Fisher & Paykel QuickSmart Front Loader J3 Series Questions & Answers

After moving house, reconnected washer and put a cycle on. Half way through got the message, Clr filter. Followed the instructions and restated the cycle. Got the same message, followed the instructions. Then did a spin cycle. Eventually the machine turned off (like it had finished) put another cycle on and got the same message. Any suggestions? Thank you

How do I get a user guide?

Why is this machine which I purchased 4 months ago putting small holes in my clothes? I see someone else has been having the same problem (Ben above 3 mths ago). Is it as PoodleLuva suggested because they are made in Asia and use cheap parts? As I am still under warranty I assume I can get a replacement machine.

Having issues with Error 37, have drained and cleaned out filter. I did find a small hair band right at the back under the impeller but I'm still getting the error. Is there a way to remove the impeller to clean behind it like older models?

My machine keep coming up clean filter I done it a number of times but during the cycle it does the same thing

fisher and paykel washing machine model WH7560J3 malfunction lock. the door is open but the lock is in lock position so how can i release the lock into normal position?

I got this washing machine and have a problem these days.
It will alsways automaticly enter to the key lock mode and made the beep sound.
Even when the washing machine is working, the key lock mode will automaticly run and made the beep sound very often.
And we i poen the power, the key lock mode will automaticly run and i need to press the key lock 2 secs to unlock the control panel
Is it sth wrong with the system?

What cycle do I use to wash woolens

I want to replace the drain hose with a longer hose but the washing machine connection end is unreachable from the back of the machine. Is there a specific way to replace the hose?

To the F & P technicians,

I have a Quicksmart WH7560J3.
I generally use the Everyday cycle (1:04 minutes) for all clothes including cottons, but am intrigued by the Cottons cycle (2:22 minutes).
Both cycles are described as being for “Normally soiled everyday items” so see no obvious reason to use the Cottons cycle especially as it takes twice as long.
How does the Cottons cycle differ? Is it slower because it is more gentle?
Why might I choose it even if it does take longer?
Thanks for your reply

I would like to know the water consumption of each setting of this machine. I cannot seem to find this information in the online manuals.

Can I add a garment with this machine and does it have the drawer to accomodate washing powder and dispense the correct amount
Thank you

Over the last couple of days, after a cycle has finished the machine appears to be continuously filling with water. This evening it burst the door open and a load full of water came rushing out. I could hear water running into the machine until I turned the tap off at the wall. Any idea why this would be happening?

My washing machine keeps filling up with water, and it doesn't matter what cycle it is on. Then it comes up with error No Tap ? I've checked my taps and water all good in that area. And it also fails to drain properly on spin cycle. Confused and thinking its maybe a sensor problem?? Any advice would be greatly appreciated plz and thank you

Hi there, my F&P frontloader is showing out of balance, I've re-distributed the load and it goes out of balance again, finishing a load takes forever. What could be the problem?

I was cleaning out my washing machine filter, but when pulling out the little drain pipe “150mm” it detached. I am still under warranty, but if it’s a quick fix, I am happy to sort it... Please help?

My brand new F & P 8.5 kg front loader continually has ERR 74 and I cannot use it......the machine is level.....any thoughts?

Does this machine has add a garment function during wash cycles if it does then I am sold?

Hi ... I have just put a small load into my washing machine and it comes up with error code 105 door locked. I have turned the power off at the wall, given wait time but the door is still locked. Any suggestions??

Went to do the test cycle and the machine keeps clicking and displaying door open, how can I fix this, brand new machine