Is there a booklet available explaining usage Gail
I would appreciate a copy of the booklet sent to me my name is Gail Barker my address is 7 Majors Road Eaglehawk 3556 Vic thank you
Hi Gail, thank you for your question. I will send you a copy via direct message. Thanks
i have an es7, all the lights are flashing and there is this constant beep and it wont stop, i have tried the top left button method but it doesn't do anything, i have also tried pressing any buttons to stop the beep, but to no avail. how to stop/ reset the beeps and flashing?
Hi Gilbert, Thank you for reaching out to Euromaid, Please contact our customer care team on 1800 444 357 with the model number of your appliance and they will be able to assist you further. Alternati...
Read morevely you can email us at [email protected]I have a Euromaid EW7 and l cant set the clock as the function does not show the clock when l press (11) adjustment key on the control panel.
Pleas help as l would like to reset the time.
Hi, Thank you for reaching out to Euromaid, Please contact our customer care team on 1800 444 357 with the model number of your appliance and they will be able to assist you further. Alternatively you...
Read more can email us at [email protected]Is the door on this model triple glazed
Hi Amanda,Thank you for reaching out to Euromaid. Please contact our customer care team on 1800 444 357 with the model number of your oven and they will be able to assist you further. Alternatively yo...
Read moreu can email us at [email protected]how do i set the clock
how do i set the clock
how to set the clock
Hi John,
Please give us a call to walk you through it over the phone :)
Have an ES7 oven and overnight the display began to flash continuously and it is also beeping constantly - how to reset please?!
G'day Rob,
Here is the procedure, any issues please call us on 1800 444 357. ...
Read more Selecting the top left hand button on the timer (function button) until the clock symbol is displayed in the LED screen Then select the plus /minus buttons on the right hand side of timer to adjust to the current time Once the current is set, release wait a few seconds then clock should be set. If the alarm is still sounding this can be cancelled by pressing any button Thanks!I bought an Euromaid ES7 Oven in September 2015. It is provided a two years warranty.
However on the third year after the warranty expired, it broke down.
Only the digital clock still displays, the oven & fan do not work.
Do you know if there is a fuse that can be replaced?
Hey Sam,
We would like to assist you in getting this resolved. Can you please call us on 1800 444 357 and quote 'Dale67'. The team will process this for you. ...
Read more Thanks and happy Friday!The only thing i can think or imagine it could be is either the thermal cutout or function switch is faulty.... To replace these switched is relatively cheap as a cost of around $30.00 up to $ 40.00 e...
Read moreach. I hope this helpful for you. Regards BekstaThe fan force operation does not allow built up smoke and steam in oven to escape ??
Is this correct or is their meant to be a flue attatched ??
Hi, we are not 100% certain we understand your question. Can you please get in touch with us on 1800 444 357 so that we can assist you further? Thanks.
Yes that's correct as is with all other ovens during cooking. Smoke obviously means something burning from food and steam from moisture... Oven too hot or need to cover delicate area's with foil..... ...
Read more It has a cavity fan with aides in keeping oven exterior cooler.. Hope this is helpful....Happy with my CS90S. I bought it to replace an older model of the same size so I didnt have to refit the kitchen. On the older one the electrics fried. On this new one the oven fan goes for a long time after oven is off. Is this to stop the electrics frying? I am sensitive to noise and would like to stop it doing this as I am in an open plan situation. However, I do not want to just turn it off if it will damage my stove. Thanks, Mhairi
The fan running after the oven is finished cooking or turned off is a standard feature of fan forced ovens and is not unique to Euromaid ovens. I think it is a safety feature. Our Whirlpool oven and m...
Read moreicrowave do the same thing. If I were you, just leave the fan do its work as it is designed that way. This is just my opinion, turning the fan off straight away after cooking might void your warranty due improper operation of the appliance.It's just the cooling fan going through it's process. There is no worries or problems after a few minutes it is all over.
Yep, this is a feature designed to prolong the life of your appliance!
I’ve had the ES7 model now for 2 years 10 months and it has stopped working. The oven clock is working, but not the light, fan or oven.
Any ideas?
Thank you
I have no idea, I am not an electrician and I do not work for the company. I suggest to contact an electrician, describe your problem and ask for a quote so you can decide if it is worth fixing or buy...
Read moreing a new one. Also ask the company direct for advice, it is an Australian company so you can find the contact number or email by searching the internet.Hey Christine,
Sorry this has happened. ...
Read more Can you please send us a direct message with your full contact information?Thank you for your responses.
I have sent an email direct to Euromaid, and am waiting for a response from them.
Get an answer from our members and Euromaid representatives
Other Ovens
Extra Information
Other Ovens
ieatwords.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ieatwords.com.au may earn commissions for products/services purchased via affiliate links.