Read also:
bellini dishwasher water supply error ing orange everyday debit card youi car insurance customer reviews 5 star chef bread maker aldi bauhn noise cancelling headphones kogan 32" agora smart led tv safe n sound maxi guard reviewUNIMIG VIPER 182 KUMJRVM182
Pauly DMetropolitan Adelaide, SA
- 4 reviews
What a powerful little beast.
Always enjoyed metal fabrication & laying that perfect weld down every time is a must. Setting this little beast up was simple, quick & the way Unimig has made the Viper 182 is perfect for me.
Purchased in April 2021 at Total Tools for A$655.00.
1 comment
Similar opinion? Write a review on ieatwords.com.au!
DanielDarling Downs, QLD
UNI MIG VIPER 182
Was recommended by a friend, This is awesome welder, coming from just a stick, makes my little jobs fun. Easy to use was given a run down by where I bought it from Sedl Agencies on how to use it and install wire correctly.
Purchased in January 2021.
1 comment
UNIMIGUNIMIG
Thanks for your review, Daniel!
Similar opinion? Write a review on ieatwords.com.au!
Greg McTSouth East Queensland, QLD
- 3 reviews
I can’t believe how good this machine is
I’ve owned a basic Mig Welder for home hobbyist work for twenty years and can’t believe how good this machine is. I’ve always used solid wire/argon and that’s how I use this machine. Neat features like burn back control to prevents those constant wire sticking problems, and the manual feed button for loading and trimming wire.
But best of all it produces beautiful welds, without stutter, I’m loving it.
Purchased in December 2021 for A$600.00.
Similar opinion? Write a review on ieatwords.com.au!
Find out how UNIMIG VIPER 182 KUMJRVM182 compares to other Welders
Know better, choose better.
LGWHCentral Highlands and Goldfields, VIC
Great home workshop welder.
The welder has done all that I have asked of it since I bought it. I, as yet, haven't tried the stick welder as the MIG is doing everything I need. As the title says, great home workshop welder.
Purchased in September 2021 at United Tools for A$700.00.
Similar opinion? Write a review on ieatwords.com.au!
phil r.Sydney, NSW
Cheap and nasty!!! Don't waste your money
The title says it all. Total waste of money. Built worse than the titanic. Cheap build quality from the flimsy parts to the loose screws holding it together. And the guide settings for material thickness was totally useless. It's more suited to being a kids toy than a proper welder.
Purchased in February 2021 for A$650.00.
4 comments
UNIMIGUNIMIG
Hi Phil, thanks for your 1 star review. Have you contacted any of our departments in order to rectify your issue? Like any product in the world things can happen, we will be more than willing to help you out.
That is extremely vague, "Any of your department's?" After mistakenly buying a lemon why would I bother wasting more time on it? Instead I went out and bought myself a Lincoln Electric unit which was ... Read more
so much better quality that I don't have the words to describe it. All the unimig unit amounted to was a tax write off. I will stick with the name brands that are respected worldwide. When I get a chance I'll throw the unimig, that I only used 10 very disappointing times by the way, out for Council cleanup.UNIMIGUNIMIG
Hi Phil,
We have the largest local service team of any welding company in Australia. It is rare for our machines to have issues such as yours, and we are more than willing to take a look at it. Howeve... Read more
Similar opinion? Write a review on ieatwords.com.au!
BobGreater Melbourne (Outer), VIC
- 2 reviews
Mighty little machine
Great welder it took me about an hour or so to get the settings for the different metals just right but now Im welding everything from thin tubings to 10-15 mm steel. I highly recommend this welder for the home welder to the more experienced
Purchased at Hare & Forbes Machineryhouse.
1 comment
UNIMIGUNIMIG
Thanks for your recommendation, Bob!
Similar opinion? Write a review on ieatwords.com.au!
SpiderIllawarra, NSW
- 3 reviews
Great home welder
This viper is a great little home welder, I love the mig in particular, it was easy to set up following the instructions and after a little practise it performed very well. The stick welding side of this welder took some more practise and was a little more difficult to master, however much more acquainted now. The instructions were great and I believe the quality of the Unimig is also great. I would recommend to buy this unit (a friend already has !) . I got a good deal at Sydney Tools and the guys looked after me well. In hindsight, I would have purchased a better quality helmet, as it doesn't matter how good the welder is if you have trouble seeing the weld. Overall Unimig was a great purchase for me.
Purchased in September 2021 at Sydney Tools.
1 comment
UNIMIGUNIMIG
Thanks for your feedback, Spider!
Similar opinion? Write a review on ieatwords.com.au!
Fantastic welder.
Bought from Nubco Launceston. Welds everything from .6mm steel through to 10mm with no problems, no overheating whatsoever. Used with gas and gasless wires but prefer gas. Stick welding is good, but find it a little hard to start somtimes. Puts good size filets down no worries. Being a retired Boilermaker makes it easy to use.
Purchased in December 2021 at Nubco Launceston for A$649.00.
1 comment
UNIMIGUNIMIG
Thanks for your feedback Alan!
Similar opinion? Write a review on ieatwords.com.au!
top backyard mig
this is my 2nd vipre, had a bit of trouble, no 9mm wire wheel available for gas a but i use 8ml wire works great fot the money its out classes other mig in the same category and price, i cannot kill this mig never has a duty failure excellent product and need be will buy again. bought from ADG welding at st. marys and the staff there are excellent and alway willing to help in any way.. dave law...mt druitt
Purchased in September 2021 at adg st marys for A$545.00.
2 comments
UNIMIGUNIMIG
Hi Dave, thanks for your feedback! In regards to the 9mm wire wheel, if you'd like to send us a message at [email protected] we can help you find the correct part.
ty will do after christmas not welding again till then, will get the number off the wheel, and all other info ty for your response..merry christmas to all at unimig keep up with the great products i l... Read more
uv em also have a unimig nail gun and has never failed me..regardsSimilar opinion? Write a review on ieatwords.com.au!
Find out how UNIMIG VIPER 182 KUMJRVM182 compares to other Welders
Know better, choose better.
JohnoRichmond-Tweed, NSW
Cannot fault this welder
This is a great multipurpose welder for a very reasonable price. I think the duty cycle is understated by Unimig as I have welded for decent periods with no problems.The best part is the 10amp plug and with a long lead the inverter welder will burn 3.2 rods no problem right up the backyard.I use the .9 flux cored wire and have no probs with 1.6 shs. I wish I had gotten one sooner. Johno
Purchased in July 2021 for A$539.00.
1 comment
UNIMIGUNIMIG
Hi Johno, we're glad to hear you're loving your machine!
Similar opinion? Write a review on ieatwords.com.au!
cheap, welds ok, service lousy
purchase 3 years ago stopped working returned for repairs unimig service n.s.w, they lost my hand piece, very hard to get in contact with and do not answer emails,, spend the extra dollars buy better, old telwin lasted 10 years hard work, don't recommend
Purchased for A$600.00.
2 comments
UNIMIGUNIMIG
Hi Donald, we're sorry to hear about your experience. Can you please send an email to [email protected] and we will sort this out for you.
Hand piece finally turned up welds better than when it was new so must have lemon from the start so with cost of repairs and freight I could have brought better
Similar opinion? Write a review on ieatwords.com.au!
Excellent little welder
Ive had the 182 viper for 18 months.
I ran gasless for 6 months and was very happy with the outcome.
I then got gas and this little welder is now comparable to much much larger and more expensive welders that ive used.
The duty cycle is only 10% at 180 amps.... i beleive this means 6 mins per hour..
Although this sounds like not much welding time i dont often run it at max power and it has never shutdown for cooldown.
I love this welder..
Purchased in November 2021 for A$530.00.
Similar opinion? Write a review on ieatwords.com.au!
JimBrisbane
- 2 reviews
Best in class
I purchased the Unimig Viper Inverter 180 amp MIG / MMA Welder from Get Tools Direct one month ago. I experienced no problems through out the purchase and received prompt delivery of the goods.
I have been using the welder consistently at my home workshop over the last month with no issues. I am a trade qualified diesel mechanic and I am use to using far more expensive, although industrial purposed welders. I found this machine comparable in desired outcomes and quality of work. The machine has been built well and I am of the opinion it will...Read more
last a long time with home / light commercial use. It is important to note that the supporting instruction manual is well written and provides not only important information in machine set up, but gives correct advise in producing welds. I have the machine currently setup for gasless 0.8mm wire, however all the required roller guides have been supplied to allow the user to switch between different wire sizes and shielding options. I have no issues recommending this welder to both family and friends. Jim CaswellSimilar opinion? Write a review on ieatwords.com.au!
Questions & Answers
Thomasasked
Will this run on standard residential power without blowing a fuse
2 answers
UNIMIGUNIMIG
Hi Thomas, yes this machine is designed for home use so no need to worry about blowing any fuses.
Easily runs off a ten amp outlet, this machine is a cracker, just beautiful to use
Belcomasked
What connection is required for a tig torch ? and what is the part number for the knurled feed roller for flux cored wire,
thanks
1 answer
UNIMIGUNIMIG
The VIPER 182 will only do Scratch Start TIG and as a result, the 17V TIG Torch is what you'd be after (Part number: 17V-4MCP50). With the roller, the size is 30/10 and an F Groove. The part number will vary depending on the wire size you are running.
kjjasked
Is it safe to purge the gas line, for storage, after completing welding similar to purging oxy/acet gas lines.
ieatwords.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ieatwords.com.au may earn commissions for products/services purchased via affiliate links.
UNIMIGUNIMIG
Thanks Pauly, happy welding mate!!