??!

89 questions from our users

Susan G.

Susan G.asked

My fast forward rewind has stopped working how do I get it to work again on fetch mighty



1 answer
duncan.gough1
duncan.gough1

I’d suggest the remote control is stuffed. They’re a pretty average device at best. We bought a new one off eBay.

chris

chrisasked

I turn the fetch box off, but the tv does not turn off.

Same for when I turn the box on the tv doesn't turn on

3 answers
chris
chris

Thx I'll try that



Tammy
Tammy

Hi chris
I have two separate remotes. It would all have to do with your current set up.

chris
chris

Thanks

Toad

Toadasked

One of my Fetch Mighty's has a critical hard disk error - I think due to a local power spike - but is out of warranty by 6 months. Fetch have absolutely no repair facility or service agents. I presume I could get a good hdd out of one of my working units and copy it. Has anyone ever successfully cloned the Fetch hdd and installed it to resolve an issue like this ?

No answers
Theo T.

Theo T.asked

How can i get the next video to play automatically when I am in MyHub?
I have multiple videos in the folder but it just plays one and stops; how can i get it to automatically play all the videos one after the other?



No answers
Anne B.

Anne B.asked

Can I take my fetch box to my mum's when I stay there

2 answers
Fired Up
Fired Up

I do not see any reason why not. Test it out and report back.

duncan.gough1
duncan.gough1

Should work, though I am not sure how the OPTU$ ones will go.

tricia

triciaasked

Can I watch the 5pm version of the news at 6pm on the same day or do I need to wait longer such as the next day?
Thanks
TriciaV

4 answers
Bent O.
Bent O.

I don’t understand your question.

tricia
tricia

Maybe let me say it another way. If I go to watch some news how do I watch the most recent version but not live so no ads. Eg if I sit down in front of Tv at 6pm and want to watch 5pm edition of news so I can skip ads. How do I do that. I have not used fetch before so I need to be stepped through it. Thanks

Bent O.
Bent O.

Sounds like you need to read the manual.
Short version :-
1. The Fetch has the ability to record shows.
2. Press TV guide and select the relevant show then press the red R (record) to record your 5pm news.
3. At 6pm playback the pre-recorded news.
4. You can fast forward by using the remote (the double arrows-more presses = faster; or silver arrow=5mins skip).

PS: my info is based on my current unit and remote. Your may have an older model with different controls. If so you will need to check the manual that applies to your unit.

fredofrog11

fredofrog11asked

my fetch mighty stops recordingmovies before the end why is this happening ?

3 answers
Bent O.
Bent O.

Are the movies running later than scheduled ?

fredofrog11
fredofrog11

no it gets to about 10 mins before the end then stops

Bent O.
Bent O.

These units are very temperamental and, like PCs, require restarting. Try it out first, then either contact your service provider (if applicable) or Fetch directly if it persists.

Mick

Mickasked

Do I need to turn fetch tv off all the time or can I leave it on and just turn our tv off

1 answer
Bent O.
Bent O.

That is what I do

Paul berg

Paul bergasked

Does Netflix replace it

3 answers
Lea
Lea

No Netflix is a streaming service
Fetch is a PVR type box that facilitates
Netflix/Stan/Catch up / record live TV and rental of movies etc

bl11nx
bl11nx

fetch is a "smart" tv without the monitor.
does that hel?

Bent O.
Bent O.

It uses Netflix, Stan etc.
Check their website for correct details

Pam W

Pam Wasked

When trying to view recorded programs my Fetch displays an error “Playback failed for show”
Have powered off to reset but no joy. Can’t find any resolution online

2 answers
Fired Up
Fired Up

Asked earlier.
I just did a quick web search and it could be a power problem or disk error. Suggest you research more or contact Fetch.

Lea
Lea

Don’t bother contacting Fetch they will just offer a refurbished replacement. Try turning the box off for 24 hours unplug all leads and change the HDMI cable for a new one if you have had for a while it worked for me so far. However your recorded program is lost. Fetch can send you instructions for a full re set but you loose everything
Cheers Lea

Bbb

Bbbasked

Can you have two separate fetch mighty boxes in the same house. Totally separate from each other

2 answers
bl11nx
bl11nx

yes they say you can.
i guess you'll need two tv aerial out/in lets.
or better ethernet cabling.
you just connect to your home wifi as you would with other.

did i say that i returned mine.
a week ago,
for testing, repair or money back.

I've heard nothing back from harvey norman as of yet.

I absolutely was sold on the possibilities of having the unit.
recording 2 or 3 shows at once whilst watching, pausing a show.
plus internet options.

id only just dumped foxtel because of the cost, (wife said to)

I had nothing but trouble with the tv screen freezing when using my fetch.

the trouble shoot guide sends you around in circles.
that is to repower the unit.
if you're looking for a quick phone con with tech support,
dont both.

send an email and they'll email you back with recommendations to check the fault find guide.

did i mention the fault finding guide?

now i wait,

but the positive is i don't have to sit through all the recorded shows my wife likes.

Fired Up
Fired Up

Basic answers can be found in their website

Tiger Y.

Tiger Y.asked

how can i turn off sleep mode

1 answer
Fired Up
Fired Up

Suggest you check in the manual or contact Fetch

Pauline

Paulineasked

Can you stand your tv on top of the fetch box

1 answer
Family H
Family H

Depending on the base arrangement of your TV, I suppose it’s a possibility. We’ve returned ours due to it being faulty (read my review from last week for details), but from memory it’s about 5cm high, and perhaps about 20x20cm base(ish). However, it ‘overheats’ VERY easily and I’d assume this will mess with that element of the box.

Troy K.

Troy K.asked

How do i remove and change netflix acconts

1 answer
Fired Up
Fired Up

Ask Fetch

Robyn

Robynasked

there was a glitch in my internet and now the fetch mini will not playback from the mighty. I have done a soft reset but the problem still persists. I have disconnected all cords and left it overnight then did the reset. but still cannot play recordings from the mighty. Any suggestions please.

1 answer
Robyn
Robyn

My problem is solved. rebooted modem then the mighty then the mini and made sure the mini was paired with the mighty on advice from Fetch. Never thought to reboot the mighty. Live and learn

Bhewi

Bhewiasked

My Fetch Mighty has stopped Fast forwarding, when fast forward is pressed the pause indicator comes up but nothing

No answers
Christine_Regan

Christine_Reganasked

how do I turn off subtitles - have tried everything I could think of - don'y know how they got turned on and

I can't turn them off

2 answers
John
John

On remote press 1,2,3 button on top left. Keypad will light up: press text button.

Christine_Regan
Christine_Regan

Thank you for getting back so quickly - all fixed now - thanks again

Chris

Chrisasked

Hi, I just bought a fetch mighty box. I really only want to nuse it as a pvr. Do I need to be connected to my Wi-Fi to watch normal tv? If so, how much of my data will it use? I only have the data I get with my mobile phone so not a huge amount and was not made aware of having to use WiFi to watch normal tv.

5 answers
Michael Czajka
Michael Czajka

It has 4 tuners inside... so unless you're locked to Optus you shouldn't need to go online to unlock it?

Chris
Chris

Ahh, that sounds good. My mobile is with ALDI so through telstra. I know nothing about these things, so I would just need to connect to WiFi to set it up, I can't seem to skip that part?

DZB
DZB

Yeh it needs internet all the time, but won't use a lot of data if u don't watch internet channels. It uses internet for the program guide and software updates which are random. Keep an eye on the usage until u know what it's using.

David B

David Basked

Can i use the fetch mighty box simply to stream fetch content without an antenna

1 answer
Chris
Chris

I'm not sure, I assume so, I haven't tried it. Would also depend on if they allow you to pass initial set up of the box without a working antenna connected

Bevis

Bevisasked

How can I fix the problem of the Fetch not responding to the remote? Especially when rewinding or fast--forwarding recorded programs, when I press "Play" on the remote the box often wont respond for up to a minute, in which case it has gone waaay past where I need it to stop and play. Remote batteries are fine and I can see the box acknowledging the remote.

2 answers
Chris
Chris

I wouldn’t know. But I found sometimes a restart. I did find sometimes when I removed the antenna the remote would respond after 30 seconds or so. I’d try sending fetch an online message, as that’s the only way to get in contact with them and wait for a reply by email

Fired Up
Fired Up

A restart is always my first go to.
Please share the outcome.

Page 1 of 5

Get an answer from our members

ieatwords.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ieatwords.com.au may earn commissions for products/services purchased via affiliate links.