Read also:
kleva range sumo slicer reviews kmart 3 in 1 air fryer archer gas log fire not starting zigler and brown bbq review target 11 fin oil column heater how long does cash train take to approveRobinhood RLES61
RLES61SS (Stainless Steel), RLES61WH (white)PaulaWide Bay-Burnett, QLD
Useless frustrating appliance. DO NOT BUY ROBINHOOD
Plastic around screws disintegrates and now have a piece of plastic broken off around screws and wonder if grease being pulled up into appliance... extremely hard to remove filters for cleaning. No clips to loose them off . Just too difficult a product to manage. Will definitely consider another brand with simpler operation.
4 comments
Hi yes thank you, the service agent was here yesterday and took photo and was going to send a report to you about the rangehood. Will wait to hear from him. Paula
Alexis P.Robinhood
Hi there Paula, so happy we were able to reach a satisfactory outcome for you.
The team at Robinhood.
Similar opinion? Write a review on ieatwords.com.au!
MariejeanneCentral Highlands and Goldfields, VIC
- 4 reviews
Replacement product under review
I have had 2 Robinhood rangehoods. Both had the same problem others have posted about on this site.
After posting a review about my Robinhood slide out range hood problems, i have been contacted hy a Robinhood representative who has offered to replace my broken one with a new improved model.
will report my findings on it.
Very professional approach to this problem.
Thanks to Alexy from Robinhood for the replacement.
2 comments
The first replacement arrived DOA.No lights..no power to it at all.
Checked by electrician. The Robinhood rep sent yet another replacement for the replacement!
But having had this one in for a few ye... Read more
Alexis P.Robinhood
Hi there Mariejeanne, thanks for the feedback we will pass your valuable comments on to our marketing department.
The team at Robinhood.
Similar opinion? Write a review on ieatwords.com.au!
NellNarooma
Just the worst
After 3 years the plastic holding the screws fell apart and the unit collapsed onto our cook top. I thought it was weird that the plastic was the only thing holding the screws and put it down to bad installation by the electrician at the time..... so ( silly me) I went out and bought the same one again thinking we would install it properly and would fit in the custom made spot etc etc.... Little did we know that the manufacturer expected you to screw the blunt screws into brittle hard plastic and expect this to hold the unit.... this just did ...Read more
not work... so we had to re design the installation we used super glue, tape and bolted the unit to the shelf from below... we also drilled/ cut out the plastic tabs... and replaced with washers, big bolts and nuts... what a waste of a Saturday.... next time I will remodel the kitchen just to avoid having to buy this model again... I should have read the reviews on this site earlier... but you live and learn :)Similar opinion? Write a review on ieatwords.com.au!
Find out how Robinhood RLES61 compares to other Range Hoods
Know better, choose better.
ClementsonsPerth WA
- 8 reviews
- 4 likes
This is our third one
We have had 3 of these units burn out in 4 years! No problems with wiring. Just a terrible unit with continual problems. Our electricians say its too unecomonical to repair so they have replaced it with a new one. And they keep burning out. Stay clear of this at all costs!!!
Similar opinion? Write a review on ieatwords.com.au!
BeeBee
- 2 reviews
- 3 likes
Horrifying.
After a few months of use, the plastic holding the screws in just crumbled and broke off. It didn't snap, it wasn't mistreated - the plastic simply crumbled like sand and fell apart. This is a new build kitchen, and has not even been used for 4 months, and the manufacturer has suggested that we broke it on purpose and that he has never had this problem before. Looking at other reviews of this product, that is hard to believe.
This is a defective product, and the quality of manufacturing materials is absolute rubbish. Don't waste your time or money!!
Similar opinion? Write a review on ieatwords.com.au!
Absolute Rubbish
The plastic around the front self tapping screws broke. Was about 1 week out of warranty and I contacted the distributor who requested full details which I supplied with photos and after three emails no reply at all. E mailed Robin Hood on their web site which was also a complete waste of time as no reply from them. Customer relations of the manufacturer and the distributor are as poor as their product.
Similar opinion? Write a review on ieatwords.com.au!
Steve
- 17 reviews
- 8 likes
Ugh. This range-hood sucks, and not in a good way
As others have noted, this model has a major design flaw where the self-tapping screws weaken the plastic frame, so the entire thing just falls off the wall. This has happened twice - the first time they fixed it under warranty, this time I'm chucking it in the bin and buying something decent.
Oh, and even when it's not broken, it doesn't do anything. Our fire alarm goes off pretty much every time we cook.
Similar opinion? Write a review on ieatwords.com.au!
- RLES61SS (Stainless Steel)
- Verified purchase
Highly disappointed
Like others, I had to buy a replacement, as the self-tapping screws broke through the plastic fascia. Now the second one has broken in the same way after only a year, which means, theoretically, it is still under warranty. Let's see if the company will replace it or return my money.
Similar opinion? Write a review on ieatwords.com.au!
Ace
- 2 reviews
Terrible
I have had to buy two Robin 600mm slideout range hoods now because they keep breaking when the plastic around the front self tapping screws gives way which cases the slideout part just to hangdown until it eventually breaks off. Pretty disappointed in what should be a reputable brand. Now looking to buy alternate brand.
Similar opinion? Write a review on ieatwords.com.au!
Find out how Robinhood RLES61 compares to other Range Hoods
Know better, choose better.
ausmartinAU
- 3 reviews
- 10 likes
Cheap nasty Fan motor with EXTREMELY HIGH EMF (Magnetic Field)
Hi Magnetic Field in use - does not meet guide lines for EMF (No way this unit could be sold in Europe as it doesn't meet guide lines)
This the WORST ELECTRIC MOTOR UNIT I've tested with hand held EMF meter along with RLES91SS/WH and their WH versions for radiating Magnetic Fields.
It actually maxes the Magnetic Field meter out !
I tested this at Harvey Norman and compared it to other models including sister cheap brand Omega from the same Australian Distributor.
RLES61SS / RLES61WH & RLES91SS / RLES91WH along with the newer cheaper 2 speed units.
Should be recalled and replacement motors offered to existing customers.
...Read more
Similar opinion? Write a review on ieatwords.com.au!
Terrible product
I have had 2 of these robinhood rangehoods installed at our place (2014) and both times have had the unit collapse because the self tapping screws holding the appliance together have caved in and broken. The plastic mould that holds this together aswell has also given in. Overall a very faulty product and manufacturer will not accept responsibility for the flimsy design.
Self tapping screws holding the appliance together have caved in and broken
Similar opinion? Write a review on ieatwords.com.au!
Fit for the tip
As it is noisy, has low extraction performance and only 1 light works it almost does not qualify to be called a rangehood. If purchasing the SS version the appliance is white with a SS fascia only. Many of the self tapping screws holding the appliance together have fallen out.
It can be recycled
Similar opinion? Write a review on ieatwords.com.au!
adohr08
- 14 reviews
Does the job
This is a neat slideout rangehood that can be recirculating or ducted. It is priced well and has very good downlights. Not whisper quiet but reasonable noise level and works well. We installed it in ducting mode but were surprised to find that it still recirculated the air through slots in the front of the unit when in use so everytime I opened the cupboard doors above the stove, air would blow out and hit me in the face! My husband has now put a metal fascia across these holes to make sure the air goes up the ducting tube. My mother also ha...Read more
s a Robinhood rangehood model and had the same problem. She put masking tape over the holes! I think Robinhood need to supply a panel to correct this issue. Good price... Air flow recirculating instead of ducting...1 comment
Update: The filters have a tendancy to fill up with water and then water droplets fall onto your hotplate when boiling potatoes, pasta or making soup. Very annoying. The noise level from the fan is... Read more
also very loud on any setting above 1. You can't hear people talk or the tv if cooking with the fan on these settings.Similar opinion? Write a review on ieatwords.com.au!
Questions & Answers
Dawn W.asked
how do you remove the filters to clean them
2 answers
Push the front one backwards then pull into the gap forwards.
Then remove the back filter the same way.
Easy when you know how!
The dishwasher does a great job of cleaning the filters.
Alexis P.Robinhood
Hi there, please follow the directions given to you by Mariejeanne. If you continue to have a problem please call us on 1300 739 033 and one of our friendly team will assist you. The team at Robinhood.
trekor2asked
How to remove the fan cover on a Robinhood Ventro rangehood
1 answer
Alexis P.Robinhood
Please contact our fabulous customer care team on 1300 739 033, they will be able to assist you with your enquiry.
The team at Robinhood.
ieatwords.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ieatwords.com.au may earn commissions for products/services purchased via affiliate links.
Alexis P.Robinhood
Good morning Paula, as advised our customer service team logged a warranty service call to assist with the removal of the filters after discussion with you on Wednesday. Please advise if this has not been done.