Read also:
difference between s26 gold and s26 original ryobi 175cc subaru 4 stroke lawn mower elna 40 sewing machine review bosch highflow 26e pilot light ozito blower vac replacement bags rewards come true check balance allans billy hyde blackburn vicOnga Hammerhead (page 3 of 7)
Best Cleaner I've had
I've had 3 cleaners .This is the best by far, I have had the onga hammerhead for nearly 3 years without a problem It was easy to install its easy to use. It's the least complicated cleaner I've had and does a great job cleaning bottom and walls of pool. Highly Recommend if you want an easy no fuss cleaner.
Similar opinion? Write a review on ieatwords.com.au!
NhojSAU
- 3 reviews
- Verified purchase
2nd Hammerhead Same Result Good
Moved house and left the old one behind. New house, purchased another Onga Hammerhead.same result as before, simple, trouble free and just cleans the pool without getting stuck.Initially it wanted to stay at one end of the pool. Ignored manufacturers instructions and added another length of hose.perfect. Just gets around and does its job.Also less working parts means less maintenance. this is the pool cleaner for me, wont consider anything else
Similar opinion? Write a review on ieatwords.com.au!
PluggerAdelaide
Very disappointing
Had researched robotic cleaners but being married to a Scot, I got talked into one of these. Very disappointing. Gets stuck in corners. Gets stuck on the steps. Leaves dirt behind. Have tried different pressures but still not good. While it is better than the cheap models from large hardware stores it hasn't lived up to expectations. Will now look at robotic cleaners again.
Similar opinion? Write a review on ieatwords.com.au!
Find out how Onga Hammerhead compares to other Suction Pool Cleaners
Know better, choose better.
AGRO!Richmond-Tweed, NSW
- 11 reviews
- 10 likes
Not good..
In the beginning this pool cleaner was great but after only one season it now gets stuck in the corners of our pool all the time.
I have tried every thing to try and get it to work how it used to but nothing seems to work I even tried running the pump with more pressure but it still gets stuck.
Anyhow we ended up buying a zodiac mx6! Now this is a great little pool cleaner :)
Similar opinion? Write a review on ieatwords.com.au!
HCBMid North Coast, NSW
- 3 reviews
Great product
Gone are the frustrations caused by the endless issues generated by my previous cleaner. The Onga is easy to set up, and simply works ! Two previous cleaners would get stuck in one corner of the pool, this has not been a problem. Simple but effective design which means less to go wrong. The parts are well made and feel to be a higher quality plastic than others I looked at. Quiet as well. I've had it for only a month now, but am happy to give it top marks even at this early stage.
3 comments
Now 12 months of use. The only issue has been the very occasional obstruction of the single moving part by leaf matter. It is pretty rare, and all things considered not a problem. No signs of signifi... Read more
cant wear etc, and it still cleans quite to my satisfaction. This is simply so much superior in every respect to other cleaners which, I am sure, were sent to drive me distraction.So 4 years later. The past 6 months or so showed a steady decline in performance. I replaced some parts, no improvement. Finally I worked out that it kept stopping due to wear in the flapper piece whi... Read more
ch allowed even very small bits to jam it up, the body was also a bit suspect as the cleaner no longer remained flat. I decided to replace the entire thing with a new one. Should have made that decision earlier. The new one is busily gobbling up dirt and leaves without issue. I’m happier again. In general I think that it lasted fairly well considering that it was never taken out of the pool, and worked 6 hours a day every day of the year. It’s a harsh environment for any material. I continue to strongly recommend this cleaner.Similar opinion? Write a review on ieatwords.com.au!
steerage250Perth
- 5 reviews
- 1 like
An excellent pool cleaner
I had a Kreepy for 20 years. It took 10 years of tinkering to get it to be reasonably reliable (ie not getting stuck), and then really only fixed properly when I cut the hose too short for it to get to the problem area (steps) at the far end of the pool.
Based on the reviews in this forum, I bought an Onga Hammerhead when the Kreepy looked like it needed another expensive overhaul. It hasn't missed a beat from the moment I put in in my (vinyl) pool. It has been 4 weeks now, and it hasn't been stuck once
Highly recommended.
Similar opinion? Write a review on ieatwords.com.au!
LmrAU
- 6 reviews
perfect so far
Original Post Nov. 2015: bought this after my dolphin broke down, which only lasted 2 years and was "fixed" 3 times. After reading the reviews on product review we thought even if we had to replace this every couple of years it was still more cost effective than the dolphin. So far we love it, it actually cleans better than the dolphin did for a 1/3 of the price.
Update Jun. 2018: Still going really well, so much better than the dolphin.
Similar opinion? Write a review on ieatwords.com.au!
StaceySippy Downs
- 2 reviews
Terrible. Had to return it after only 1 year!
We had nothing but trouble with this cleaner. It constantly got stuck in the corners of the pools, it wouldn't clean up in the shallow end of the pool and after only one year the head fell off numerous times! Thankfully I was able to return it and receive a full refund. I wouldn't waste your time or money!
Similar opinion? Write a review on ieatwords.com.au!
Onga Hammerhead
I have had two Hammerhead pool cleaners in 4 years. Yes they work, but not for long. The three year warranty is useless as it does not cover the skirt or foot, the main items of the cleaner. I was actually told by Pentail in SA that these come out of the factory perfect 100% of the time and would not even bother to look at the defect.
Similar opinion? Write a review on ieatwords.com.au!
Find out how Onga Hammerhead compares to other Suction Pool Cleaners
Know better, choose better.
GarryPerth
- 3 reviews
- 2 likes
- Verified purchase
Love It.. Far Superior To Kreepy Krauly
I've had the hammerhead for around a month now and I can confirm it's a far better product to the Kreepy Krauly products. I've had prior to this (I have had 3 KKs over the last 20 years). I was prompted to get one based upon reviews here and also the price. I can confirm there is no sticking in one place, no climbing too high, no avoiding the shallow end. It's very quiet and it's construction seems strong with less individual bits to wear and adjust. Even the sole plate seems to be more robust to the KK one. Which I was always having to replace. Easy to set up too. Just follow the instructions and it's off. Make sure you get enough hose so it can traverse the whole pool.
Similar opinion? Write a review on ieatwords.com.au!
GregRichmond-Tweed, NSW
- 7 reviews
- 9 likes
- Verified purchase
In My Experience, Better Than Most
Have had automatic pool cleaners since the original Kreepy Krauly days in the 70s. Progressed through the Barracuda. Recently purchased an Onga HammerHead to provide a replacement for a Barracuda that was not young at the time of moving in to current residence around nine years ago.
(BTW, given the Onga Hammerhead is marketed in the U.S. as a Kreepy Kruiser (or Kreepy Kruser), does anybody know whether the Hammerhead is indeed a product of the original Kreepy Krauly mob?)
Initial impression is the unit seems well-designed and a natural p...Read more
rogression on the hammer and diaphragm cleaners I have used in the past. And (touch wood) seems to be performing its job without any dramas, so far. I do, however, have a couple of observations on some of the user reviews here on the Hammerhead: Firstly, when there is a vast majority of 4/5 star ratings and a handful of "Bloody Awful" ratings, especially with a product such as this, perhaps at least some of the dissatisfied purchasers need to ask themselves whether their problems are related to their setting up of the unit, rather than the unit itself. By their very nature, automatic pool cleaners can be fiddly and problematic when first setting up.Similar opinion? Write a review on ieatwords.com.au!
This pool cleaner has a superior bumper design and a more reliable vacuum mechanism
Congratulations! You designed the Keepy Krauly pool vacuum much better than the Barracuda. It never gets hung up on the pool steps, it seldom needs a debris unclog and so far has never come apart at the bottom of the pool. My previous pool vacuum had all the above problems, plus it had an interlocking hose system that is incompatible with other brands. I now have a really clean pool which saves me the labor of vacuuming it out by hand every week. Thanks for "building a better mousetrap" .
Similar opinion? Write a review on ieatwords.com.au!
MarkpSydney
- 3 reviews
- 2 likes
Not too bad
We have had this pool cleaner for 4 months. It is better than our previous barracuda cleaner. The only disappointing aspect is cleaning of tight corners it struggles with, and we have tried numerous times to adjust the parts. Overall it is still worth purchasing if you consider value for money. We still would recommend buying this cleaner.
Similar opinion? Write a review on ieatwords.com.au!
RoyBoyPerth, WA
- 8 reviews
Bloody Bewdy
Recently bought a house with a pool. It had the remnants of a cleaner, hose & fittings, but no cleaning head
After doing some research, I realised it was a Hammerhead
After reading these reviews, I thought I would give this one a try
Managed to find a new [unused] second hand one for $200 complete
Followed the instructions to the letter, used the new hoses, adjusted the weights, & it cleans my rectangular, 8 x 3.5m, pool thoroughly in about 4hrs
Mainly sand getting blown in, very little leaves [Busselton WA]
From what I`ve read, it`s very...Read more
1 comment
As a follow up, after speaking to a "pool guy", if you are having trouble with a cleaner getting stuck in a corner, rotate one of the hoses 1/2 a turn. they eventually get a "memory", & that will chan... Read more
ge the cleaner`s motion through the pool Hope that helpsSimilar opinion? Write a review on ieatwords.com.au!
GregBrisbane
Better than Baracuda
I've had a Baracuda for about 6 years. After replacing so many parts over the years i decided to look for a new cleaner. Decided to go with the Onga Hammerhead and am extremely happy. Cleans the pool, never gets stuck and is very quiet compared to my old Baracuda. Unbelievable price too!
Similar opinion? Write a review on ieatwords.com.au!
Find out how Onga Hammerhead compares to other Suction Pool Cleaners
Know better, choose better.
NishanSouth East Queensland, QLD
- 19 reviews
Wonderful!
We've had a few pool cleaners in the past - the Kreepy lasted a few years but started to play up. Since then two others worked for six months and that was it. Ordered the Onga Hammerhead from Bestpoolsupplies online. Received it in less than 24 hours by fast courier - quite surprised. Assembly was easy. The product feels way more robust than anything we've used before. The hoses connect very well and are strong. The whole thing feels a lot sturdier than the others we have tried before. It is working wonderfully. Fantastic!
Update 10/07/2015:...Read more
This still works perfectly - no problems at all. Haven't had to clean it once yet - and it is nearly 18 months old. I am so grateful for Product Review - as I would never have gone for this brand - as I had never heard of it before I bought it. Update 10/01/2016: Works so well that I have bought a second one for my parents home. Sturdy design, feels solid and well fitting connections. Nice colour too. Nothing.Similar opinion? Write a review on ieatwords.com.au!
BogratCaboolture
- 4 reviews
- 1 like
An Outstanding Cleaner
I bought this to replace a very old Zodiac. For the price I thought it would not clean as well as the Zodiac but, to my surprise, it cleans the pool perfectly and is way better than all the cleaners I've had before.
Spend the time to get the right suction and you will be very happy with the job it does.
Similar opinion? Write a review on ieatwords.com.au!
Rajan LuthraSydney
- 3 reviews
- 3 likes
THE Best
Using Onga for almost a year. IT IS THE BEST. Cleans the pool perfectly.
i wish I had bought this earlier. I would saved heaps of money in repainting
Similar opinion? Write a review on ieatwords.com.au!
LeanneTamborine Queensland
- 4 reviews
- 3 likes
Works really well, quiet and efficient
We own above ground pool with a vinyl lining, and have heaps of leaves...
After looking at many cleaners, we choose the Hammerhead.
Good choice, works very efficiently and is quiet.
Similar opinion? Write a review on ieatwords.com.au!
Andrew
- 2 reviews
- 2 likes
The best pool cleaner I've bought to date.
I used to have a Barracuda as well in the beginning. It was ok but noisy and eventually died. I've then bought a few cheap replacements (from Bunnings) and they're just a waste of money. This one is quiet and seems to cover to whole pool very well. The bottom of the pool is now spotless!
Similar opinion? Write a review on ieatwords.com.au!
Questions & Answers
Trudyasked
Does the adjustable regulator valve need to be fully submerged or can it sit half way out of water
2 answers
The small "flap" that the adjuster knob stiffens or releases to control the flow needs to be below the waterline. If it's not it will suck air into the filter system. The adjuster knob can sit out of the water.
Thank you Grant.
I got it all sorted on my own.... working like a champion now. I was very proud of myself haha
Ross Pasked
The Hammerhead in my concrete pool regularly comes up the side of the pool and stops above the waterline, sucking air for about 30 secs. until it falls back into the water and does nothing until the air goes through the system and begins to function normally again. Any ideas on how I can fix this ?
Thanks
3 answers
This is usually what happens when there's too much suction. Use your flow gauge to check. To reduce the amount of suction, turn the adjustable regulator valve until the suction is within the "Maximum" and "Minimum" range.
Ok,thanks Grant.I'll adjust that & see if it behaves itself. Im new to this pool maintenance thing so its a bit of a learning curve.
Hey Ross. Adjusting suction didn't seem to help mine. Instead I've now put one of the provided weights onto the first piece of hose closest to the suction head and it about 95% successful with the out of water issue now very rare. Its a bit of trial and error to find the right spot on the piece of hose.
Geoffasasked
The triangular wedge that oscillates to move my Aldi cleaner has split. The size is 85mm long by 45mm wide by30mm high. Have searched everywhere. Any ideas where I might get a new one?
No answers
ieatwords.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ieatwords.com.au may earn commissions for products/services purchased via affiliate links.
HCB
And it simply keeps on going about doing what it's meant to do......well. Not a single complaint, not a significant problem since purchasing this great pool cleaner