KahnIllawarra, NSW
- 4 reviews
- 1 like
Light switch doesn't hold down, to turn on the light, anymore.
We had this installed about 4 years ago. We had to replace the light bulbs about 2-3 times since. About 6 months ago, the light switch broke. The switch would stayed down (on) anymore when you press it. What is wrong with most white good manufacturers now days? They expect us to throw away appliances every few years. This is at best, a case of environment vandalism and should be outlawed by governments if manufacturers don't get their acts together. I expected a lot more quality control and social responsibility from Westinghouse!
Similar opinion? Write a review on ieatwords.com.au!
Annie2205Sydney, NSW
- 8 reviews
Westinghouse is very poor quality and will not last
At almost 6 years of age our range hood made a very loud cracking sound threw a spark and blew the light. We replaced the globe to no avail. Unfortunately our rather expensive Westinghouse gas oven blew the ignition box a few months before. We rang a gas plumber who said that Westinghouse is rubbish. I'm saddened that Westinghouse has really gone down in quality.
Similar opinion? Write a review on ieatwords.com.au!
ShaneNew South Wales
Terrible product...seems to have a common fault
We have had our westinghouse wrj900us rangehood for 2 years and 2 weeks. 3 nights ago it made a loud cracking sound and shot out a spark. It also blew power to our whole house. We bought new bulbs as they both blew but now lights wont work at all. Had a burnt out socket as well. After looking at reviews it seems i am not the only one to be duped into a faulty product. After contacting westinghouse we have been advised that they will cover the repair but we have to pay the technicians travel of $135 travel expense to travel less the 50kms to fix the faulty rangehood. Just checking prices and reviews now to see if it is worth fixing it going for a different brand. Do not but this unit and be caught out like myself and many others.
1 comment
Similar opinion? Write a review on ieatwords.com.au!
Find out how Westinghouse WRJ900US / WRJ900UW compares to other Range Hoods
Know better, choose better.
MarkVictoria
- 2 reviews
Put me off this brand.
I'm an electrician and was called out to a clients house to look at their range hood. It made a big cracking noise and flashed and the lights stopped working. I found the circuit board to have blown. The fan however still works. This seems to be a common problem and when I tried to purchase the circuit board, was told I had to purchase the entire assembly worth $150. A new range hood I can purchase for $250. Unhappy customer. Unhappy sparky. No lights. 0416106624
Similar opinion? Write a review on ieatwords.com.au!
Disappointed
This was a replacement for a still functional Simpson (Westinghouse brand), upgraded to match other stainless appliances. Went with Westinghouse again for its trusted name.
10 months out of 2 year warranty the light made a huge cracking sound when we tried to turn it on. Light stopped working. Replaced both bulbs, still not working. Noisy fan still operates though. Reading similar reviews on the net of this and related models maybe suggests this is an inherent switch/circuit problem???
Called Westinghouse Support, they first asked if I had th...Read more
1 comment
ELECTROLUX ..Westinghouse
Hi GBB,
Narelle from Electrolux here.
We would love the opportunity to discuss the concerns you have raised. Can you please email me your contact details at [email protected] attention Narelle ?... Read more
Similar opinion? Write a review on ieatwords.com.au!
- WRJ900US
- Verified purchase
2nd Unit Blown Circuit
We have had 2 of these units and both have blown the circuit board. The latest one was purchased 12/8/13
Just over 2 years and obviously out of warranty. We don't use every time hotplate is on as is noisy so sometimes
just use for the light. But blew when turned on last time.
Last time we will buy Westinghouse, the quality not like it used to be.
2 comments
ELECTROLUX ..Westinghouse
Hi Sue,
Narelle from Electrolux here.
We would love the opportunity to discuss the concerns you have raised. Can you please email me your contact details at [email protected] attention Narelle?... Read more
Narelle from Electrolux has been brilliant and paying for parts to be fixed.
Similar opinion? Write a review on ieatwords.com.au!
TheCookSYDNEY
- 5 reviews
- 6 likes
Good performer
My range hood is white. A pretty good fixed unit. Easy to clean. Had it installed with the flute going through the ceiling and out of the roof. Filters simple to clean and take off and on. It is a bit noisy but what range hood is not. The motor would have to be in the roof for it to be quiet.
Did I say easy to clean? The filters are but not the fan blades and housing. One must remove the screws but one screw is located at the back. You have to own a right-angled screw driver to remove that one.
The little symbols above the push buttons rub off easily.
Similar opinion? Write a review on ieatwords.com.au!
SadaGreater Melbourne (Metropolitan), VIC
- 675 reviews
- 112 likes
Good
This is an inexpensive range hood which does what its supposed to do. Ours is stainless steel and it cleans easily with a spray and wipe (gentle one). Overall, a good product for the home kitchen.
We bought this one because our old rangehood kept leaking oil thru the filter (we had no idea you had to clean the filters!).
Its a bit noisy even on the lowest speed setting, which is 1, and there are 3 levels. Its a bit tricky to install, I mean, you can do it yourself and save money, because you basically just put it in the place and screw it on. T...Read more
Similar opinion? Write a review on ieatwords.com.au!
Questions & Answers
Debbieasked
How do you remove Rangehood filters so I may remove the 2 as I wish to replace them?
[email protected]
Have you a info sheet there was nothing left here information wise when we purchased our home?
1 answer
I'm assuming you are talking about the Recirculating accessory – Optional carbon filter ARCFD for recirculating mode only.
A diagram shows rotating it first to pull out or push on and turn to secure. No printed instructions.
SteveDasked
Is this available in stainless steel finish with a stronger fan motor? My new induction cook top creates more steam & smoke which this fixed range struggles to clear. Mine has a top flute and vents outside top of roof.
3 answers
Hi Steve,
I don't know if they have a stainless steel model.
The Westinghouse has 3 fan speeds and I find that very adequate. I hardly use the top fan speed.
I use the the fan speed setting on 3 and it cannot clear the smoke or steam adequately with the one motor unit airflow rated at 200 cubic meteres per hour. I believe the WRJ911US has two motors and doubles this to 400 cubic m/h and is this available in a staineless steel finish?
Yes, I have the WRJ611US, the smaller width in stainless steel, but it is unbelievably noisy. I will replace it soon. Even on low speed it makes a racket.
Murphyasked
Regarding electrical installation does the unit come with electric flex already wired up and with a 3 point plug attached to plug into 3 point socket and what is the length of the electrical flex?
1 answer
This unit is ready to plug into a power point with a cord length of about 1.1 metres. All you have to decide is whether to have the exhaust vented outside or not.
ieatwords.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ieatwords.com.au may earn commissions for products/services purchased via affiliate links.
ELECTROLUX ..Westinghouse
Hi Shane,
If you wish to discuss this further please feel free to contact me at [email protected] attention Tania Thanks, TaniaTania from Electrolux here.
We would appreciate the opportunity to discuss the concerns you have raised about the Westinghouse rangehood. ... Read more