??!

28 questions from our users

Theo vb

Theo vbasked

Mustang MCA482 (2 Stroke, 160CC)

What year was victa mustang 160 2 stroke 2 blade electronic ignition made



No answers
elspeth

elspethasked

No answers
Peter S.

Peter S.asked

Mustang MMX485 (4 Stroke, 160CC)

what soark plug do i use for avicta mustang 4 stroke

1 answer
Vic
Vic

is yours the Honda Motor or Briggs & Stratton motor?

Peter S.

Peter S.asked

Mustang MMX485 (4 Stroke, 160CC)

what spark plug do i use



No answers
Peter S.

Peter S.asked

Mustang MMX485 (4 Stroke, 160CC)

what spark plug do i use

No answers
Mary

Maryasked

Mustang VMMX484 (4 Stroke, 190CC)

My mower won’t start Has enough petrol and oil but won’t start.can you help please

1 answer
Vic
Vic

check the spark plug, the spark plug lead. also check the throttle cable hasn't fallen off the carby.

Amber L.

Amber L.asked

Mustang

Hi I’m sorry for my ignorance but I’ve recently become in charge of the yard mantaince. I have a mustang 18 2 stroke mower with 2 blades. I need to replace the blades. Could anyone give any advise, please?
TIA



2 answers
Marina
Marina

sorry, mine is a 4 stroke with 4 blades

Vic
Vic

this is a great video how to replace the blades:
https://www.youtube.com/watch?v=FvMDiCF_qj0

Blackdog

Blackdogasked

Mustang MMX485 (4 Stroke, 160CC)

The catcher only fills to half way and then starts to spill grass out the sides. Just had it serviced and new blades fitted still not good.

1 answer
Neil B
Neil B

If the grass is slightly wet it will become clogged before filling the catcher

jus c.

jus c.asked

Mustang MCA482 (2 Stroke, 160CC)

I have this mower what blades fit it

1 answer
Neil B
Neil B

My mower is a Victa Razor with Honda motor. Have 4 blades available from your local Victa dealer.

Hutch

Hutchasked

Mustang MMX485 (4 Stroke, 160CC)

Hi I have a Victa Mustang model mmx 485 with the Honda engine and I am having difficulty with the throttle control, It does not respond to the hand throttle lever it either revs to high or slows and stops and when you finally slow it down a bit it runs roughly and eventually gasps to a halt. Any information would be great? thanks!

1 answer
Neil B
Neil B

Make sure the air cleaner is in excellent condion

Joe

Joeasked

Mustang MCA485 (4 Stroke, 160CC)

What grade oil shine used in a victa mustang? 4 stroke engine?

1 answer
Neil B
Neil B

Honda 4 stroke mower oil and clean air cleaner before use( Just tap it lightly and most grass will be removed)
Once a year change oil.( Just tip it over to remove oil) Airfilter, 4 blades from Victa Shop and spark plug. My Mustang with Honda Motor is now 17 years old and still goes like new

Flavio

Flavioasked

Mustang

How much would be the price?

1 answer

Depends where you purchase it but I paid $740.

Joe

Joeasked

Mustang

My victor mustang starts everytime but stops working after about 5 minutes, then I have restart it and then stops after 3 minutes, so on and so on,, What could the problem be?

1 answer
Carvaan
Carvaan

Hey it's either the petrol or air not getting mixed properly.
I would check the air filter first depending on how old is the unit and if you have changed the air filter and how long ago, try that if not then I would check the spark plug, again depending on how often you change it and when was the last time u did it, in most of the cases that would fix the problem if not then there might a problem in the fuel line.
Try changing the air filter and spark plug.

Keith

Keithasked

Mustang

victa mustang june 2011 12J902-0159-01-11061659 briggs & Stratton motor no model no to be found. starts no problem sharp knocking noise. blue smoke from exhaust. when finished mowing 50 minutes approx. oil runs out of air filter. next mow dull knock little smoke no oil leak .is it a bin job unit is in good condition

1 answer
Carvaan
Carvaan

Problem sounds like fuel line clogged or broken from somewhere. Best bet is to take it to dealer and haggle the price for full service.
As much as they charge an arm and a leg, some of them do a good job.

Joe

Joeasked

Mustang MCA485 (4 Stroke, 160CC)

What oil do I use for victa mustang 4 stroke Honda motor?

1 answer
Carvaan
Carvaan

Any sae oil 4 stroke ofcourse. Mineral oils are good for these machines, don't go for full or semi synthetic

Dale

Daleasked

Mustang

The mower is a Victa Mustang with Honda 4 stroke maybe 5 or 6 years old. Do I fill the oil to the top of the cross hatched area when the stick is screwed in or out?
Curious
Dale

2 answers
Frank Discussion
Frank Discussion

Fill to the top of the cross hatched area with the dip stick screwed in.

Dale
Dale

Greatly appreciated.

Thanks

Dale

Jim

Jimasked

Mustang MMX485 (4 Stroke, 160CC)

I'm deciding on either this or a Masport. What I would like to know is, does Victa fix the catcher problem or will I be stuck with it.

1 answer
LJW
LJW

The problem I had was the starter.
The mower supplier had to replace the starter mechanism and cable which apparently is a common fault in the new mower.
It took 2 service calls to get fixed.
As a mower it mows very well and the catcher compresses the grass well - meaning you do not have to empty the catcher as often as standard catchers.

Pete

Peteasked

Mustang MCA482 (2 Stroke, 160CC)

What is the weight of this mower?

2 answers
LJW
LJW

Heavier than most as it has a steel Victa Chassis.

Deano
Deano

33kg dry weight

http://www.bunnings.com.au/victa-19-160cc-mustang-alloy-mulch-or-catch-lawn-mower_p3380850

Bunkey

Bunkeyasked

Mustang MMX485 (4 Stroke, 160CC)

What fuel used?

1 answer
Trevor F
Trevor F

Hi, I have been using unleaded, 91 octane.

Morgan Billings

Morgan Billingsasked

Mustang MCA488 (4 Stroke, 160CC)

Does anyone know where I can get a close up view of the carburetor unit of a victa Mustang 4 stroke mowing machine?

1 answer
Trevor F
Trevor F

Could only suggest Victa website or All Mower Spares
https://www.allmowerspares.com.au/
I just tried googling "victa mower parts" and got a lot of potential places you might find what you need.
Hope this helps.

Page 1 of 2

Get an answer from our members and Victa representatives

ieatwords.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ieatwords.com.au may earn commissions for products/services purchased via affiliate links.