??!

51 questions from our users

Shrutee D.

Shrutee D.asked

My motor is working but it will not when I put in products. Even things like spinach. Get caught in the spinner. Any ideas?



No answers
Matt T

Matt Tasked

Power button blinks 3 times and then goes off and doesnt work. Any ideas?

No answers
Paul R.

Paul R.asked

Hi, how many time can you use the NurtriBullet back to back. Does it need to rest and cool down in between uses.

I figure that whilst it's out I would make 4 drinks at times, meaning I would use it twice without a rest.



Is this ok. Thanks

4 answers
Johanna P.
Johanna P.

Yes definitely, using it 2-3 times consecutively is fine... It also depends on what you are blending and for how long. Normally when I make juice, I can use it 3 times in a row, but smoothies with ice will not be more than twice.

Andrew G.
Andrew G.

Hi Paul, I think for your intended use it would be absolutely fine. If you are giving it a 30 second rest or so between uses 2 times in a row shouldn't be a problem at all.

Kylie
Kylie

Hi Paul, i haven't used mine back to back. It leaks so often after one use, I worry it might be dangerous



Rowena S.

Rowena S.asked

I cannot remove my cup is stuck on the motor base, please help

No answers
Siva S.

Siva S.asked

I was making a smoothie today like everyday. it was working and when I tried to remove the cup it would'nt come out. Its stuck in the motor base.. So I had to switch off the power (switch). No smoothie today. Any advice please.

No answers
Lydia M.

Lydia M.asked

Hi, I purchased my nutribullet 2 months ago and it's not as efficient in blending as it first was. It take way longer so I have to keep putting it back on to blend. Is this normal? I just want it to be how it first was when I purchased it?

1 answer
Mummy C
Mummy C

Mine worked perfectly until the day it just snapped.

Marie D

Marie Dasked

Hi . I have used the blender 3times and it smells like a burnt battery. Is that normal?

1 answer
Betty
Betty

No you should probably claim that under insurance

Paula

Paulaasked

My nutri bullet is 3 years old it has stopped working.
Sometimes it starts then nothing ?
Thanks Paula

No answers
Jazmina T

Jazmina Tasked

Hi, in want to know if I can chopp seens of coffee with the milking blades?

No answers
Lge1330

Lge1330asked

Are the cups for blending in the original magic bullet compatible with the nutribullet 600 model? Also, are the base size the same for the two models? Reason for asking for help with the questions is that I have a original magic bullet and need to know if I can use the blending containers from it on a nutribullet model 600, if I buy one.
Thanks

No answers
Julie M

Julie Masked

how good does it crush ice cubes?

2 answers
jane9412
jane9412

I only put 2-3 ice cubes in per drink but I have never had a problem. I have never filled mine just with ice cubes so I cannot comment any further, sorry.
Cheers, Jane

TraceyT
TraceyT

Hi I make optifast shakes which require ice so I just pop a handful of ice cubes in 200-250ml of water then the shake and blend it. Tackles the ice well. If you’re wanting to chop etc maybe buy a small chopper ? Good luck!

Leslie P

Leslie Pasked

Just bought my nutribullet. I have plugged it in and tried to use it but it won't turn on. ? I have looked on the internet to see what it is that I am doing wrong. Still not sure what it is. I have played with tabs as many had mentioned they get sticky. It doesn't seem to be the issue. I know I have set it up properly. The only thing I can think of is that I need to push a reset button or maybe their is something with the motor? Any advice is greatly appreciated.

3 answers
Lea
Lea

Hi thanks for the question, the NutriBullet does not have restart button, however having worked in the electric gadget industry many years @go. Every so oftern a dud is let through from the factory. Australian consumers laws are in place for a reason, so the company must replace it for a new, working one. It is just bad luck, this company does make a nice product and lm sure that they will help you out.

Pranav
Pranav

I don't think it has a reset button but Have you tried pushing the cup in The blender and twisting which locks the cup and starts the motor inn secure way. Only pushing the cup works as well. Otherwise ask the shop to replace it for you as it is New and under warranty. Hope it helps.

Leslie P
Leslie P

K. Thanksgiving for the information. I will contact the company were I bought it from and ask for a replacement. I Cross my fingers that they can help.

Slib

Slibasked

I don't know how I managed to do it (except I probably should've had my glasses on), but I went to make a juice this morning and the Nutribullet 700 and it wouldn't turn or work. I turned it off at the wall and put my glasses on to notice that I have cross threaded it for want of a better word. In other words, it's on an angle with one of the little plastic "wings" sticking out and I can't budge it. Any advice please?

2 answers
ALY
ALY

oh no! my best advice is you find a big strong man to use those muscles to undo this troublesome mess!

Slib
Slib

Problem fixed. It just needed two people, one to hold the unit, and one to twist the top. Phew!

LoRo

LoRoasked

I am thinking of getting a Nutri-bullet. Where would you recommend buying one and is there anything I need to watch? Most comments are positive, but I am getting mixed messages as some say theirs break down.

4 answers
swampyro
swampyro

Hi, just be sure you buy one with 12 months warranty, and buy the 900 pro, just my opinion.
l bought mine from Ebay as at the time it was cheaper, and l got a warranty.
The 900 has a better motor, and you need to keep the unit clean, as sometimes you can get spills
from the contents.

RayCee
RayCee

We have only had ours for a month so the reliability is yet to be proven. We've had no problem with spills from the contents. We have only used soft items such as fruit and liquids and certainly won't be including ice or the like which would surely be harder on the machine. For us it only runs a few seconds at a time due to its speed.

Kyles
Kyles

I would recommend keeping a good lookout at all major stores as we bought our basic model 2 years ago & got a great price from Big W, especially with Christmas coming up they will sure to be on sale at various stores. Our nutri bullet has only just retired after 2 years of at least weekly use if not daily over summer & we also used ice & frozen fruits in our machine. You do need to shake in between pulses to not stress the machine & always haves small amount of liquid to help contents blend faster. Remember not to run machine constantly for more than 1 minute but you will read all that info if you purchase the machine.
Best value for money in my honest opinion. Good luck with your choice.

Donna M

Donna Masked

How do I unstick blade from cup on nutri bullet?

1 answer
Gabby
Gabby

What do you mean by that? did you closed it to tight and now its stuck?

Hank Junior

Hank Juniorasked

Does it do ice cubes?

1 answer
Lou B
Lou B

Yes, it does! :) Enjoy.

Mr A Morshedizadeh .

Mr A Morshedizadeh .asked

is the blade on the 600w same as the 900w?

3 answers
qestra
qestra

It's the motor that's different not the blade

Sierra
Sierra

900 comes with 2 extractor blades. 600 comes with 1 milling blade & 1 extractor blade. hope this helps!

Angela L
Angela L

As far as I'm aware the blades are the same !!

Rosie Ropiha Hemmingson

Rosie Ropiha Hemmingsonasked

I just want to know where I can get extra cups as son has left them at the work sites...? :(

1 answer
Pete
Pete

I have all the cups and accessories....it the motor that was destroyed

Fake

Fakeasked

Hello!
I just bought a nutribullet but now I think it's a fake one cause I realized I got it for a really cheap price. But I really need it and can't afford to pay for the real one. I read some articles where the real and fake where tested using the scenario that an ice or stone was lodged so I was thinking as long as I use my fake one with just soft fruits and foods will it explode?
Thank you

1 answer
Pete
Pete

I don't think it will explode. it not as if you will be walking away and leaving the machine on. I bought the real article and I am still extremely disappointed that after a few uses it simply stopped working. This dead unit and all the accessories now take pride of place as landfill at the local tip....where it will feel confortable with all the other garbage. I remember many years ago I bought a hammer for $3.00 I thought at the tiome it wouldn't last long....well it is still with me and has done a mountain of work since I bought it.....Go figure

Jooni

Jooniasked

How do you get the seal back in once you've taken it out to clean the gunk from underneath?

4 answers
Y.H
Y.H

https://www.youtube.com/watch?v=wRgNLD1ACyY

Frankie Chad
Frankie Chad

Hold your two index fingers down together on the same part of the seal and slide them apart to the left and right respectively, describing the full circle round to the 360 degree point when it will just pop into it's groove real easy. Make sure the seal and your fingers are wet. Works every time.

Frankie Chad
Frankie Chad

Hold your two index fingers down together on the same part of the seal and slide them apart to the left and right respectively, describing the full circle round to the 360 degree point when it will just pop into it's groove real easy. Make sure the seal and your fingers are wet. Works every time.

Page 1 of 3

Get an answer from our members

ieatwords.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ieatwords.com.au may earn commissions for products/services purchased via affiliate links.