- Sign in
- Write a review
Aqua Systems Wireless Weather Station Questions & Answers
38 questions from our users
How to get the sender unit to connect with the inside receiver unit aqua wireless unit
Did you get an instruction sheet when you purchased it? Once the batteries are installed on the outside and inside units it should automatically connect. If the outdoor temperature is not displayed, press CHANNEL until the number 1 appears below the OUTDOOR CH icon. Make sure the outdoor channel is set to CH1 before hanging it up.
How do I set the date month and day display
Press Time and hold for 2 seconds, and when the numbers start flashing use Up or Down to get the correct time, date and month and day and year display. After each setting press Time to set it, then continue on. It looks confusing but keep trying. Otherwise get a young 8 year old or younger relative to do it for you. When the batteries flatten you have to do it all again so you may as well have a go now... Good luck!
I have set up the correct year, date and time as well as Channel 1 on both indoor and outdoor units, but there is no reading of outdoor temperature on either just HH.H and humidity ready is there. Can anyone help because this is a function that I think is significant.
My outdoor unit while showing the temp etc has stopped sending to the indoor unit. Batteries changed and channels checked.
How do I set the year. I've scrolled through but no year appears? Date is set correctly but the day is wrong so obviously somewhere the year is wrong.
How do I turn off the alarm permanently ?
Just bought it. Works well so far. Can’t get year set up though, even though I’ve done as they asked. I set ‘day’ to EN (English) but it won’t stay on EN, even after I’ve pressed ‘time’ to set it. At least temps. Are both on there.
How do you set the day and date on the Aqua wireless station? I have set up everything else following the sheet that was included in the package, but there are no instructions for this last step. Any advice would be gratefully received.
Hold time fir 2 seconds. It’ll flash fir each step of time. Then you’ll notice date section flashes (After 4 pressings of ‘time’). Press ‘time’ fir each step. I found ‘day’, which states language, won’t stay on EN for English though. Plus trying to get ‘year’ wouldn’t work either, which just stays as seconds.
How do you set up the weather station?
where would be best place to mount outdoor sensor ?
Thanks to last reviewer I changed chanels on both units to get outside gauge working.
My inside temperature showing probably 5 degrees hotter than it is. Any thoughts?
Mine did that at first. But after letting it sit for a while, the temp came down to normal.
How do I increase darkness for display info, or is there a way to get backlit on background?
Does anyone know where you can buy additional sensors? Searched online but cannot find any??
As previous enquiry. Is there any way to change the day as this is not the right day for the date - 2 days difference.
You probably have the incorrect year set. Are you you still having problems?
It does not say where I can put the outdoor sensor.
in the shade somewhere fairly close. I have mine about 2 meters away hanging so it doesn't get the heat off of what I have mounted it on
Just setting up my unit and find that the day is incorrect for the date. Does this depend on the time zone and if so how do you re-set the time zone please.
It doesn't depend on the time zone, the day of a date is the same anywhere in the world. But is your year correct?
There is no mention of what the CHANELS are for or how you use them. I want to set the date/month/year... but how
Channels are for the outdoor unit to 'speak to the indoor one. Make sure they are on the same channel, and then hold the channel button down to activate. To set the day/month/year, hold the time button down till the 'hour flashes and use the up/down button to select. Then press the time button again to go through and set the minute, date, year etc...
It won’t let me set year
Can someone tell me please how I change my indoor unit from F to C?
Do you have a user manual for the aqua systems wireless weather station. Cant find it on line anymore: very frustrating!!
I have the two sensors in the same room, but they are showing a difference in humidity of 5%. They have been in that same room next to each other for over 30 mins. I'm not sure that this feature is very accurate. The temperature reading is also off by about 1.1 degrees but that's manageable I guess.
Get an answer from our members
Other Garden Tools
ieatwords.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ieatwords.com.au may earn commissions for products/services purchased via affiliate links.