Read also:
vip natures goodness grain free kogan 48 led tv review slim right shakes do they work aldi slim and trim shakes ryobi electric blower vac review lg 515l top mount fridge review taav vaporaire steam vaporizer instructionsFisher & Paykel WashSmart WA80T65GW1 (8kg) Questions & Answers
81 questions from our users
S.Macasked
Switched machine on, first was light flashes but machine will not start when start button is pressed. Delay time light is not on.
No answers
Ronasked
Lid lock wont lock
No answers
Fiona T.asked
My machine is almost 7 years old and it wont turn on I have had feedback that I need to replace the computer however this is expensive and Im wondering if its worth fixing
Fiona T.asked
Is it worth fixing this machine if its the computer that needs replacing
No answers
Helpasked
My machine is consistently off balance doesn’t matter how much is in it. It shakes and bangs then stops on just about every load
No answers
Paul E.asked
When switch on the wall is in the ON position machine is making a noise like it's trying to drain water. Power is not ON on the machine itself.
The machine turns ON like normal with the SOUND still going.
When I start a cycle it drains water as it's filling up.
Is this a major fix?
No answers
Serena Parrasked
My machine just clunks
Wont spin or lid lock
Thank you
No answers
Peter M.asked
I would like to remove drain outlet hose from the machine to replace with a longer one. Seems a little complicated Peter
1 answer
We have connected a hose which we bought from Bunnings onto the washing machine hose so we can water our plants, why waste any water. The hose addition is about 10 mts long, works great no problems with our washing machine, plants love it, machine is 6 yrs old.
Megan F.asked
we've just moved and it doesn't run the same; can the drum come off? are there brackets that the drum should be connected to?
Thanks
No answers
Nikki D.asked
washes and drains as per normal but won't spin, just hums and thumps a little. I have removed agitator, everything looks normal
No answers
Kylieasked
Why has my sofy close lid suddenly stopped working? Now it just slams down help please
No answers
Internet Shopperasked
machine runs ok but stopsat end of wash cycle and will not progress further unless manually advanced to next progress point. once progressed it runns normally to next progress point,then stops again until manually progresses.is it an easy fix or is it a new machine?
please advise as we are some 900 km from perth wa
thanks
No answers
Glen S.asked
Have a watersmart f&p 10 kg wash top load WA 1068 G1, 5:5 years old, and it gets to rinse and spin and it bangs and clatters and shakes. Keeps going beep with a message of some sort .
Re arrange the load and sometimes it’s ok other times it just keeps doing the same thing. Read it may be stabiliser rods.
No answers
Leeasked
Our washing machine has sprayed water from the top rear of the machine.
I’m not sure from which part of the cycle it occurred.
I was washing a load of towels on a warm/hot cycle.
It appears the water was coming from the rear of the machine from where there is like a small flap cover just above the drain hose. When facing the machine, it’s the top right hand side. Has anyone else had this problem?
No answers
Vicki A.asked
On pressing start it fills with water but then when it goes into the wash cycle you can hear a knock as the agitator goes backwards and forwards but not travel the full motion..
Empties and spins
No answers
Sarah C.asked
I have one of these haven’t used for 13mths plugged in beeps continuously and won’t work
No answers
David H.asked
.Hi! I have found two part numbers for "Agitators" for Product # 92133-A. M1242948 and 425025P. My Question is----- Is one better than the other? My first one broke after 3 years, and I stiffened it but is now failed completely.
No answers
Nico.Nasked
Washing machine fills up right to the top what ever you select. The selector function correctly when selecting the amount of load but still fills to the top.
No answers
D Browneasked
I have one of these machines (approx 5 years old) has worked fine until today it stopped mid cycle and now won’t do anything at all, can’t get it to turn on or anything. I have tested the power supply from the socket using a multimeter and the connector to the controller, they both have 240V. Could it be a failed controller?
No answers
shane moodieasked
Too Full appears after wash cycle?
No answers
ieatwords.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ieatwords.com.au may earn commissions for products/services purchased via affiliate links.