Holman Dial EZY Controller Questions & Answers
How do I clear a flashing power fault on my Ezyone mini?
Hello Judy S. you cannot clear this until the issue is fixed. There is a power problem.
For support, you are welcome to call us direct on 1300 716 188 or [email protected]
Hi can any one help me please?
My sprinklers aren't spraying any water out of any single one on all stations, even tho the display is showing its running a station and time counting down. I tried all stations manually, and run test. But still no water coming out and display showing its working.
Hello Ramona, For product support, kindly call us on 1300 716 188. Thank you, your Holman Team!
Hi ramona mine is doing the exact same thing did you figure out how to fix it?
Hi Michael, remove the 9V battery to see if the screen is still displayed. If not, there is a power issues. For product support, please call us on 1300 716 188. Thank you, your Holman Team!
I just purchase the ez 8 station. I have 4 stations. I set up station 1 to 4 but station 3/4wouldn’t work. I reworded those to 5 and 6. Worked great for one day. Next day I went out and it won’t turn on at all. Unplugged power from both outlet and controller. Still nothing. What could be the issue after one day? There is power going to power supply
Hello Trish, have you checked the fuse?
If you need assistance with troubleshooting, please contact us on 1300 716 188. Thank you, your Holman Team!
When I turn the dial onto the run single station test the station number doesn't show up all that shows is the time
How to change the 9v battery?
Hi, please remove the bottom panel on the irrigation controller. On the left-hand side, there is a 9V battery Snap-On for connecting the battery. Anything further, please contact us directly or refer to your manual. Thank you, your Holman Team!
My Dial Easy has one program running 6 stations with one daily start time and has been running OK for 7 years . It has now started to switch off after running for 3or4 minutes then switch on and off for the remainder of the run time. This happens on both “ Auto” and “ Test run the program”. However, if I test run one station it runs right through the run time. Why is this so?
John Thompson
Hello Yeye, thank you for your query. For product support, please contact us directly at holmanindustries.com.au or 1300 716 188. Thank you, your Holman Team!
I had a Holman btx8 and it shorted out after having it for a few years now (can’t find the receipt to know how long) so I have recently brought a Holman ezy one x and I set it up all and did a system test and it was working for the first 3 stations then it stopped and was flashing up power fault and now it won’t turn on any stations
Hi Sid, sorry to hear this! Please call us directly on 1300 716 188 for assistance with your controller.
Thank you, your Holman Team!
I have set run days Mon, Thurs, Sat at 7.40pm Station1 - 3 minutes Station 2 - 3 minutes. This uses 85 litres.
I have been having high water consumption 1,600 litres instead of usual 250 litres.
I noticed the sprinklers were running Station 2 on a Friday and I don't know for how long.
I was away for a few months and saw my water consumption over 1,500 litres per day on my bill and had the neighbours shut the main stop valve to my house.
Why are the sprinklers running when not programmed?
I have now turned the sprinklers off.
Hi Bill, for product support, please call us directly on 1300 716 188. We have an excellent customer service team avaliable to speak with you. 7am till 4pm AWST Thank you, your Holman Team!
My Homan controller turns on the reticulation everyday at the set time even though the set days are on rogram 1.
Program 2 and 3 are not set.
It appears that our Holman is running the same program 3x over. Why would this be? it will run station 1-3 for it’s allocated time, and then will restart back at station 1 an run through to station 3 again.
I have EZY Gardener 6 stations
I have set the start time and made sure the timers are off on stations 2,3 and 4 but I can’t see stations 5 and 6. How do I check those please
Jean
Can you bypass m station on Holman EZY ONE X and just install 3 stations straight to controller from solenoid
Hi tjimmies, for product support please call us directly on 1300 716 188 or [email protected] Thank you, your Holman Team!
Hi,
I’ve moved into a property with a Holman EzyDial. It runs fine when I test one station at a time manually but is not running in auto mode. I have checked the days, times a length and all ok. What should I check next?
Hi Vicki, for product support, please call direct on 1300 716 188. Thank you, your Holman Team!
Got a Holman ezy retic controller and it's flashing power fault. Any possible ways to fix this easily? The house power is back on and every time I try and test a station everything works fine on the controller itself but just won't turn the station on
Hi Tim, Power Fault means not mains power. The screen is being powered by the battery but it needs 24V to fire the solenoids. For product assistance, please call us directly 1300 716 188. Thank you, your Holman Team!
Our Holman dial ezy is about 8 years old. Recently it keeps running station 2 when station 3 comes on thus reducing the sprinkler cover for that station. What can I do?
Hello Gerri, this sounds like a dirty solenoid. locate and flush station 2 solenoid to give it a clean. any further queries, you are welcome to call us direct on 1300 716 188. Thank you, your Holman Team!
I have dial ezy 6 station outdoor controller
It works fine till about 6pm and when it is running the 3 stations it keeps going on and off and on etc so sprinklers keep popping up and down
I have tried changing the time it comes on to an hour later makes no difference
It gets a bit of sun on the controller for about 45mins
It works fine on other set times could the sun on the controller be causing the problem ?
i have new lawn so need to water several times a day
Update - it is now doing it all the time, eg - turns on and off through all programmed cycles and all stations can hear the solenoids clicking on and off
Starting to think controller is stuffed and it's only been in operation for 6 weeks
Get an answer from our members and Holman representatives
Extra Information
ieatwords.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ieatwords.com.au may earn commissions for products/services purchased via affiliate links.