed to make doing your expenses and taxes quick and easy. Feel free to contact our team for any other concerns via [email protected] Regards The Navman TeamThanks for your response.
Kindly...
Read more TimHi T Gitt,
No worries! :)...
Read more Regards The Navman TeamHow do I unlock my frozen MY670LMT?
Dear Dave,
For online self-technical support, please visit our FAQ site: http://service.navman.com....
Read more Alternatively, you can email our support team on [email protected]. Regards The Navman TeamHow do I unlock my frozen Navman MY670LMT
push the reset button on the back of the unit..if no success ring Navman technician
Dear Dave,
For online self-technical support, please visit our FAQ site: http://service.navman.com....
Read more Alternatively, you can email our support team on [email protected]. Regards The Navman TeamI have just paid for a MY690 LMMt before reading the reviews which appear to relate to the model 670. I have had three NAVMANS and the last one a 570 purchased because it had bluetooth and some low life took it . What I;m asking is that the bugs in the 670 been fixed in the 690 model
Dear Rob Weston,
For online self-technical support, please visit our FAQ site: http://service.navman.com....
Read more Alternatively, you can email our support team on [email protected]. Regards The Navman TeamHave just updated NAVMAN 670LT but it now keeps saying unable to acquire GPS signal and unit is getting hot whilst it keeps searching
Contact Navman Technician first for help
Dear Gazman57,
For online self-technical support, please visit our FAQ site: http://service.navman.com....
Read more Alternatively, you can email our support team on [email protected]. Regards The Navman TeamLike a lot of other reviewers, the battery life on this is terrible! What can I do to improve it? After fully charging it up to green light stage, the battery is dead after only 30 mins of driving. It is plugged into the 12v car charger constantly. Help!
Hi Hayden,
30mins is actually really good given that Navman keep stressing that the battery is "Just a back-up". A lot of people seem to be having the same problem I do which is that, since new, the b...
Shouldn't it be charging whilst I'm driving though, as it's always plugged into the car's 12v cigarette lighter plug and the orange light is glowing on the Navman (although it never reaches a full cha...
Read morerge of green whilst I'm driving). Never had this problem with my previous Navman (albeit it was a smaller 5" screen).. I'm wondering if it's because the MYLM670T has such a bigger screen that it uses a lot more battery power, or is possibly faulty. Hard to know, but I'm at the point of thinking of buying a different Navman as the "battery is low" warning when you end your journey is so irritating.Dear Hayden C.
For online self-technical support, please visit our FAQ site: http://service.navman.com....
Read more Alternatively, you can email our support team on [email protected]. Regards The Navman TeamMy 670LMT has been a great unit, until I did a map upgrade a couple of weeks ago.
Since then the unit has black screened, continually has an orange charge light on and has now started flashing between a green charger light, to a yellow glow or orange?? After shutting down now, it also does a full restart, and not resume as it previously did.. Hoping you can shed some light on what has happened. Thanks Craig
contact your Navman Technician...Doug
Hi Craig,
Sorry to know this and for the delay. Have you tried contacting our support this past 29 days?...
Read more If not, please follow the troubleshooting steps below: 1. Charge the unit for at least: o 30 minutes using the car power adaptor with the device turned off. o 30 minutes using an AC adaptor o 1hr via USB to the computer 2. Perform a hard reset on the device. You may click one of the links below for the steps. MOVE-EZY-MY Series 2012 and above – CLICK HERE Note: If it's your first time to visit our FAQ site, you need to select Australia/New Zealand and then click the above link again to be directed to the correct site/page. 3. If the unit is still showing a blank screen, connect it to the computer. If the unit is still recognized by the computer, you may need to perform Smart Recovery using the disc that was supplied with the device upon purchase. Please note that this process can only be done using a compatible Windows computer that has a DVD drive. You may CLICK HERE for the steps on how to reinstall the software on your device. Hope this helps. Feel free to contact our team for any other concerns via [email protected] Hey Doug, thanks for your suggestion. Regards, Navman Support TeamWhere to get a battery for navman my670lmt as it is flat as soon as 12v is disconnected
Contact your navman technician
I am sorry but that is not an answer thank you
Mine has always done the same thing since new. Very poor quality battery. I see from reading other reviews that the battery is not replaceable. I brought this issue up with Navman, along with other is...
Read moresues, early on after I bought the unit. However, Navman support was most unsatisfactory. From all the reviews I have read, the battery issue is very common as is the issue of inaccurate speed limits and warnings. My old MY60T had none of these issues.We bought a NAVMAN MY670LMT in 2017 do I have to upgrade any maps or does it automatically do it. We are travelling through NSW shortly and want to bypass Sydney. JEAN B
upgrade maps using nav deck..they are free upgrdes
My navman will not update via navdesk . Keeps saying update failed.
Bluetooth pin
My Navman does not turn off automatically when I shut down the car engine, I can't find a setting to change this so it stays in till power is lost. Also can I get the map straight away when I switch it on instead of having to accept the first screen, and how do I power straight off rather than sleep or lock? Thanks for your help.
Auto power off, is built in when power is switched off,,.Starting up unit ...make sure battery is fully charged..If battery is low, unit will not go straight to maps on screen.
I realise that it should automatically power off, but it doesn't, hence my question. I was wondering if there is a setting I am missing which will turn it off automatically. I will fully charge the ba...
Read morettery and see how it goes with the maps. If I try to turn it off, it goes to sleep or lock, which I am not sure what option i should choose.Why have I lost time and date? Menu screen says 02/01/08 - neither time or date can be adjusted in settings. No ETA or time displaying in maps. Help please.
why does my touchscreen stop responding
Hi I'm on my way to New Zealand and need to know how to change my maps to New Zealand on my Navman? thanks.
Contact the Navman technician... NZ maps can be downloaded from the Navdesk..
Hi Brian,
To change your map from AU to NZ, please follow these steps:...
Read more 1. From the Main Menu, go to the Settings. 2. Go to My Maps. 3. Go to Map Set. 4. Select NZ and confirm. More questions and answers can be found on our website: navman.com.au or navman.co.nz and our support website: service.navman.com Thanks! Navman Support TeamGet an answer from our members and Navman representatives
Other GPS Navigation Systems
ieatwords.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ieatwords.com.au may earn commissions for products/services purchased via affiliate links.