- Sign in
- Write a review
ALDI Petrol Chainsaw Questions & Answers
Gardenline 50cc Chainsaw (Aug 2011-2015), Ferrex / Gardenline 53cc Chainsaw (Mar 2018, Mar 2022, Mar 2020), Gardenline / Ferrex 45cc Chainsaw (Apr 2016, Oct 2016, Aug 2017, Sep 2018, Oct 2022), etc... (See All)158 questions from our users
It's funny that all the chainsaws have the same things wrong with them I have one here along list of items I replaced it still no working ?
I have a ferrex petrol chainsaw starter cord snapped took apart put a new one in now I have no recoil. Any ideas?
Hi my question is how to change volume of oil bar I have 4stroke petrol chainsaw it’s using too much oil bar I want to put volume in low, unfortunately I lost instructions book so I don’t know how put the bar oil volume in low or medium so serial no 010693 and product no 703060 thanks
How do you repIr the starter swing
how to change the bar oil ?and how I can use the oil ?
Bought the Aldi chainsaw,
Followed the instructions, turned it on and the chain is not rotating
Check that the chain lock is activated. To deactivate pull the chain lock lever back towards the grab handle - requires a firm pull. When chain lock deactivated the chain should rotate freely around the guide plate.
How do I disengage the brake?
My Ferrex 4-stroke no longer has spark. Where can I buy an ignition coil?
Is there a chain break ?
the chain wont move but the cogs that hold it move when unassebled
Yes there's a chain break. When you start it the chain brake is in the forward position. Pull it back towards you and you will be good to go. ( the black handle at the top)
Chain wont move but unassembled the cogs move why?
undo the chain tension-er put a punch in the hole on the chain bar lightly tap chain bar back towards motor .check to see if chain moves freely with chain brake in forward position. then lightly tap the chain bar outwards till the chain is tight again but still movable.then re tighten the tension-er it should work after that.sometimes the on off switch is installed so the stop position is actually the start position.
hi my name is Tim just bought a Ferrex chain saw from Aldi is the motor oil the same as the chain oil
I have a Gardenline 45cc petrol chainsaw and looks like the chain tensioner is faulty or broken.Looks like the threaded rod has come out of the adjusting cog, thus not turning.Can that be fixed or can a new one be bought.
What's the size of chain for ferrex 4 stroke chainsaw
When will you have electric chainsaw?
Is there a specific tool for the high/low idle on the four stroke 45cc. This one seems to just have a small hole to one side of each mixture screw. I know my husky has a tool,but most are flat head screwdriver to adjust. Any help with this would be appreciated. Thanks. Pete.
I bought a chainsaw at Aldi Wanneroo - it never worked, the first time I tried the starter chord broke, I tried fixing it to no avail - still wouldn't start. Sadly I lost the receipt and the staff would do nothing to help me when I took it back. Very disappointed.
I bought one of these 53cc chainsaws in march 2022. The first time I used it everything went fine. The second time I used it was April 2021. When I opened the carrier, chain lube oil was everywhere, I don't know why. I managed to start it and everything was fine until I turned it off, but It would not not start on the second attempt. Start rope will only move 6 inches and something is stopping it operating freely. Frustrated
The chain oil leaks in most chainsaws, Chinese ones more so. Did you leave the same fuel inside the chainsaw this whole time? Because if so that’s most likely your issue. Best option is to empty out the tank and put some fresh fuel in, could be a build up of carbon or something else causing the starter rope stiffness, once you get it started leave it running for 5 mins or so minimum to get rid of all the stale fuel and you should be sorted
Yes I did replenish with fresh fuel and it did run ok initially but not the second time. I took the spark plug out and the rope pulls out ok. The spark does not appear to be very strong and although I primed the fuel fifty times or more, the plug was still dry and I wonder if the fuel is getting there. My biggest concern is why the rope is not releasing to it's full extent when the plug is in.
How to adjust chain in Model GCSG50F
Where can I get a chain for my chainsaw at ?
Would like to buy a spare bar for my 2020 Ferrex 16inch chainsaw. There must be generic bars that fit but cannot find info. Thanks for any help.
Get an answer from our members and ALDI representatives
Other Petrol Chainsaws
ieatwords.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ieatwords.com.au may earn commissions for products/services purchased via affiliate links.