Read also:
sunbeam torino coffee machine review kmart bagless vacuum cleaner review rover raider ride on mower reviews harris farm glendale opening hours bauhn 55 inch tv aldi
Masport Crossjet 4WD
DanPerth, WA
- 3 reviews
OK machine terrible parts service
If any transmission parts are required it is usually 6-8 weeks wait time (Western Australia) would think they would stock these parts within Australia considering the price of machine. Dont buy this machine if you need something you can rely on! I have multiple issues with a customers machine, for example the input shaft to the transmission snapped after around the 100 hours mark. (still within warranty period) Due to transmission being Tuff Torque and the mower being Masport both manufacturer's kept arguing with us saying it was the other man...Read more
ufacturers problem, In the end we did not get warranty and had to wear the repair costs. Very disappointed with this machine as I am a fan of alot of masports products. Huge let down on the machine and after sale service.
Similar opinion? Write a review on ieatwords.com.au!
GavinOakleigh, Whangarei.
Good machine, but not as good as videos
I bought this machine on the strength of the videos, I did not test drive on my property, but sadly I have found in my opinion it needs more horse power. On my property, in New Zealand it struggles with long grass, on the highest cut, and has stalled on a number of occasions.
The climbing ability is good but tends to struggle when both climbing and cutting, hence needs more HP
I am 5ft 8, so not that tall but find the seating uncomfortable along with the forward/reverse lever which seems too short and makes your arm ache after a while. I wou...Read more
1 comment
Similar opinion? Write a review on ieatwords.com.au!
Other Ride-On Mowers
Shayn H TasmaniaNorth-West & West coast, TAS
- Crossjet 4WD
- Verified purchase
A very impressive machine
I have had my crossjet 4x4 slasher for over a year. I hire myself and it out for work. I have pushed over 40mm diameter saplings and mulched them. I have pictures. I have driven into 2 meter tall blackberry thickets and mulched them. The machine has handled almost everything I have thrown it at. It shatters rocks as big as two fists.
I have worked it at 45 degree angles. It is incredibility stable. As I am only hired for difficult jobs, depending on the height & thickness of the vegetation, I can cut an acre / hour or hectare per two hours.I h...Read more
Similar opinion? Write a review on ieatwords.com.au!
Find out how Masport Crossjet 4WD compares to other Ride-On Mowers
Know better, choose better.
DrewCasuarina
- 2 reviews
Not bad at all
Personally i,d like a bit more Horse Power but thats just me i like lots of horses better too many than not enough. I am sure if i tried hard enough i could bend it, break it, bog it cause every machine has limitations get to know what they are and this machine will do most things for you, better than some not as good as others but compare price to what it,ll do. Overall thus far i am happy with machine
Sloping overgrown suburban blocks with very tall grass No probs.
just a personal thing but power steer would be nice :-)
Similar opinion? Write a review on ieatwords.com.au!
makkgeorgica
amazing machine
i've had my 4x4 crossjet for 18months and have done 190 hours of what i would consider extremely tough and rugged work. 20 degrees............pfffff, i know it says 20 in the handbook robbo, but i've regularly used mine on up to 40 degrees(yes checked with an inclinometer) and in reverse! in the time i have used it i have had one of the plastic knuckles on the rops break because i hit a tree with the bar, and one of the steering linkage arms broke because my 25 yo son was being too lairy on it! we bent a bit of threaded rod to the same shape, p...Read more
ut it in and off we went again. i have used mine to knock down lantana that is 4mtrs high and just as round, with stems up to 40 mm. sometimes it doesnt have the grunt to push through because of the density of the lantana, but usually it actually drags the plant out, roots and all. I have made a cage so i dont get scratched.. the forward reverse lever was too short but that was a simple fix to extend it. i'm only 5'7 and i could see that anyone that was abnormally tall would be cramped behind the wheel. when i bought it, it was raining and the paddock hadnt been slashed for two years. so the crofton weed and setaria were at least 4feet high and very dense. i could not believe the way this machine just cut a swaith through it like it was a neatly manicured lawn! dead set!!!! The issue of rocks..............i have all manner of rocks,(living at the base of a cliff) from small 6inch ones to massive boulders 4feet in diameter. in my experience, the larger ones stop the machine before it hits the blades, and so i go around them, the smaller ones it either hits and keeps going or smashes them up. i have had the misfortune to have driven over one and ended up suspended on it, in which case ive had to winch myself off said rock. (yes i fitted a winch to the rear bumper for such occasions) and also the times when im slashing new areas, cant see ahead and the ground drops away, or the front wheels disappear down a hole. i have noticed white smoke coming out of the engine occasionally, but this was when i had left it parked on a slope of more than 25degrees and i think the oil can get into the top of the engine under this circumstance. after about 60 seconds of running it disappears though. If the oil dipstick isnt screwed down tight it may allow air into the system somehow and cause this smoke. i had that experience with another bs engine on another machine, not this one. tyres going flat......................get yourself some stuff called liquid patch puncture sealant. its green gel stuff that you put in your tyres and if they get a puncturs it seeps through the hole and stops the leak, as you drive along. i was regularly getting punctures from cockspur bushes until i used this stuff. it comes from super cheap auto. i could keep going on and on, i think this is just the best machine around for steep rough terrain. TOUGH AND DEPENDABLE! i dont doubt your experience robbo but i thin unfortunately u did in fact get a lemon. TOUGH,DEPENDABLE, STABLE um...........it doesnt have airconditioning, or a stubbie holder1 comment
Hi Makk
I'm glad you're so happy with your machine. I suspect that if you've had good experiences, you'll write nice things and vice versa.... Read more
It does sound like you've made a few modifications to suit yourself which is commendable although wouldn't it be nice if these were included as part of the machine when it was manufactured or available as factory fitted options even at a small extra price? Surely they could include a stubbie holder as standard equipment especially if they're selling it in Australia. I wish mine worked even half as well as yours but I've had thick grass about a foot high stop mine dead in its tracks. Thanks for the tip about the liquid patch puncture sealant - I'll certainly give it a try. And yes - it does seem I did get the one built by the last shift on a Friday afternoon before a long weekend after the crew had been out for a liquid lunch. I agree with you about the slope capabilities although I'm also aware that by exceeding the manufacturers limitations in the handbook if anything breaks it won't be covered by the warranty as the equipment has been used outside of their recommended limitations. Unfortunately I've needed to use my warranty quite a bit much to the annoyance of the company that sold it to me. Yes - the limitations in the handbook are probably there for the same reason they have to put "do not use in the bath\shower" on hair dryers. If they don't and someone is injured they'd be open to legal action because they didn't say that it couldn't operate on vertical slopes. In other words they've built in a safety margin for the intellectually different. I've certainly had mine on a slope in sandy soil where it needed to be towed out with a tractor because it just couldn't make it up the slope. Still; everyone has different experiences based on their individual properties. This particular machine was probably, in hindsight, not well suited to the task I had envisaged and I was probably a bit naïve to believe the salesman when he said that it would be fine for mine intended purpose. Ah well - you live and learn and I'm sure I'll be having many spirited discussions with the company that sold it to me right up to the point when the warranty runs out after which I suspect that I'll never hear from them again assuming that they don't go out of business before then. P.S. - I know you said you were 5'7" but I'm not sure those taller could be classified as "abnormally tall" unless you mean professional basket baller kind of tall. I think when you start to get above about 5' 10" you start to need to curl up into a foetal position to fit. To clear my few acres working about 6 or 7 hours per day takes about three days (allowing for the avoidance of obstructions) and the limitations of my machine and that's a long time to sit cramped up on a mower. Maybe the last shift on Friday also made mine shorter than others - I wouldn't be surprised! Thanks for your advice with this machine. I'll certainly give it a go. Cheers.Similar opinion? Write a review on ieatwords.com.au!
LandownerCoffs Harbour
A Robust and Capable Machine
I bought a Crossjet 4WD in Dec 2012 so I could maintain the area of my bush block that surrounds my house. All this land is sloping, some steeply. It’s about 5 acres in size (though I'm extending it into the surrounding bushland as I find what the Crossjet is capable of). I researched the available options and chose the Crossjet on the advice of two mechanics with hands-on experience with these types of mowers.
My machine has now done 60hrs and I'm very satisfied with its performance. It’s extremely stable on steep slopes and has plenty of ...Read more
power to cut through long grass. It’s done an excellent job of slashing steep and rugged areas I’d never been able to maintain before. Its highest cut setting is high for a mower so I’m able to slash rough terrain whilst avoiding stones and branches protruding up to about 100mm. The slasher housing, cutting arm and blades are all robustly constructed and cope with the rough stuff typical of a seriously overgrown bush block. It’s also good for maintaining the established lawn areas I have, though it doesn't cut close if you’re after that manicured lawn look (I'm not). Although at 60 hours it’s far too early to assess long term reliability, so far I've had no problems. I have an engineering background so I examined its construction carefully before I bought it. The machine is well designed and uses proven drive train components such as a Briggs & Stratton Vanguard 23HP engine and Tuff Torq K664 hydrostatic transaxle. Capability, Excellent stability on steep slopes Seating position could be improved to allow more space to swing knee in front of steering wheel when mounting1 comment
Agree with your review. Good machine. The seating is close, but I managed to modify the stop position to get another 50 mm that makes a big difference in terms of knee room.
Similar opinion? Write a review on ieatwords.com.au!
Questions & Answers
Dallas S.asked
Price and width of mower cutting deck
No answers
Lissaasked
Hi we have brought a 4wf crossjet which is not going again fir the third time since we Broughty it a couple of months ago. Carburettor replaced, faulty sensor for clutch now they think faulty clutch. There is an error code on dash 8115 just wondered what thus refers to. 4 weeks lockdown and a brand new broken down crossjet not much fun.
1 answer
I'm not sure what that code would be for. The only thing I can suggest is try google, somebody else may have had the same, but I guess you have already tried that. Sorry I can't help further............Good luck.
Rayasked
Hello All - I’m trying to find a unit that will work on a sand island In QLD Australia I have a 1 acre block that is a bit sloping but some areas are open sand - then a lot of not thick thistle- I am sure it will handle the Bush - but does anybody have experience with it transversing sand? Also can you Disengage the blades when driving? Cheers Ray
1 answer
Yes the blades can be disengaged when driving and should be able to handle driving on sand being 4wd. I would recommend you get the dealer to bring it out to your place for a trial to see what it can and can't do. Personally I wish I had done this before I bought it because if I had I wouldn't have bought it. Unlike the videos mine does struggle on long grass, is uncomfortable after a period in the seat and knows how to use fuel when working hard. There are other options to consider like the sherpa or the Grillo so take your time and buy wisely.
Other Ride-On Mowers
Razorback All Terrain
4.5(32)AS-Motor AS 940 Sherpa 4WD
4.9(15)Rover Mini Rider
4.1(22)Cub Cadet RZT S Series
4.3(10)Kubota Z200 Series
4.1(10)Masport A4200
5.0(1)Hustler Raptor
4.7(9)Jonsered YT Series
3.8(4)ieatwords.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ieatwords.com.au may earn commissions for products/services purchased via affiliate links.
Gavin
Since buying this machine new I have found out that the cutting deck fitted is not the one off the cross-jet, it is the one off the Goliath ( spelling ) which is the next mower up in the range which h... Read more
as a bigger HP, perhaps this is the reason my mower struggles with the grass on my property because of the cutting deck was designed to be on a higher HP model and there for has issues.