Read also:
air fryer smith and noble talon ant killer gel coles best steam station irons 2016 australia pedestal fan with remote kmart kogan tv turns itself off
UNIMIG VIPER 185 KUMJRVM185 MIG/TIG/Stick Welder
AndrewMurray Region, NSW
Enjoy to use
Easy to use and set up ready to go light and easy to move around
A good range of welding supplied information
Great that it only needs a 10amp power outlet
Purchased in April 2021.
1 comment
Similar opinion? Write a review on ieatwords.com.au!
WillMurray Mallee, SA
Great value for money
My unimig viper 185 came with a starter kit and helmet so with the exception of gas, ready to go. Having never really mig welded before, its easy to set up and use.
For a beginner looking at doing a bit of hobby welding, or a home handy man for odd jobs - id highly recommend.
Purchased in February 2021 at Adelaide tools for A$699.00.
1 comment
UNIMIGUNIMIG
Thanks for the review, Will!
Similar opinion? Write a review on ieatwords.com.au!
RobertSydney, NSW
Great service on 20yo 172 led to this 185 purchase.
Got a deal on a Viper 185 to replace my old (40kg) 172. Really easy to use with the infinite controls. Using it on solid and gasless wire. Completely satisfied.
Purchased in December 2021.
1 comment
UNIMIGUNIMIG
Thanks Robert glad you’re loving your machine & we really appreciate the 5 star review, thanks!
Similar opinion? Write a review on ieatwords.com.au!
Find out how UNIMIG VIPER 185 KUMJRVM185 MIG/TIG/Stick Welder compares to other Welders
Know better, choose better.
BroadySouthwest, VIC
Great machine
As a novice welder, I've found the Viper 185 easy to set-up and use. The set up is intuitive and the instructions simple to follow. The machine is a delight to use, so much so that I'm looking around for things to repair around the place. I love t!
Purchased in December 2021.
1 comment
UNIMIGUNIMIG
Thanks for your review Broady! We really appreciate the positive feedback!
Similar opinion? Write a review on ieatwords.com.au!
JakeAdelaide
- Verified purchase
Beast of a machine... does all!
This was a small but big purchase. Compact and light but powerful and capable. Ive welded many thicknesses and it dialed right into it...Best feature, it doesn't stuff me around with bunched up wire feeds...Highly suggest the Viper... will be welding for years to come and anything I need it to weld. My store put me onto a winner!
Purchased in March 2021 at Adelaide Tools. 175 Railway Tce. Mile End 5031 for A$649.00.
1 comment
UNIMIGUNIMIG
Thanks for your recommendation, Jake!
Similar opinion? Write a review on ieatwords.com.au!
Travis T.South East Queensland, QLD
Unimig Viper 185
I bought the Unimg Viper 185 multi process machine from Hares and Forbes in queensland. I've been running it on 8mm flux core wire which has been great for me as I am new to welding and not quiet ready to invest in a gas bottle yet.
From my limited experience...the mig has been great...I've done a number of projects whilst learning to weld. All the info is supplied to set up the machine and their is heaps of info online if needed. There was a few occasions where I did have a question regarding the welder..a quick call to the support guys at Un...Read more
Purchased in July 2021 at Hare & Forbes Machineryhouse for A$600.00.
1 comment
UNIMIGUNIMIG
Thanks for your recommendation, Travis!
Similar opinion? Write a review on ieatwords.com.au!
Questions & Answers
Broadyasked
I'm currently welding using roll feed (Mig gasless) and I want to swap to MMA (stick). Do I need to pull off the MIG gun and wire spool, or can I just connect the MMA lead and flick the selector switch?
2 answers
UNIMIGUNIMIG
Hi Broady, yes that's correct you can just keep the wire and MIG gun connected. Just make sure you have the correct polarity orientation for the electrode you are using.
Thanks very much for your quick reply.
Seanasked
IS it gasless
4 answers
It can be either. Im using with gas because im doing automotive panels inside. But not hard to change to gasless mig. Just swap the wire out. But if you have no intention of using gas at all, there might be cheaper options available.
Will has it right. I use gasless when I need to weld outside the workshop, otherwise I use it on gas.
Haven’t used the TIG yet as I have an old Essetti that does the job.
Regards
Robert
The answers are correct. I use gassless because I'm only doing hobby work, and it's too much bother to have gas bottles.
Other Welders
UNIMIG VIPER 182 KUMJRVM182
4.4(13)Bossweld MIG 186
3.9(10)Tokentools Alupulse
5.0(3)Tokentools PAC50
5.0(1)Tokentools MIG250P
5.0(1)Tokentools Alusync 200
5.0(5)Other Welders
UNIMIG VIPER 182 KUMJRVM182
4.4(13)Bossweld MIG 186
3.9(10)Tokentools Alupulse
5.0(3)Tokentools PAC50
5.0(1)
Listing monitored by UNIMIG representatives.
ieatwords.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ieatwords.com.au may earn commissions for products/services purchased via affiliate links.
UNIMIGUNIMIG
Thanks for the review, Andrew!