Read also:
fisher and paykel wa8560g1 review pine discount quality furniture kenwick nan optipro ha gold 1 coles potenza re003 vs pilot sport 3 hoover regal premium bagless vacuum cleaner kogan pulse+ wellbeing tracker review little nation balance bike reviewTeac HDB850 Questions & Answers
152 questions from our users
Elaineasked
My recorded programmes keep stopping after 30mins on playback via usb
because no port has been connected please try again later have to connect in Port
No answers
Stuartasked
how do i select radio channels
1 answer
Press the OK button in the centre of the arrows and this will display the TV channels. Press the right hand arrow button and it will change to the radio channels.
JBDasked
Unit was showing 8 then 8888 now will not turn on at all I have unplugged a left it off for 20 minutes with out luck
Christian K.asked
how do i record from my beta video recorder to my hard drive on my Teac HDB850
3 answers
I don't believe that the TEAC has a hard drive!! I have only recorded from the TV to the TEAC via USB - I am not sure what you are trying to do??
i am trying to record to my harddrive through the teac with rca leads from my beta video player to teac to harddrive is it possible??
Sorry I don't know if this is possible. Contact TEAC support.
Victor B.asked
hi will a set top box hdb 850 remote work on a hdb 860 thanks
No answers
Statekasked
I have a HDB850 set top/PVR box. It has worked fine for some years but now keeps losing channels particularly 9 with the message "Invalid Channel". I have checked out the aerial feed and that is all good. The TV is not affected. My experience with other electronic devices is that quite often electrolytic capacitors in the power supply are leaky and/or have dropped capacity from when new. I opened the unit up and inspected the capacitors visually. They all appeared to be in good condition, no evidence of leakage or bulging. What else can I try. I would have just bought a replacement by apparently they are no longer available.
SJunasked
My Teac HDB850 has suddenly stopped working. There was power since yesterday and digital screen was showing 4 dots(lines). Someone suggested to turn it off for 20 mins and it will start work again but after 20 mins- there is no power now. Can someone suggest how will it work please?
Thanks
1 answer
Turn it off at the wall and remove the plug from the wall. Leave for 10 mins and then retry. I had a different problem (not power) and I contacted TEAC support and they were very helpful and resolved the issue.
Joan browneasked
Is this a satellite receiver
nassiasked
Set top box HDB850 . When USB connected it's only showing a folder with the letter C. Won't actually read any files?
No answers
Frank L.asked
Teac Model HDB850 wont tune into any Channel 7 channels.
All other channels are Ok.
I think it did tune in previously.
Has something changed at channel 7.
No answers
Kathy Masked
What does 7777 mean
No answers
Umbreydasked
Kazasked
Hi what co axils cord do you need to fit the digital set top box
No answers
Marilyn_Murrayasked
I have Teac Digital recorder HDR9650TS // 139003T62T03246 it locked some time ago with "BOOT" is there anything I can do to reboot this unit or is it just another through away. Regards Marilyn
Rhonda Sasked
My television has begun to have channels “drop out” for 2-3 minutes then come back on. It has been suggested it could be set top box causing the problem. Signal strength has been tested and all good.
2 answers
I have not had this problem but my stb did need some software upgrades soon after I purchased it. TEAC support did this for me.
Sounds more like a loose connection somewhere. Signal strength might be OK but if it's a poor cable joint that won't help. Maybe try new cables (they're very cheap)
LiOzasked
I have an HDB850 - have had it for years but think it needs a firmware update. I'm having a hard time finding the update and when I tried to click on the HDB850 download page my virus program suggested that the teac site is dangerous and the download page has URLs that are potectially harmful. Be grateful for any advice.
2 answers
Don't waste your time. No need for any updates for a simple set-top box. Only thing you will have to do is retune the stations occasionally as they are always changing.
Rather than do a rescan, do a factory reset. If you do still need the Firmware contact [email protected] with the request and I'll send it to you. I am the Account Manager for TEAC Warranties
Rod kasked
I've turned a 850 hdb and found i can up to channel 36 . Am i doing something wrong
Mark T.asked
I have recorded several movies and every one of them stops recording after 1 hour and 1 minute?
3 answers
I believe this is an option in Settings that allows you to set both space and time for PVR recording. Go to Menu then USB then PVR configure. Hope this helps.
Hi Mark, I have found same issue with no success in changing the set time. It also happens playing movies from the usb port. Seems to have a set timer. I got rid of mine and bought a different brand and it is the same.
Hi Ian
you were correct, there is a setting in PVR recording that I changed to 3 hours so I now can record entire movies, thx for your suggestion, cheers
Danny Vasked
Teac HDB860 set-top box. 6 Months old.
About every 30 seconds both video and audio freeze up and resume 5 seconds later, skipping the missing 5 seconds all-together. Problem started 2 days ago.
An easy fix apart from junking this box and buying another brand?
1 answer
Almost certainly your set-top box is fine. Pixellating and freezing usually caused by weak signal from the aerial. Check your cables are all plugged in properly. Try bypassing the box altogether and plugging the aerial direct to the TV, If it's still bad that will prove it's your aerial. Hope this helps.
ieatwords.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ieatwords.com.au may earn commissions for products/services purchased via affiliate links.