??!

4 questions from our users

Mac

Macasked

QuickSmart MW60 (6kg)

Can the F& P MW 60 do cold only washing?



2 answers
fisher_man
fisher_man

mw 60?

Sam
Sam

I am not sure about MW60. Mine is MW511 and yes, you can do cold only washing with MW511.
In fact, I am mostly do cold only washing.

Bison

Bisonasked

QuickSmart MW60 (6kg)

Hi, we got our new MW60 yesterday and I am going crazy trying to figure out how to do just a cold wash. Seems that you can't change the temp setting on this one (warm wash seems to be it's thing) and that is upsetting as we only ever used cold wash with our other smart drive that was 18yrs old. Can anyone help with my dilemma.



2 answers
Rocket
Rocket

No sure as you would think you can do a cold wash, did you hold the button down to select cold, if doesn't work swap the hose from hot to cold and see how it works, if don't work ring F& P may assist in problem

Bison
Bison

Thanks Rocket. Finally got it sorted.

Margi

Margiasked

QuickSmart MW60 (6kg)

Hi,my F/P quicksmart which is 2,5 yers old never had a problem, just now suddenly as I was going to startmy usual wasing after turning it on and trying to set it sarted beeping and can't do any programming, not letting change just a few lights on and beeping even after i turn it off at the power point because can't even turn off on the machine itself, it goes on for about 10sec than it stops beeping and ....any idea what can be done? Part from calling a service man.... Thank you

1 answer
Rocket
Rocket

Hi margi
It is hard to diagnose the problem without seeing it could be the top board were you turn it on .which is about 80$ depending were you live if in Australia.the other thing could be the lid safety switch try tapping the lid or make sure the lid is fully closed if you lift the lid to the up position it will lift straight out and you can clean it .hopefully it's not the main board as its about 150$ for that board and if you can't do it yourself the service Guy is going to charge his labor on top of that .hope this helps



Elsie

Elsieasked

QuickSmart MW60 (6kg)

I always have an issue with lint, how does the machine get rid of the lint? Many thanks!

2 answers
Fisher & Paykel
Rudi K.Fisher & Paykel

Your washer has a self-cleaning lint system. The machine automatically separates the lint from the
wash water, traps the lint between the inner and outer bowls and flushes it out at the end of the
wash.

carlene
carlene

I have trouble with that too but have learned as it is not as efficient as some other machines at getting rid of the lint I am careful not to put fluffy things in with say black things. I do a white wash and a black wash and everything else goes together.

See all Fisher & Paykel QuickSmart Top Loader questions

Get an answer from our members and Fisher & Paykel representatives

ieatwords.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ieatwords.com.au may earn commissions for products/services purchased via affiliate links.