Read also:
does the man shake really work zodiac cx20 robotic pool cleaner reviews ing direct orange everyday review aldi portable air conditioner review holden viva automatic transmission problems i-vac x10 handstick review beko wmy7046lb2 7kg front load washing machineSsangYong Rexton Y200 / Y220 (2003-2006) Questions & Answers
124 questions from our users
Markasked
I have a Ssangyong Rexton 2.7 xdi 2006. The auto transmission seems as if it cant decide what gear to go in. Sometimes when I stop I have no gears at all and have to turn the ignition off and on then I get gears but it lacks power.
Any ideas on the problem?
No answers
Laurance L.asked
Hello, I have a 2004 270XDI THE CAR HAS an erratic temp gauge when it will hear right up every now and then but car not hot
Anyway I've noticed I dont have any Parker lights on both sides front, not do I have tail lights on the passenger rear, all bulbs are good however 1 tail light bulb is missing,
What I do find strange is all the bulbs on the rear passenger will light up when the left indicator is on with the headlights and brake pedal, with all of the above on the left Indicator flashes fast like it is missing the rear bulb but is on solid with 1 other bulb on very dim and the rest working properly,
Anyone have any ideas on what may cause this, I find it very odd, could this have something to do with the temp gauge (read on a forum broken tail light can affect this also)
1 answer
First change the thermostat and temp sensor. This also allows the connections to be "fiddled with" cause this car has terrible connections! About the lights, again fiddle with connections first.
George Barryasked
I am having problems with my Diesel Rexton 2.7 when I turn left or right sharply there a loud clunking noise which seems to be from the the transfer box area. But other times it appears to be from the front of the vehicle. I have had the front of the diff removed to make sure everything is okay in there. The CV joints have been serviced and are okay. I have just had the transfer box fully serviced and the transmission. As soon as I take the front tail shaft there is no problem turning no clunking at all. So I am and so is my mechanic at loss as to where the problem lies. I am wondering if it could be a problem with computer because I have a spare to replace it.
No answers
As A.asked
Hi, My car remote working fine, when i press the key it beep once the with light one long beep but from car no response why?
No answers
Memz E.asked
Hi, I have a second hand SsangYong rexton 2005 diesel. I can't open the trunk window I'm thinking it needs regas but is there a button to open either from inside the car or ?appreciate any help thanks
No answers
Paulasked
Hi my Ssang Yong Rexton 2.7 diesal has a sound beep below the temperature indicator
No answers
dawn parkasked
what tool do you use too remove fuel filter diesel
ניר ד.asked
San young rexston 2005 engine 2700 turbo diesel problem at the beginning of travel I gives gas and car not respond
No answers
Lance M.asked
Hi there my 2003 musso 4H 4L button when selected light doesn't go on neither does it engage 4 wheel drive stays in 2H also rev counter doesn't work not power button for gearbox. Are they all related as to problem and what do I have to to fix
No answers
Marie W.asked
Where is the fuel pump lactated on my car it is a 2004 rexton manual
No answers
Jay Haconasked
Hi I have my Rexton and my talegate won’t open, any help?
No answers
Dilanasked
Hi, I have just experienced my Rexton YOM 06 2.7 xdi Automatic 5 forward, I have neutral the gear in traffic light then put in to D when the light is green, its went to D with shock and didn't change the gears at all, and 4WD check light came on, turn off the engine and it went off and seems now its back to normal, any help?...
No answers
Bimaasked
Can anyone help my 2004 Rexton having trouble starts fine but when I have reached my destination it will not restart for a couple of hours then it starts fine again
5 answers
Have you had the error codes checked ?
The problem is likely temperature associated as you have to wait until the engine cools before you can restart.
Does the engine turn over and not restart or not even turn over. ?
Is your vehicle diesel or petrol.
The engine does turn over and it’s diesel
I never had this problem before,,sounds like only way is an Overall Error check,, that should show something up,,xxxBob,,
Barneyasked
Good morning,
2005 Rexton 2.7xdi 88000miles
Dipped beam has stopped on both sides. Main beam and sidelights are fine as are front and rear fog lights. Assuming there is not a separate fuse for dipped beam (?, never heard of, but trust nothing & no one), what could it be please? I expect just simple bad luck or is there something I have not been able to find when researching? Great site and contributants by the way, a pleasure to read (interpret). Thank you all.
No answers
Sharlonasked
Hello
My Rexton RX290 2004 diesel has problem since I change the turbo, the car doesn’t accelerate well/ doesn’t have power. I push the gas all the way down in Drive and the car start running verry slow and the speed increases very slow. What may be the problem ?
milliemooasked
Is the central locking system in the Ssanyong 2010 Rexton 270 one that closes or locks it's self automatically??
If the car is left running and you close the door how long is it pre the car locking itself and then your cannot get back in !!!!!! Just fabulous when you are sitting on the side of the road for a spare key to arrive with out a phone as that was in the car ??
Lucky I stopped near a house as I was in the country and a phone call was made by them.
In advance, thanks for anyones help or thoughts or experience.
Fi Wood
1 answer
Hi. I was under the impression that car only locked itself once it had reached a certain speed. About 50 KMs per hour ...but I may be wrong. You may have a problem with your central locking. I have left my keys in the car overnight many times with the engine off of course and it did not lock itself...hope this helps. Rgds David
Raul Cosminasked
The high and low beam headlights on my Rexton 2005, xdi270, stopped working, any idea what has caused this? Fuse appears ok. High beam light not working on dash either. Only have parklights.
2 answers
Check the relay. Black box on the right hand side as you face the car. Sometime they stick because of moisture and other outside influence.
As Poeteer suggests. Check the relay which if fed from the fuse. If both have failed then it's a fault common to both lights and the only thing common is the relay or in the rare event the stalk switch ...rgds David
Dids Hasked
Hi, I have a 2006 Rexton 2.7 auto with what seems like permanent diff wind up. It is in a local non specialist garage but they cannot seem to pinpoint the fault, any ideas please?
3 answers
Well I have to ask how do you know it's permanent diff wind up ? Are you in low range ?
Have you checked the low range selector. This may be stuck in low range ..if so keep selecting high range . The low range solenoid can play up if not used for a long time....I always suggest using low range every month for a few MTRS at least. Rgds David
Check your tyre sizes
It is permanently in 4 wheel drive, I do not have a 2 wheel drive option, I have the correct tyre sizes. The workshop called today and apparently it was a 4 way cross joint, one of the needle bearings had perished and they ordered a new one. Thank you both for your time in answering,
Nytramasked
Can anyone help me. I have recently bought a 2005 Rexton 2.7 4wd automatic but do it know how the 4wd drive works.
If I put it into neutral and press the 4L switch, the switch clicks in and the 4wd Low light comes on and I can feel the car shift into what it’s k is 4wd low mode. This works fine I think, however I do not know how to switch in5o 4wd High because when I press the 4H switch all it does is release the 4L switch back out and th3 dash light for 4wd Low disappears but no 4wd Light comes on. I though5 it may get be the switch so replace this with a second had switch and the same thing happens. Is the switches for both 4H and 4 L supposed to work the same and stay in 2gen you press them because only the 4L does this? Thanks Martyn
Rickyasked
L have a rexton270 deisel won’t start turns over but emouslier light flashing will not go off. Any ideas?
ieatwords.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ieatwords.com.au may earn commissions for products/services purchased via affiliate links.