- Sign in
- Write a review
Uniden G2740
Will not recommend, brought the 4 camera system, the battery on the monitor has died, and Uniden will not supply replacement, have to send unit to Sydney at my own cost for technician to have a look at it and give me a quote, minimum $85 bucks, and could be more, during the time using it, found it very unreliable, had to turn cameras on and off to get a pic, sometimes.
- 3 reviews
I have this system with four external cameras. The two cameras mounted the greatest distance from the monitor have operated with the least problems. The other two cameras, which are mounted much closer to the monitor, constantly lose signal requiring their power supply to be turned off / on again to regain signal. My next door neighbour has the same system and is experiencing the same problems. Neither of us would recommend this (nor any other Uniden) product to anyone based on our experience and the lack of support offered to address these issues.
Purchased in February 2018.
email is [email protected]
Thank you for providing the details.
I have escalated your case for a technician to get in contact with you....
Read more Should you require any further inquiries please don't hesitate to contact Uniden Support at [email protected]- 3 reviews
This system needs to be plugged into the 240 volt mains all the time as the tiny battery in the receiver /monitor doesn't last long at all.
Eventually the receiver/monitor died rendering the whole system useless. I think it may have been the battery but I am not sure.
While it was working it was an average system for security as the motion detection on high records almost constantly and on low can miss a person walking in front of the camera. A variable dial or maybe at least a medium setting would have been useful.
Purchased in June 2014 at Officeworks Physical store for $600.
- 10 reviews
- 5 likes
I have been using and putting up with this camera system for a few years.
When you try to connect via the app it is hit and miss some times it will connect and other times it wont.
The cameras are not that far away from the base station and still I have trouble gaining a stable connection when I rang uniden head office they told me that that is because of the walls and that it is an old system, even though the cameras are only 5 or so meters away and only 1 wall.
The picture is very grainy and you cant make out what a number plate is or what a person's face looks like when they are walking.
Called uniden head office and was told the new ones are a lot better that is the type of camera it is.
Very poor.
Find out how Uniden G2740 compares to other Wireless Surveillance Systems
Know better, choose better.
- 4 reviews
- 3 likes
If you are getting a 'Record file error' message coming up on your monitor it's because you need to install a Sandisk 32GB High Endurance SD Card ($26- on eBay) instead of anything else you may have installed. I'm a technician & have installed nearly 50 of these Uniden Guardian G Series CCTV Surveillance Systems & they are quite good quality considering their price.
September 2nd 2017 Update: Good economical CCTV System
I'm a technician & have installed over 40 Uniden Guardian G2740 / G2940 CCTV Surveilance Systems & find them to operate ...
Read morequiet well. You need to use a Sandisk 32GB High Endurance (10) SD Card for the system to work well otherwise you will get a 'record file error' message. These SD cards are only $26- on eBay. Also I have found it good practice to silicon the inlet at the rear of each camera where the cable enters the housing to stop it being affected by UV from the sun if located externally.- 9 reviews
- 4 likes
Bought this unit recently which has 4 camera. cameras will communicate to the main unit as soon as you turn them on, so no configuration is required, which is cool. it can record video on a SD card and can support up to 32GB SD card. the only down side is that these series do not support overwrite video function on SD card (using the latest firmware V-A2.4.5-50hz) which is a big design issue (you will need to format the SD card every few days!!!). contacted with customer support about this. Apparently in the previous firmware version (V A2.2.8-...
Read more50Hz) overwrote support was active but there was a "video record error" message, appearing on the screen constantly. They resolved the issue by removing the overwrite function. I have not tested the app to see it will connect to iPhone/iPad remotely. Will update soon.Questions & Answers
新买了一个
Monitor,怎么连接旧的摄像头
Hi,
Please contact our Customer Service for further assistance....
Read more Uniden Customer Service Phone number: 1300 366 895 E-mail: [email protected] Business hours: Monday - Friday 9:00 AM - 5:00 PM Thank you!have g2740 but moniter does not work any more have a replacement or alternative ?
Hi,
Please send through an email to our customer service team on [email protected] who will be able to assist you further....
Read more Thank youHi ! Can you help me to find a new monitor for G2740 security camera
Thank you !
Hi,
Please send through an email to our customer service team on [email protected] who will be able to assist you further....
Read more Thank youGet an answer from our members and Uniden representatives
Details
Category | Wireless Surveillance Systems |
---|---|
Price (RRP) | 599.95 |
Release date | Aug 2012 |
Other Wireless Surveillance Systems
ieatwords.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ieatwords.com.au may earn commissions for products/services purchased via affiliate links.
Thank you for your review.
Sorry that your experience with our Uniden product was an inconvenience....
Read more Can you please provide a contact number or email? I can arrange for a consultant to get in contact with you.