??!

Reviews

1.8

10 reviews
5
(0)
4
(2)
3
(0)
2
(2)
1
(6)
  • Build Quality
    2.0 (2)
  • Value for Money
    1.5 (2)
  • Ease of Use
    3.0 (2)
  • Cleaning & Maintenance
    1.5 (2)
  • Product is used
    • Weekly (1)
  • Noise Level
    3.0 (2)
  • Safety
    3.0 (2)
  • Hill / Slope Performance
    3.0 (2)
  • Turning
    3.5 (2)
  • Wet / Damp Grass Performance
    2.0 (2)
Previous
Next

Very Disappointed in this mower

published

Purchased in December 2021 for $7,000.00.

Build Quality
Ease of Use
Cleaning & Maintenance
Value for Money
Functionality
Hill / Slope Performance
Turning
Noise Level
Safety
Wet / Damp Grass Performance
See all answers
greenlightelec ..

greenlightelec ..Illawarra, NSW

Not much chop.

published

Purchased in July 2021.

Build Quality
Ease of Use
Cleaning & Maintenance
Value for Money
Product is used Weekly
Functionality
Hill / Slope Performance
Turning
Noise Level
Safety
Wet / Damp Grass Performance
See all answers
Herb

HerbTauranga

A big disappointment and sold as quality

published

This is the third rideon of this model i have owned. The first two were great how ever the one i have now is dreadful. While under warranty it has blown two head gaskets,had the carburetor replaced and still severely backfires when turning the motor off after doing a couple of hours mowing.



Date PurchasedAug 2016
Ride-On Mowers

Find out how Kubota T Series T2380 compares to other Ride-On Mowers

Know better, choose better.

Compare all

Worst mower ever

published

This mower has been nothing but a headache from day 1. Cut is uneven and constant part replacement and repair work necessary. What a disappointment. Have always bought Kubota mowers and never will buy another, nor will I ever recommend one. Pulleys need constant replacement. Just JUNK. Repair/Replacement parts are expensive. Had in dealer for repair 3 times in first season.

Date PurchasedApr 2010
doug

dougkinglake vic

  • 3 reviews
  • 1 like

heap of junk

published

i thaught i had a quality unit but i was wrong i will go to a different brand next time 100 hrs new belt pulleys on deck cost $500 dollars now the drive is stuffed its only done 200 hrs now i will never buy this brand again it has been serviced on time and has only been used by me not a very good product

Date PurchasedApr 2016
Ken

KenBrisbane

Bitterly disappointed. Totally rubbish cutting deck

published

Parts used within 50hours of use:
2 x tensioner pulleys
4 x deck belts
2 x deck drive belts
2 x drive belts
Cutting deck required straightening after 15 hours.
Won't cut grass. Flattens it rather than cutting it. Leaves a strip between blades.
Low engine power. Been to dealer 3 times.
This is without question the worst purchase I have ever made.
Signed Totally Disappointed with my mower

Date PurchasedMay 2015

KUBOTA T2380-A.Well Built Tractor Mowet!

published

Kubota T2380A-48 Tractor Mower chosen over prior major brands. This unit built better. Much easier to use to go forward and back to mow in tight space and there is red blinking light to let.you know it is bidirectional mode. Product advertised as 23hp Kohler motor. Delivered unit just built this morning had label with 22hp Kohler??

Why tractor mower? I have lawnmower trailer attached to tractor mower's trailer bracket loop hole to attach small trailer to pick up fallen broken tree branches off mow areas. This saves wear and tear on the blades.

Prior brand 54" ride tractor mower, spindles replaced 3 times.. The new delivered unit (unused), had bent spindle.. New replacement belt kept coming off after install..

Date PurchasedOct 2016

will replace with another

published

had a 2380 mower at a school 5 days a week never gave me any trouble great on all types of ground great ride change one drive belt in 2 years very good on fuel easy to mow around buildings starts first time ever time no problems on slope ground

Date PurchasedFeb 2011

Utter rubbish for Kubota

published
1 comment
Bazzmen
Bazzmen
Ride-On Mowers

Find out how Kubota T Series T2380 compares to other Ride-On Mowers

Know better, choose better.

Compare all
tc1959

tc1959Sydney, NSW

T2380 - Expensive, Over-rated belt-chewer!!

published
1 comment
tc1959
tc1959
See all Kubota T Series reviews

Questions & Answers

Dana

Danaasked

T Series T2380

My mower has 2 blades a black one that's left hand thread and the other is red right hand thread. I'm unable to find replacement blades. All I'm able to find are 3 blades. Any help?

No answers
Jas

Jasasked

T Series T2380

I go to engage the blades using the yellow lever and the mower engine dies. All the fuses seam fine and I am not in reverse and I am sitting on the seat with the mower brake off? Please help?

1 answer
Deanp
Deanp

I have this same problem. Have you resolved it?

alan

alanasked

T Series T2380

Why do I get a strip of uncut grass down the middle after I have mowed? Checked tyre pressure, had dealer, hills district farm equipment, look at it in their workshop. No fix. Also bends grass a lot instead of cutting it. Run at full revs, tried different deck heights, tyres ok. Blades ok according to dealer. Machine is 4 months old, also, it just stops by itself for no reason after running for about 15 mins but will start again after a few cranks.

3 answers
Bazzmen
Bazzmen

From time to time we hear of Dealers who don't do the right thing by their customers. From the day you put your machine on your property he should have been making sure the machine was suitable for the work you were going to be doing with it, and the machine was capable of achieving the finish you required. Plus adjusting the machine accordingly to the manufacturer specifications. There should not be any uncut grass down the middle as a general rule, you may see a mark after passing but not uncut grass. That's why two blade decks have one spindle slightly ahead of the other to overlap the other blade. The argument for having a three blade deck then raves on, and removes the possibility of any misses. As a suggestion make sure you are using full revs when mowing, just because you have revs you don't have to drive fast, and if the grass is too tall and the deck is folding it over, make two passes with different deck heights. Blades don't have to be super sharp to achieve a fine finish and I have no answer to that question. However the machines engine is not running correctly, could be many reasons, blocked fuel filter, air locks, pinched fuel lines, but that's the dealers job. In NZ we have something called the Consumer Guarantee Act where if anything is not suitable for the purpose it was sold to you, you get your money back, no argument !! I don't think you are ever going to be happy with this machine, I wouldn't be either, don't let it tear you apart get rid of it.

I see with other correspondent. Bending grass over is often caused by going too fast keep revs up and slow down.
I would take machine to another dealer regarding cutting out and leaving a gap. It should be adjustment.
Good luck

alan
alan

Thanks for your answers on this. NZ's approach with the Consumer Guantee Act is a great move and shows genuine concern for customers. Not like here where dealers get away with very poor after sales service. I ended up doing exactly what was advised after the dealer was not going to rectify the issues. I just did not want to do battle with him and have to deal with toothless tigers who pretend to be authorities. I have traded it in on a completely different and far more appropriate machine. Solid as a rock, not like the plastic rubbish put out by Kuboto these days.

Get an answer from our members

ieatwords.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ieatwords.com.au may earn commissions for products/services purchased via affiliate links.