10 questions from our users
Miroasked
Looks like all of us that bought that unit have same issues. Not a good design or a good service from apparently great company. Keep me informed if any of you resolve this problem with the blue lights. Thanks
No answers
Miroasked
I have a range hood debeta 90 which doesn't work now it has a blue light lit up fan button 3 is lit up. Will not do any thing? It has just been instolled last year . even tho its out of warranty, it was sitting in the box for few years. ( was working when we tested it and all was o.k. it has newer been used. I have just seen the blue light on few days ago. ( the instruction book says something about 15 min timer ) i have no idea what that is and how to use it. What do i do. Regards Miro
7 answers
Did you manage to fix this? We are having the same issues. Thanks
Same issue here. I'll report back once I work out what the problem is. I'm guessing it's most likely the control module that hosts the buttons. Must be some kind of common short circuit or corrosion issue. I'll likely crack it open and inspect my unit this week.
Hi all I have rang the company and the only answer I got was, we can sell you the new unit as its out of warrantee," not happy " My unit is actually new, newer used as we stil haven't shifted in to the apartment. To me this means that the electronic module inside the unit is a faulty design.
Hawkieasked
How do you access the push buttons for replacement? I have the new box but can’t access the mounting screws?
No answers
Benasked
Any information what's wrong with my debeta90? And what part needs replacing? Blue light on no.3 fan control always on and lights and fan not working. Only 3 years old.
6 answers
i have exactly the same problem but dont knw how to fix
Replacing the C1 capacitor on the control board fixed it for me: https://drive.google.com/file/d/1fGcdUQMExwhysOfUXBIoYqa4gUvnyhHl/view?usp=sharing
See my response to "Miro's" question for more details.
Hi Wardrop - perfect solution, although my unit is 5 years ? old - suddenly the blue light stayed on, and nothing worked. Hard part was to remove the switch block LOL - but then off to Jaycar to buy a $0.75 capacitor. Installed on circuit board - all works perfectly again ! Thanks heaps.
Dave
Bill Wasked
I bought the delonghi 60cm canopy rangehood two years ago. In the past two years, this hood has not worked much. I heard from my colleagues that their hood can even pick up a piece of wood, and I tried to this ONE. The delonghi 60cm canopy rangehood can't afford a paper. I don't know where it went wrong. It has been like this for two years. Any suggestions?
No answers
Rodasked
I have a range hood debeta 90 which doesn't work now it has a blue light lit up fan button 3 is lit up. Will not do any thing?
Elizabethasked
I recently purchased a DEBETA90 (3 months ago) and now, there is a leak of oil from the motor and the oil drips directly into the cook top. both sides of the motor were leaking oil. Is there something wrong done during installation? I hired a professional electrician to instal this.
1 answer
Hello Elizabeth,
Is the oil just accumulated cooking oil? Yes oil does drip off the sides of the central unit, but it should be captured onto the filters. The filters are dishwasher compatible so you can simply pop them into the dishwasher to clean them. I assume it is leaking through the filter onto the cooktop. If you don't have a chance to put the filters into the dishwasher, change the middle filter with the left or right and the the filter should be able to catch the dripping oil. I have a fully vented flue on mine. Ie if you have a vented or recirculating system, you can expect oil to accumulate on the filters from the central motor. Best of luck with this.
Catherineasked
Hi Helen from Sydney,
I'm from New Zealand and I have similar problem with my DeLonghi Rangehood after 7-8 years. I sent it to LV Martin for servicing but they said they couldn't find the motor. Do you have any idea where can I source for the motor? Thank you. Catherine
1 answer
Hi Catherine,
The touch pad circuit board(i.e the electronic button board) was changed which is behind the buttons at the front of the rangehood. It cost $130 plus labour(which I negotiated a lower rate) and GST ending with a total price of $187.00. I hope you have success in getting the problem identified and fixed. The service company gave me 3 months warranty. So far no problems. Good luck. Helen
martineasked
What is the dba for the debeta90?
1 answer
I can't find a sound level rating for this machine. However I have the debeta90 model and I can easily have a conversation at full speed. I need to speak up but don't need to shout. I estimate it is 65-70 db.
ieatwords.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ieatwords.com.au may earn commissions for products/services purchased via affiliate links.