Pope Aquazone Trio Tap Timer Questions & Answers

There seem to be a number of complaints here about the failure of the solenoid on the Pope Aquazone Trio. I have the same problem. In my case the graphic on the panel shows the watering has commenced - but no water coming out. Tap is on! I first noticed this when the A zone stopped. But eventually, the B and C zones have stopped as well! Not happy!
Do I persist with returning under warranty? I probably haven't kept the receipt. Is there any way to identify the age of the unit from a serial number?

Hi, can you set different days for diferent zones on the AQUAZONE DUO WATER TIMER 1010377 ??? or do both zones have to work on the same days???

Can I get a manual for the aquazone trio (1010378 ) as my father has misplaced it, and need to reset it?
Thank you John Vincent. email [email protected]

Solenoids stay open all the time-batteries replaced - this is second unit that has failed out side warranty period so not eligible for replacement but not happy with quality.
Any recommendation other similar none Pope/Toro products that will not fail outside warranty period but far too soon ?

I have installed the Trio, set it up as per the instructions but when I turn on the tap, one zone runs when it shouldn’t. The other two zones operate correctly. Any ideas?

Hi I just started searching as my pope aquazone trio has been changing time since day one, never thought about bringing it back as I thought it was maybe caused by the sun.
So it is outside guarantee. Now I see that the unit is actually faulty, does Pope stand by its product and still exchange my unit for a non faulty one?

I purchased one from Bunnings a few months ago and it worked fine. Until the batteries ran out, which is, in my mind, problem number 1! I would have expected the batteries to last longer than that, particularly since I will be going on a 6 week overseas trip.

Anyway, I replaced the batteries and re-installed the timer before going away for four days last weekend. It appeared to be working just fine. Upon my return, I discovered that although it appeared to be working and showed all the right things on the screen including an image of a running tap, no water was coming through!

Hey, after spending $99 for the darn thing, I do have an expectation that it works! Not happy!

I can’t get water to run through my pipe Aqua one water timer - suggestions?

What is the rubber button for between B & C outlets.

I have had this system before, so know how to set it. The new one l have has the tap running on screen but doesn't open the outlet, so no water coming out.

Hi
I bought three trio timers yesterday. Two of them run zone c continually when the tap is on regardless of setting. I have removed and replaced batteries but the water still runs, any ideas.
I already have three of these units running ok, only issue is that they randomly change the time of day
Cheers
Wayne

I cannot get the manual to go shows the tap on the screen with drops of water but will not turn on ?? I have followed the instructions and press ok etc and manual twice to set ??? Brand new ??

I've had my trio timer 18 months with no problems until today when I had a small flow of water exiting from outside the three outlets onto the ground weather the're programmed on or off. I'd like to know what the small rubber plug situated between outlet B & C is for?

Anyone know why both zones keep turning on at the same time even though they are scheduled for different times. This happens both when put on manual mode and when it turns on automatically it’s now the third unit I have bought for this one tap only to have them all do the same thing. I don’t get the required pressure when both zones are on at the same time.

Can I close or shut off individual zones but still allow the other/s to water?

my triotimer doesnt start up, i have tried replacing batteries and the screen lights up for a moment to only fade again...
i managed to get the screen to display and spent over an hour getting the timings set...

now the valve doesnt open even when the icon displays it watering

Is there a re- set button or procedure fo Pope AqoaZone 1010378

Is there a re set button/ processes so that I can start again.
Pope, AquaZone 1010378

Recently purchased Aquazone Trio Water Timer. Want to know how I can disable Zone A which is connected to hose for manual watering and programme Zones B & C for regular watering every two or three days. Can anyone help!

All settings have been done, water is turned on, switches in correct position but no water coming out to the hoses. Unit says it should be watering. I'd love advice on how to fix this. This is our 4th unit.