31 questions from our users
Andie B.asked
Can I use essential oils in my TAAV vaporizor? Or just the menthol fluid? Because that’s all I can find and I was hoping I could mix oils with it.
Belinda L.asked
Bought the TAAV Vaporaire a few weeks ago and went to use it and the light to show its on, isnt working. What can ido?
1 answer
Take it back. I really wouldn’t know what it means. But for safety I would be returning it.
Debraasked
I bought the TAAV Pro a couple of days ago but um unsure where to put the eucalyptus? Do I put it in the bigger hole at the back or the one at the front where the steam comes from?
I like to be able to smell it at night and cannot at the moment.
Also can it be run just using water? Have noticed I’m not as stuffy in the morning.
George2asked
How do I use tablets to clean vaperiser
1 answer
You put a tablet in every time you use it. I think it tells you this on the tablet bottle.
Melissaasked
My TAAV 2008 is making a whistling noise, I have rinsed it out several times with no improvement. Any suggestions?
Amity B.asked
I have a taav vaporizer pro can i get the top off to clean it? Also it keeps starting then turning off why is this
No answers
Roxyasked
Why is my vaporiser spitting out water
1 answer
Needs cleaning like mine does. I can pop open my water container and clean it. I just rinse it and wipe out if needed.
Takes a bit of effort but you should be able to do it.
Maxasked
My Taav Vapor Pro stops working recently. How do I claim warranty?
No answers
KH2018asked
I brought a T2000 secondhand. Is there a way of making it steam more? Can I move the small arrow dial above the eucalyptus liquid section from high/light/low to change the steam intensity?
1 answer
yes you can. Soft and hard water may steam and potentially " spit" differently, so this allows you to vary the amount of steam. I use a screwdriver to move it.
Batoulasked
I just bough the TAAV T2008 model and when I turned it on, it doesn’t look like it’s doing anything. Am I meant to see the steam come out? Or is it so super quiet that you can’t even hear or see anything? I’m confused
1 answer
The water has to heat up to boil before the steam begins. Takes a while. Once at the boil I could see steam billowing out, but no sound.
Jadenasked
I have the taav vapor pro and I have lost my instructions on how to clean it does anyone have it?
1 answer
all I remember was you were advised to rinse it out after use and stand upside down to drain and dry. Other wise ring the manufacturer or look up online to see if they have instructions there.
Sandyjasked
How are you supposed to put the cleaning tablet in this product ? And is there an antibacterial cleaner available as l know mould forms inside the chamber removing lime scale is important but more importantly is removing bacterial infestations
Mariaasked
Hi! I have a Taav T2008 vaporiser which we've had for maybe 5 years now. I last used it last winter and forgot to empty it. Now I notice a little black spot inside which I think is mould. I have Taav cleaning tablets but it states to use only for electrode type vaporisers. Is the T2008 an electrode type one? And the tablet doesn't fit too. If the tablet can be used on this model, should the tablet be crushed or halved?
1 answer
I think this is a query which should be directed to the Company. I'd think if it has lasted 5 years maybe I would buy a new one.
Skyeasked
We have the OLD Taav machine, but we put some vicks vaporiser liquid in the machine- now im worried i have done the wrong thing? Is the vicks vaporiser safe for babies? It doesn’t say anything on the bottle. Also it smell very strong!
1 answer
I've never used the old one, but I would imagine you could use Vicks liquid - it's made for vaporisers. I suggest if it smells too strong dilute it more. use less of it in relation to how much water you have in the machine, and don't put it too close to the baby, just have it in the room, it will soon spread around. I wish I had one when my children were little and had croup.
CraigCasked
Do I put any other products in the water when using the TAAV 2008 Vapouraire for the units maxuim & it's best vapourising output & for the products optimum result when using the TAAV 2008 vapouraire besides !the actual water I'm filling the TAAV 2008 vapouraire Reservoir with besides the product each time when I'm cleaning the Vapouraire unit?
1 answer
Well Craig, I know they recommend their product but I am very keen on eucalyptus, so i put in a teaspoon of eucalyptus oil with the water. After I finished the session I just rinsed it out with plain water and let it drain upside down.
Julesasked
Ever since we bought the item it Blows water vapour even when not filled to water level. Any ideas?
No answers
Stephie Basked
Hello I have the Taav Vapor Pro, but have not used since last winter and now the inside has mould in it. As you can't take it apart I cannot scrub the mould off - does anyone have any ideas what I could do?
I have soaked with vinegar but I can still see the mould - any help would be greatly appreciated :))
1 answer
There are Tavv cleaning tablets available at chemist warehouse. From what I understand you simply pop a tablet into the water whilst in operation.
- ‹ Prev
- Next ›
ieatwords.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ieatwords.com.au may earn commissions for products/services purchased via affiliate links.