Westinghouse WSF6606X (Stainless Steel) Questions & Answers (page 4 of 6)

Have you tried unplugging it at the wall leajingvit our for a minute and turning on again? I’d call where you purchased it from if it’s under warranty

Yes, tried unplug and plug back in & still not working

We have the same error at the moment, did you get an answer for your question. Any suggestions on how to fix it please

Is your outlet hose blocked? The hose attachment on a pvc S-bend may need to be drilled open.

Just guessing but are your drains blocked do dishwasher not draining properly

Hi Sherree,
Not sure what this error is as I haven’t had any problems with mine.
I’d would search the trusty Google for answers & if nothing helps on there then I would contact Westinghouse.
Sorry I couldn’t help

Handy Husband fixed it, our error F9 fixed by, Googling (Google) - Westinghouse dishwasher model wsf6608x flow control valve, under images open the pic diagram 942001222 00 - Wholesale Appliance Supplies, spare part 123 cost $9.90 picked up part from Northside Appliance Spares & Repairs Pty Ltd, 189 Robinson Rd, East Geebung, QLD, [email protected]
(Facing the dishwasher take off the left side panel and replace 123 part)

Hello my dishwasher is showing error F9 too. I was wondering if you found out why and how to fixes the problem

It’s the drain hose filter. A new drain hose for approximately $30 and all fixed.

Handy Husband fixed it, our error F9 fixed by, Googling (Google) - Westinghouse dishwasher model wsf6608x flow control valve, under images open the pic diagram 942001222 00 - Wholesale Appliance Supplies, spare part 123 cost $9.90 picked up part from Northside Appliance Spares & Repairs Pty Ltd, 189 Robinson Rd, East Geebung, QLD, [email protected]
(Facing the dishwasher take off the left side panel and replace 123 part)

Try hold down the start/pause button for 3 seconds to cancel the load then restart it. I think that’s what I did last time. Maybe check the manual if that doesn’t work I remember just button mashing till it turned off or start a weird shorter load

Hi Mini you are right on the ticket. The H01 displays when you opt for time delay. You reset it by START/PAUSE
and use either the+ or - sign to select a new delay time. Naturally you have to press the start/pause to activate your choice. I hope this answers your question.
Kaz x

Hiya, yes that's right. I find this function particularly useful over night. So I program the machine to start a couple of hours before I get up in the morning so that it's just finished and I can open it and let the steam out, rather than it staying in all night

Thanks for the replies. Great help

Hi there. I've not seen this but apparently it is the Child Lock, you may have set it without realising it? The instruction book says: "In order to activate child lock, press “+” and “–” buttons simultaneously for 3 seconds. At this time, “CL” appears for 2 seconds on remaining time indicator. To inactive child lock, press “+” and “–” buttons again simultaneously for 3 seconds. “CL” will blink once." Hope you can deactivate it OK!

Thank you so much - it worked!

How to take of delay

$150 include postage easy to fit

Mine literally started doing this today too!....well Yesterday now.

I've only had it just over a week and nothing like that had occurred. I suggest you contact Electrolux service centre for help.

I think this is just a delay start code - happened to us too. Just press the +- buttons until you get it back to 00 and it should start.

Hi, Did you find an answer? same thing happening to ours???? thanks

Its a draining fault, most likely the pipe is blocked or you need to clean the machine

Just happen to fix one with this code. Water in the bottom and wouldn't drain completely then error code came up. Cleared the hose where it was connected at the drain. Only 5 minutes work with a screwdriver. Peterp

Well you appear to have done everything according to the manual. Try calling their service centre and then write a review of how they helped you? One of the reasons I went for the Westinghouse was the number of positive reviews and the more I use it the more impressed I am.

I just rang the company, they also said that I did the right thing. They suggest to wait until the count down finishes as it has gone from H24 to h06 and hopefully it will fix the problem, otherwise I have to get a technician out. Fingers are crossed

H01-H24 is the delay time to turn on. simply cancel it

Well only that the thing wont drain. Other than checking there are no kinks in the hose etc I would call their service centre. Sorry I can't help any more than that. Cheers

Hi,
So there is a water supply problem. If there is no kink there is a small filter in the supply line you might check? Other than that you might have to call their service centre. Cheers

Thanks I found the problem after posting. I had a little visitor who eat a wire going to a solinoid under the round circle of foam which I guess is a drip pad. Repaired the wires and all good and running well.