35 questions from our users
Kerryasked
Can I connect a gasmate 2 burner stove to a 3kg bottle through a regulator in my campervan
No answers
steve h.asked
got my gas mate a while ago have not used in very much had problem from the start turn gas on and it only lighted one side of the burner now it wont light seams plenty of gas there but no flame have cleaned burner and jet just no flame gas blows light out
No answers
Floriano E.asked
I'm looking to get one of this stoves for my pull out drawer in the back of my van; I want to know if they sell a L shaped plug for the stove where i can attach the standard pipe to the gas bottle, Thanks!
No answers
Pandemonium.73asked
Can I use a 9kg bottle with it?
No answers
Redasked
I have a gasmate 2 burner stove (MODEL NO. CS1095). Do I need to buy a regulator to use this with a 4kg gas bottle? Or can the gas hose be fitted straight to the 4kg gas bottle?
1 answer
No you don't need a regulator as it's built into the stove. Just put the hose and gas bottle on and it should work.
Robyn D.asked
is a bayonet type hose connection safe on an old stove
No answers
Terry S.asked
I have a gasmate two burner 1095
But I don’t have a plate.
What size plate would fit?
No answers
Curiousasked
I want to connect my 1095 stove to a gas bottle on my caravan without having to lift the bottle from the holder, what is the maximum length of hose I can use?
No answers
Ashasked
I bought 2nd hand (Gasmaster brand) 2 burner camping gas stove. The stove came with a house without a regulator. I connected the stove to the 9kg LPG gas cylinder to check it is working. Noticed a obvious gas leak (high pressure gas release sound )where the hose is connected to the stove area in the connector no holes in the hose (Unable to attach pic here). I thought the hose is the issue so bought a new hose to check, but the same issue exists. I am not sure gas pressure from the bigger LPG gas cylinder (9kg) is not suitable or 2 kg cylinder is the right choice for these kind of portable camping gas stoves or I need to buy a regulator for this. Your help in this regard is much appreciated.
No answers
matthew t.asked
Im having an issue 1095D with the flame going internally into the burner and heating the inside of the burner, why would this keep happening? this happened the first time using the stove
2 answers
Sounds like not enough gas pressure. Have you opened up the gas valve (on the bottle) fully? And turned the stove knob halfway on (you should hear a hissing sound)?
I had the bottle valve open fully and a medium heat flame, it didn't happen straight away it was about 5 mins after using the stove, it then continued to happen after shutting it off and re igniting the burners
Geoffasked
Can the burners be dismantled for cleaning on Model 1103
No answers
Sueasked
I have the two burner gasmate but when pushing the ignitor to light it it won't light
2 answers
The ignitor is most likely faulty or the button itself is not clicking or making the required contact to exite the ignitor if th stove is under warranty return it.
Thank you..we bought it in another town so cannot return it.
Aurosscoasked
L have a 2 burner gasmate model 1095D what type of hose doses it take and type of gas bottle ???
Thanks Ross.
No answers
Bob D.asked
What hose fits this cooker?, the one I bought just does not screw on. Shop doesn’t know, they looked blank.
No answers
Bridget S.asked
can us use the with a regulator? is will it effect flow rate as i modified mini to fit larger gas bottles.. but flame is tiny and will not go very well?
1 answer
Bridget it’s not designed to work with a gas regulator. If you want to use a larger gas bottle, you just need the adaptor for the included hose (don’t use a regulator hose).
apezasked
I have a 1305 I have just started using the gas does not seem to go past the elbow joint up the hose. If I remove hose the elbow (right angle) connection has gas flowing. Just one travel up hose. There is a tag on hose saying comes with safety shut off valve. How can I fix?
1 answer
All fixed, took me a few goes. Pressure valve on stove connector needs a bit of a push in.
Tedasked
I have a 2 burner Gasmate stove that we use on the outside of our motorhome connected to an external gas bottle, can i use a GAS BAYONET HOSE TO SUIT WEBBER Q, 3 MTR BRAIDED 3/8 SAE and hook the Gasmate stove directly to the bayonet fitting on the motorhome?
The gasmate stove comes with a hose that has a different 3/8 fitting, a Schrader Valve. do i need that or can I just hook the Gasmate up to the external bayonet fitting with a standard 3/8 fitting on the Gasmate end?
Cheers
No answers
Peterasked
Where are the jets and how can I unblock them?
No answers
cornboyasked
Have a Gasmate 1095 in mint condition but no hose. Want to take it camping with our Caravan which already has 2 Gas Cylinders, Can I use these or regular "swap and go" Gas bottle and regular BBQ Hose?
2 answers
No the gasemate camping stove like most others uses a 3/8 size fitting you will need to get the hose for it and also the correct gas bottle that is the 3/8 in size.
Read somewhere that I could buy a 3/8 BSB LH adapter for regular 9kg gas bottles & buy a gasemate hose????
Dane Masked
Hi.. Might be a dumb question but on the gas mate 2 burner when i go to light the burner it does not light as all the gas is going out the 2 holes in the pipe.. what am i doing wrong?
2 answers
I would return it if there are holes in your pipe
There is someting wrong take it back to where you bought it from and exchange it
Other Outdoor Food & Drink Accessories
Other Outdoor Food & Drink Accessories
Chill Chest
4.2(285)AquaSteel iAqua
5.0(1)Camelbak Chute Mag
5.0(1)
Brand Manager for Gasmate?
Register now and take advantage of ieatwords's Brand Management Platform!
ieatwords.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ieatwords.com.au may earn commissions for products/services purchased via affiliate links.