Miele G 6620 Questions & Answers

Do you use finish tabs, rinse aid and dishwasher cleaner? How does it compare to the Miele brand?

We get frequent power outages. When the power came back on, our old Miele dishwasher would resume operating from the point where it was when the power went off and just complete the cycle. The new 6620 just stops in its tracks. When the power resumes, the dishwasher is just sitting there and the cycle needs to be started all over again. This is a concern to me as we only have tank water and we need to be very careful with the amount of water we use. Added to this is the extra power and detergent used to wash the load all over again. Why did Miele change the system used in the old dishwasher? It seems a very retrograde step and certainly not very environmentally friendly. Is there any way around this?

Does the machine automatically come with any type of steam guard for under the bench? Do I really need to buy the "UBS G 60-1 Dishwasher built-under kit"?

Also, if I turn off the Auto open feature, will the fan alone dry the glassware and dishes well enough?

Where is this product made? Thanks

I have been used the MIELE G6620 for 12month but when I use the machine by normal mode(include eco, auto sensing and etc), which means not in short course, the display indicates it remains 3.5 hour to get it done. But the door opens when time remains more than 1 hour. So I mean, the display does not show the exact remaining time. In this case, I wonder it is okay or need to get repair? Thanks.

We have had this Miele for around 4 years. In the last two days, we have had a whirring noise for the last 10 mins of the short power cycle (which is the one we use all the time). No error lights or error codes are coming on. I have checked the filter, non return valve, drain pump and impeller. It is draining okay. I have run it empty with a dishwasher cleaner. The noise is louder and different than the hum of the dishwasher working and appears to be coming from the motor at the bottom. Any guidance would be greatly appreciated.

I have had this dishwasher for 2 weeks replacing an old Miele which provided many years of completely reliable quiet service. The new one operates perfectly satisfactory except it is noisy. There is a thumping noise at about 120 thumps per minute for part of each phase of the cycle. The thumping is present when operating the washer completely empty. Is this normal? I have a recording of the noise

Hi, my new Miele is great but I would love some advice on how to adjust the door springs as the door falls down as you open it unless I hold it. The manual says door springs should hold the door at 45 degrees when you open but not how to adjust. Online videos only seem to be for older/different models.
Thanks
Verna

Hi, I would like to know the difference between the 6620i and the6720i
Thanks
Rob

Hi. May I know how long each progranme lasts (drying included)
Also, does it have any leak proof technology (whether leak from machine or water inlet)?

Thank you!

My machine is brand new & it wont drain. It can't have any forign objects clogging because it hasn't done a wash yet.
Its replacing another miele so we know the plumbing suits a miele.
Iv'e removed the filter. But cant remove a part that has a ball bearing in it.
I cant find a u tube video on this model.
Any suggestions?
Thanks

Does it have pre wash ?

I am after the under bench model. My bench space below is only 600mm wide. Is the 600mm width sufficient width for this model - the G6620 scu clst?
Thanks.