Fisher & Paykel Top Load GW512 / GW612 / GW712 Questions & Answers

How to find replacement parts list?

I have a GW612 which has worked ok for many years. It now has a fault where it stops after the wash and does not drain. The error code indicates a pump fault. I stripped it and found no problem. The machine will complete the wash by manually overriding the controls (turning off then on again and skipping the phases to spin). So there is no problem with the mechanical side of the machine. Can someone suggest a solution??

How do I remove fear panel of model GW712 to replace outlet water hose

I have one of these wash machines and the buttons just keep nipping and I can get it to wash or spin

Changed the pump control panel .machine washes but wont get through the first cycle and drains out but not apin GW712

I have had this machine for 10 years first bit of trouble spin cycle has stopped any ideas of the problem to fix it

Can you please tell me when my GW712 washing machine serial number BYN627844 was manufactured

Hi. Fisher & Paykel GW712 Not rinsing and when it's draining water out, stopping a few times, but still not draining all and having some strange smell while draining. It starts beeping on the three last lights. Any ideas what could be wrong?

Hi I have an f and p gw612 it wont agitate or spin but drains, the lip doesnt lock, I think I have it in dianostic mode and next to long wash first light is orange, the 5 light is yellow by short wash, what does this mean, can I fix it?

How do I restore factory settings on my machine?

Height of machine with lid open

how to replace the electronic control panel on a GW512 fisher and paky washing machine

I have this model machine. In the last 2 months it’s becoming unbalanced along to the point it’s getting a lot frustrating. Even putting clothes in before wash all even for the weight and then next minute when it’s on spin it goes BOOM BOOm kos it’s sounds unbalanced so I have to take all the clothes out to even then out again and then it’s good to go. Does anyone know what may be wrong because other than th last 2 months it had never done this.

Hot water intake hose side??

what year was this machine manufactured

The machine will only use hot water even if I select cold water wash

My Top Loader GW712 has started to leave smudge marks on the washing and now the cold water does not go into the washing machine although it is coming through the hose when checked. Is it time for a new machine or can it be repaired?

fixing new drain hose

Does the GW712 have a lint filter that the owner must clean. If it does where is it located ?

My GW612 overflows, what causes this?
Rob