??!

41 questions from our users

Helen T.

Helen T.asked

How to reset my electrolux dryer if I press the start button it's show err?



No answers
Hayley

Hayleyasked

I’m having trouble with my Tumble Dryer, EDP2074PDW. We have had this machine since November 2016.
I have cleaned all the condenser and drum including the water pump compartment at the back.. Still it will turn off after 3 minutes and the water container light flashes.
We have it directly plumbed into our waste, which I have also checked and flushed with Draino, just in case. The water container is bone dry. Any other options I can try?.. Very frustrating an washing is piling up.. Thanks Hayley

1 answer
Hayley
Hayley

Correction.. Condenser Dryer..

Toni

Toniasked

Hi just wondering if this can be installed side by side? Does it come with brackets or do we order them from you ? Thanks.

No answers
Edith77

Edith77asked

My Electrolux EDP2074PDW condenser dryer is no more working because the childlock is ON and no more possible to unlock.
The Start Led is flickering all time.
All buttons are working (a press on each provides a ¨click¨ meaning the good working).
When pushing both button (Start and buzzer) simultaneously to unlock, childlock Led flashes three times and remains on.
I am lost and do not know how to fix this problem. It is probably very simple, but diagnose is not explained anywhere. Many thanks, Edith.



No answers
Richard

Richardasked

The cooling phase icon is permanently showing when in operation regardless of mode, is this supposed to happen? After 3 hours contents are still damp and I have cleaned the filters and emptied the water draw and set remaining moisture level to maximum dry. Please assist, thanks.

No answers
David Chan

David Chanasked

I cannot open the condenser dryer door, the door latch inside didn’t return to normal position after I closed the door. How can I fix it? Thank you.

1 answer
Sir A
Sir A

Contact Electrolux directly

kumar

kumarasked

Hi, having problem with dryer EDP 2074PDW, set programme, press start, dryer running after 3 minute, it stop



2 answers
Sir A
Sir A

Needs to have more weight of clothes in to detect

Sir A
Sir A

Needs to have more weight of clothes in to detect their is a load

Kath

Kathasked

Do you know of this dryer can be wall mounted? I’ve tried to search for a compatible wall mount but have had no success?

1 answer
Sir A
Sir A

We didn't wall mount it. I did see it has an option to though. https://spares.bigwarehouse.com.au/product_info.php?products_id=1681754

Leanne

Leanneasked

My condenser dryer is showing ‘Err’ when I try to start it. I have emptied the water tray. I have had it for over 2 years and it has never happened before. Any ideas?

No answers
Sophie H

Sophie Hasked

My dryer is continually showing the error code EHO, please assist?

1 answer
Sir A
Sir A

Possibly a wiring issue

Robyn Savage

Robyn Savageasked

My edp2074pdw has drum turning and is not heating and showing error 50. What do we do to fix it?
Robyn savage

No answers
Ron Anderson

Ron Andersonasked

My Electrolux 7 Kg Advance Drying System Intuitive is getting very hot inside whilst going through the drying process without it drying towels fully after running for 1hr35 min " cupboard dry "
Comments / suggestions please ??

No answers
Shaun C

Shaun Casked

My Electrolux EDP2074PDW condenser dryer is just out of warranty and has stopped working. After 5 minutes the dryer cuts out and the display goes blank, I can turn it to another setting and it will do the same thing after 5mins, if I put it on the refresh setting it will go through the whole 35min cycle without cutting out. Any ideas?? Many many thanks.

2 answers
Electrolux
ELECTROLUX ..Electrolux

Hi Shaun C,
Linda from Electrolux here.
We are sorry to hear you are experiencing problems with your dryer.
If you wish to discuss this further please feel free to contact me at [email protected] attention Linda
Thanks,

Mydryer
Mydryer

Has this been resolved? I am having this problem too!

mat_acl8602

mat_acl8602asked

Hello sir why my dryer at panel write code EHO

3 answers
Sophie H
Sophie H

Did you find an answer? I have the same problem

איתן מ.
איתן מ.

Hi! I have the same problem of the eho. I checked the wire and it is ok. What can I do else?

Lisa and Shay
Lisa and Shay

I also need this and see I have same problem

Faye

Fayeasked

Love this dryer and have purchased another for our beach house .the older one at our home has been running well until today when turning on is showing EHO in the digital plate and beeping?
Anyone know what this means? Not sure if I can fix this or need a serviceman

2 answers
Raepete
Raepete

Hi Faye my name is Raegan & I’m the one who purchased the dryer & reviewed it on this site. I must say that I have not seen this error message on my dryer so I would advise you to go straight back to where you purchased it from and see if they can help as your warranty will cover this if it’s under a year old or if you’re like me you would have taken the extended 5yr one and the machine will be replaced. Electrolux are a good quality company & I am sure that if you call them they will help you. I hope all goes well

Sophie H
Sophie H

Did you find an answer? I have the same issue.

Bahareh

Baharehasked

hi,
please email me how I can install this machine correctly?
the clothes get hot in there and not dry at all!
I was thinking if any thing is wrong with my assembly .
[email removed]

1 answer
Muzz
Muzz

Hi Bahareh,
A condenser Dryer works differently to a Tumble Dryer,
Think of it as a vacuum cleaner sucking out the moisture from your clothes with hot air.
When you remove your clothes from the Dryer they will feel hot and damp when they cool down and reach room temperature they will feel dry.

heather

heatherasked

hi I have a Electrolux 7kg advance dying system edp2074pdw the dyer setting system works fine but the machine when your press start the dryer just hums I have only had the dryer 3 years and after 6months I had to put a new motor in the warranty has just ran out could some help me with this problem please?

1 answer
Gazza
Gazza

Electrolux Have updraded us to the new Electrolux 8kg Condenser Dryer (EDC2086GDW)
I would say that you would need to call some one to come fix. Or even buy a new one. You could have got the one with the gremlin in it.

Kim

Kimasked

Hi I just finished my last payment on my Electrolux intuitive condenser dryer 7kg last week its 2 years old and tonight it had a E60 error is this the door or heater there seems to be and issue with find out what applies to this model and as it's paid off by 6days it's out of warrant so is it to expensive to fix or am I better getting another machine?
Kim

2 answers
Steprenf
Steprenf

Hi Kim...I'd approach Electrolux first, as having an expensive machine like this conk out after only two and a bit years is really crook. Yours might be a more minor problem but even if it isn't they may be willing to help. this is the advice given to me by a technician, on the basis that they're trying to repair their poor reputation earned from these machines being unreliable.

Kim
Kim

Steprenf thanks I rang electrician and Electrolux is going to fix under the warranty as it was so close they fix up 1 month out of warranty and it's a common fault with the machine it's the heating element

S M

S Masked

I have just bought this machine. I put one washed sheet in it and after 5 hours on cupboard dry setting it is still as wet as it was when I put it in. Can you help me? I am nervous because everyone is saying the same thing.

2 answers
Liz
Liz

Hi i use the extra dry setting for my load and that drys my sheets and towels fine i dont put single items in i only use it for a load to dry

Electrolux
ELECTROLUX ..Electrolux

Hi S M,
Leslie from Electrolux here.
We are sorry to hear you are experiencing problems with your Electrolux EDP2074PDW.
If you wish to discuss this further please feel free to contact me at [email protected] attention Leslie
Thanks
Leslie

JCdryer

JCdryerasked

Hi, I bought a new 7 kg condenser dryer in August 2012 and I recently put one towel and a bath mat in it to dry, turned it on and it started and then stopped. The towel was warm (but of course still wet). I turned it off at the wall socket as it is plugged directly into the wall socket and turned it on again and it does nothing - no lights turn on.
What could be wrong? What do I do?

1 answer
Liz
Liz

Hi i would check the fuse board or plug another electrical appliance into the socket to see if it works if it does i would then contact Electorlux and ask them for some help sorry i couldnt help much Liz

Page 1 of 3

Get an answer from our members and Electrolux representatives

ieatwords.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ieatwords.com.au may earn commissions for products/services purchased via affiliate links.