Read also:
latitude infinity visa card login safe n sound unity capsule compatible prams how to clean fisher and paykel washing machine filter kleenex viva glass & mirror wipes i-vac x10 handstick reviews chefs toolbox pressure cooker reviewsUNIMIG RAZOR 200 KUM-M-RWMIG200
Great welder
Great welding machine for Aluminium with 5356. Short 2m lead and gun. Plenty of punch for a small unit. Gives a good professional finish. With great penetration. Light weight and very portable
Purchased in November 2021 for A$1,000.00.
1 comment
Similar opinion? Write a review on ieatwords.com.au!
GeorgeDarwin
- 5 reviews
Bloody ripper!
Awesome unit, like the guy below me I used to have a cigweld and was a massive cigweld only guy until their new units started to give me nothing but headaches. I had seen Unimig popping up online a lot and went out on a leg to give them a go after some conversations with my mates who were familiar with their products. I have to say I am impressed! From opening the box I could tell the torch & machine was built with quality clearly in mind, and the welds it were producing were far superior then many other machines I had tried in the pass. I have to say I will have no more hesitation in buying these companies products in the near future and would recommend anyone who isn't sure what company to pick for quality and reliability to choose unimig
Similar opinion? Write a review on ieatwords.com.au!
It's good actually bloody good
Got rid of my 175it over rated got a old 150 cig 10 years still works good .then though I would look for a different brand looked at all of them tried a few of my mates then tried a older unimig sold worked very good so went out a got a unimg200 mig mma used it twice so far dose every thing I want so easy to use it's eveyones personal choice but won't think will have to buy other for a very long time would be good if a spool gun came with it but carnt have it all HAPPY WELDING.
Similar opinion? Write a review on ieatwords.com.au!
Find out how UNIMIG RAZOR 200 KUM-M-RWMIG200 compares to other Welders
Know better, choose better.
NOT GOOD!!!
Needed a new onsite welder. went to the store and thought Id try the UNIMIG.. Years ago they had a reputation as being junk and unreliable. Recently id heard they had lifted there game and become a good welder. I bought a Razor 200 Mig welder. Within a year it started playing up. Wire speed wouldnt vary and the weld starts were pathetic. I couldnt afford not having a welder for onsite stuff. |So i put it in to be fixed . My mistake was i thought this must be just a one off dud..So to keep things uniform and interchangable i went and bought a se...Read more
cond Unimig 200. The job needed doing and i thought hey be good to have a stand by..this welder last 2 months and dead shorted blowing the safety switch.. UNMIG!!! Never again.They aint improved since the old days, my opinion is they a still Junk,,Both welders are in the shop for the secong time as the back service is also crap..they gave both welders back to me and did nothing..Still has earth leakage and the other still farts and splutters on every weld start...Yes im going out to spend a little extar and grab a GOOD brand... Well thats my experience with UNIJUNK...hope yours is better..CheersSimilar opinion? Write a review on ieatwords.com.au!
d wGoonengerry
- 5 reviews
Nice machine
Does a great job wth gasless mig. Just knocked up a set of gates. I couldn't be happier. Can't wait till gas becomes cheaper. Pretty hopeless striking an arc with stick welding. Tap Tap tap, if you know what I mean. I think the stick function is to make it more appealing to sell. Disappointed with that side of it.
Similar opinion? Write a review on ieatwords.com.au!
RickOMetropolitan Adelaide, SA
- 31 reviews
Why didn't I get one sooner
A new toy. A UniMig RazorWeld MIG-MMA 200. Why did I persist with my old stick only welder for so long.
Here is my story - $6000+ tubular fence quotes - not happy. Purchased this welder (stick and Mig only - but with spool gun connection) with a good auto darkening shield, a 4.5kg roll of flux core wire and all the material for $3500 including installation costs and paint. When the job is finished the fence will only have cost about $2000, then ready to make a flat top tray for my RTV Style-side ute (backed into something and buggered it) and...Read more
Similar opinion? Write a review on ieatwords.com.au!
Questions & Answers
Billasked
razor weld 200 stick - tig welder powers on for about 20 seconds the code E-2 appears then unit shuts down. then repeatedly powers on and off
2 answers
UNIMIGUNIMIG
Hi Bill, please contact our Service Department through our contact page, and they will be able to assist you with this:
Contact UNI MIG
Rodasked
Does anyone know what error 1 means?
1 answer
Hi Rod, is there anything in your user manual? If theres still nothing just call up unimig’s service department they have helped me out numerous times!
nuggetasked
got195 unimig the wire pulsates and wont run a weld any answers?
3 answers
it sounds like the pressure on the rollers is not tight enough and/or the wire roll is binding
Check - Wire diameter matches grooves on Drive Rollers and no grease/oil on roller surfaces - Bearings in Feed Rollers are not worn out - Kink in Wire feed guide from welder to weld tip - Adjust roller pressure (mine has a knob to wind down to increase roller pressure) - Weld spatter on or inside output weld tip and matching diameter of tip for wire - Any loose/frayed wiring connection in weld gun handle or at connection to welder - check wire off roll has not spooled out behind and rubbing on inside housing. Other than that your drive/control card might be caput.
checked all those board might need replacing took it awelder repair man thanks for your comments
ieatwords.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ieatwords.com.au may earn commissions for products/services purchased via affiliate links.
UNIMIGUNIMIG
Thanks for your feedback, Rob!