Hills Garden Sprayer Questions & Answers
- ✓ Verified company
Can I get a repair kit for the Hills Garden Sprayer, 1 Litre. I have 3 now that won't pump up, I might go to the bigger sprayer, if none available, as it looks like they are available. Thank You, Susy.
Good Morning Susy,
Thank you for taking the time to review our product, however I am sorry to hear you are having problems with your purchase. Please contact our friendly customer service team on 1300 327 293 or alternatively email us at [email protected] and we will try and assist in resolving this issue for you.
Kind Regards,
Hills Customer Service
Hi there, how do you attach the lance? When I insert it and tighten the screw it still just falls right out and spray goes everywhere. I have read manual many times and even tried forcing the lance piece in hoping it would lock into place but it doesn’t and keeps falling out.
It’s a crap product get your money back and buy a different brand
Good Morning Tim,
Thank you for taking the time to review our product, however, I am sorry to hear you are having problems with your purchase. Please contact our friendly customer service team on 1300 327 293 or alternatively email us at [email protected] and we will try and assist in resolving this issue for you.
Kind Regards,
Hills Customer Service
I have a 16l backpack sprayer. It wont stop spraying when I release the trigger. Have pulled it apart and is leaking everywhere now. It would be useful to a have a youtube video on how to fix these things but don't seem to be available. Have contacted Hills but they don't seem to have a spare trigger handles. Was told to buy a generic one or speak to a hardware repair service person. Bunnings/Mitre10 don't have these spare parts and don't service units. Anyone out there able to help before I toss it into landfill and buy a different brand?
How do you attach the wond to the handle? It just falls out and spray goes everywhere? Brand new but brought just before winter and only using now. Don’t have old receipt. Please tell me it’s an easy fix
Hello fellow Aussie. Here is a link to the assembly instructions. Be sure before you start that you go gently on the plastic threads. I hope this helps. Kind Regards.
https://www.hillshome.com.au/wp-content/uploads/2021/02/455644_HH2358_4L_5L_7L_8L_Pressure_Manual_PRINT.pdf
Good Afternoon Britt,
Thank you for taking the time to review our product. I would recommend contacting our friendly customer service team through our email [email protected]. If you could send us through a photo of the lance and the connecting pieces you have. From their we can review the setup to confirm everything is there and correct. If it is not we can find a resolution to get the unit working.
Also thank you 'Aussie Consumer' for providing that extra advice.
Many Thanks,
Hills Customer Service
Thanks, I can’t attach photos of what came Inside the box on here. Have you got an email?
Hi there, how did you fix it? Having the exact same problem where the lance/wand just falls right out
Took back it was missing a piece so they gave me a whole new one. No trouble with new one :)
How do you unblock the nozzle on the sprayer
Hi Ros, I’ve cleared blockage by removing the actual nozzle then ensuring you’ve got pressure, press the discharge to clear the pipe then put the nozzle back on to your desired output. I can’t say that I’ve ever had the actual nozzle itself blocking before but if it did I’d be inclined to rinse it and blow it out backwards with breath. I hope this helps.
Good Afternoon Ros,
Thank you for contacting us. We recommend to remove the nozzle and disassembly the nozzle assembly to be able to rinse them thoroughly. We recommend to use warm water to help loosen any debris that may be causing the blockage. If we can help with anything else, please contact our friendly customer service team on 1300 327 293 or alternatively email us at [email protected]
Many Thanks,
Hills Customer Service
Sometimes when I spray sulphur or copper powder dissolved in water, I get a gel like build up on filter.
I simply remove mesh filter and hold it under warm running water whilst scrubbing it with a toothbrush
Works a treat.
To avoid bbuild up, always run fresh clean water through system every time you finish with your spraying.
The centre part of the actual pump part that goes inside the bottle has come disconnect at the bottom (internal) when I pulled the handle to do the pump action. How do I reconnect pls… :-)
Good Morning,
Thank you for taking the time to review our product, however I am sorry to hear you are having problems with your purchase. Please contact our friendly customer service team on 1300 327 293 or alternatively email us at [email protected] and we will try and assist in resolving this issue for you.
Kind Regards,
Hills Customer Service
Hill garden spray valve non stop. How do I fix it
The same thing has happened to mine which is a recent purchase. However I can't find the receit. So I need a fix.
This sounds like a common problem.
Hi There
Where do I parts for the Hills Garden Pressure Sprayer, I need the musroom valve and the plunger washer?
How can I get container cap off cannot remove it.
It is the 5ltr container
I have the 8ltr one and have never had this problem [D Tuckwell] the only thing i have had is the srayer the washes wear out from the chemicals They told me when i rang to see if you can buy the accessories that they should have all the accessories to buy this year some time But the only thing i can suggest is ring them up they have a 13000 no You have made sure the air is out haven't you?
Please help. The wand drips & refuses to spray !
Have Hills 5Lt sprayer and the sprayer handle wont switch off. As pumping air into sprayer the water comes out the nozzle Lance and you can place the switch in any position and it wont stop water from spraying. Would it be the plunger assembly (298) in the handle or perhaps the (313) pump valve at bottom of pump barrel. I replaced seals in handle but couldn't get the plunger out- is there a secret in this as maybe the problem.
Valve that controls pressure is leaking. It won't hold the pressure. How do I stop the leak??
I just bought a Hills pressure garden sprayer. I WOULD like to USE it !!!
I can't get it open to put in the spray !
Found a site that said "turn it counterclockwise...it will be hard...but just continue till it opens"
Well this one is NOT opening...any hints please ?
try filling the laundry tub with hot water then dunking it in, holding it {the pump section] upside down for about 10 minutes until the plastic is hot, try, by hand [turning counter clockwise] if that doesn't work get a friend to hold it and use multi-grips or Stiltons to unscrew it, good luck!!
Hubby had no problems with this part of the unit. If you haven't already opened it, recommend you take it make to your supplier for assistance or refund. We have changed to Solo! Good luck
Can anyone suggest a better brand?
I bought another from America. Hey if Australia WON'T make one that is good, then I go to where they do! http://www.amazon.com/418-One-Hand-Pressure-Sprayer-1-Liter/dp/B000BX4VXI/ref=sr_1_7?ie=UTF8&qid=1445503063&sr=8-7&keywords=garden+spray
Have only used it a few times, it's good.
I used the (new) 4 litre Hills Garden spray a couple of months ago, cleaned it and put it away for another day. That day has come and now I can't get the thing to work. Took off the brass end and tried to clean that but not sure what else to do. Don't know what that green button is for underneath the wand but it must have some sort of use? Can anyone help please before I have to buy yet another spray?
Get an answer from our members and Hills representatives
Extra Information
ieatwords.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ieatwords.com.au may earn commissions for products/services purchased via affiliate links.