Read also:
zodiac tri chlorinator flow light flashing mothers choice celestial car seat review miele 09983500 complete powerline family all-rounder vacuum cleaner aldi air fryer oven review auspost.com.au/everydaycard/register masport 470 2 n1 lawnmowerWestinghouse WSF6608 Series Questions & Answers
WSF6608X (Stainless), WSF6608W (White), WSF6608KXA (Dark Stainless Steel), WSF6608XA (Stainless Steel)45 questions from our users
Julie Lyonsasked
Why does this dishwasher leak and why does the top spray arm hit the top of regular sized dinner plates?
No answers
Margaret Aasked
Is this model still under warranty?
No answers
Joanne T.asked
my wash arm keeps falling off the bottom of the middle drawer. I click it back on Seems to stick at the water connection at the back. How do I stop this please
No answers
Mahmood A.asked
The rinse aid light is off even when I fill it with rinse aid how can I turn it on?
No answers
Ianasked
Hi,
I have had our new Westinghouse WSF6608 dishwasher for a month or so now. The initial few loads went well - however since then it has failed to open the tablet/powder compartment so dishes don't get washed. Frustrating to say the least. Should I get a service call under warranty, or is there a simple solution?
Ian.
No answers
Danny Twilasked
Our machine is showing an F5 error model WSF6608F
No answers
Kevinasked
We have a 6608W. Is F8 - Heater Error - a terminal problem or is it economic to repair? The dishwasher is just over four years old.
No answers
Trinozasked
Can you attach this machine to a hot inlet? Didn’t find any mention In the manual.
2 answers
Hi Trinoz, about 4 weeks ago we changed the connection from cold to hot to save on electricity and use already heated hot water from the gas storage hot water unit. It's been working fine with no problems. We run it daily.
Hope this helps.
Thanks for that info. I’ve got solar panels & an existing hot water connection for the dishwasher. Didn’t want to have to get a plumber out but had a look under the sink & it’s a rather simple job to change the connectors over if needed. Seems many dishwashers these days say cold connection but have an inlet temp range up to 60C just to confuse us;) Spoke with someone at Westinghouse. She said there was a tempering valve for if your water is over 60 but insisted they were a cold only machine. I pointed out the inconsistency of this info. She agreed & said she’d look into it as many people are probably wondering the same thing. Happy washing.
TerezaBasked
can the top cover be removed to make sure the dishwasher will fit under bench. I have just on 850mm height to play with but want to make sure it fits. the old ASKO they took the top cover off top make it fit
Sandra Wasked
Is there anyone out there who has anything positive to say on the WSF6608X.
I have just ordered one of these.
Cheers Sandra
2 answers
Just make sure you measure your dinner plates I loved the thought of having the cutlery basket at the top saves more bending haha, but unfortunately can't as the dinner plates on the second shelf make it impossible, wish I knew this before I purchased.
Thanks for your comments, I have now received my dishwasher and when I put my dinner plates (which are 28cm in diameter) n the bottom basket, shock horror came over me, the spray arm did not clear the top of my plates, so I had read when doing some research on dishwashers before buying, that the top basket could be adjusted up in a higher position, which I did by reading in the manual of how to do it, it gave me enough clearance plus 4cm more to spare, so I would be able to fit easily 30cm size plates in the bottom basket. Give it a go! However this does make the top basket more shallow, hence long stemmed glasses etc, have to be placed on an angle to be washed.
Must admit my last westinghouse dishwasher that lasted me 17 years was a much better layout, so sometimes the new models are not always an improvement. However we have now got this new machine with the cutlery tray uptop, and. have the drying option, so I suppose I had better learn to love it, and just enjoy it for what it is,
Kateasked
Hi, the powder compartment in our WSF6608 doesn't open during the cycle - the powder remains in the compartment. Does anyone have advice on how the compartment spring is triggered during the cycle? Our dishwasher is less than 2 yrs old and the compartment appears to open and close properly. We are also disappointed with the degree of drying after having previously owned a Bosch dishwasher that dried dishes amazingly well. I've read the other questions here and we've tried different cycles - still experiencing wet dirty dishes after a two-hour-plus cycle! I'd welcome any suggestions - thanks.
3 answers
Hi, I cant speak for powder as I use a tablet and I never have any issues with that, I suggest you may need it looked at by a technician, not sure if its still under warranty. with drying my favourite setting is the heavy option and the timeframe isn't long at all for this option.
maybe worth trying a tablet, make sure you have full rinse aid and use heavy, then let me know if that helps, otherwise you may need to get it looked at.
I have a new WSF6608 dishwasher and after a few successful cycles it is also now failing to open the powder/tablet flap in use. Sounds like a service call might be in order also. I have tried with the tablet button selected and not with no difference. I think this is only for the 2 in 1 type of tablet, so you wouldn't think it would make a difference.
I have a new WSF6608 dishwasher and after a few successful cycles it is also now failing to open the powder/tablet flap in use. Sounds like a service call might be in order also. I have tried with the tablet button selected and not with no difference. I think this is only for the 2 in 1 type of tablet, so you wouldn't think it would make a difference.
Bevo7584asked
I have an issue where the dishwasher stops, lights go off then it either flickers or comes back on again.... This can happen multiple times a wash. Oh and no error codes, if I lucky it just continues on & finishes the wash like nothing has happened.
Any help appreciated, I'm hoping it's something simple I can fix or have overlooked?
3 answers
I am actually having the exact same issue and came here looking to see if anyone else was having a similar problem. I would love to see what the answer is to this.
My machine is less than 4 months old and has been doing this on and off for the last couple months and is starting to get really annoying!!
Try the tablet setting... I haven't noticed a problem when I remember to turn it on.
Angie Rasked
Having floorboards laid over tiles, can i remove the top of the dishwasher to make room for the added floor height wsf606606x
No answers
Philasked
Should i conect the water inlet to the hot water tap or the cold water tap?
1 answer
We did cold water tap, you will find most use the cold, it should say somewhere in the manual
brownasked
what setting for fine china and crystal?
No answers
Jennyasked
Can get dishwasher to go onto time saver. Any help?
No answers
Vaughan Kasked
The programme button is stuck in so I cannot select a suitable programme. What do I do?
1 answer
ELECTROLUX ..Westinghouse
Hi Vaughan,
Julie from Electrolux here.
We are sorry to hear you are experiencing problems with your dishwaasher.
We would love the opportunity to discuss the concerns you have raised with your dishwasher
If you wish to discuss this further please feel free to contact me at [email protected] attention Julie
Thanks
Julie
Kayasked
My dishwasher won't drain, f2 keeps flashing. Have checked for blockages, have tried dishwasher cleaner and still won't drain properly. Any ideas?
stuartasked
I have recently purchased the WSF6608 dishwasher, and have just installed it with the kitchen upgrade. I have found an issue in that I need to raise the upper basket in order for the dinner plates to fit in the lower basket, but when I raise the upper basket to the top position, and then try to push it back in, it is hitting the runners for the cutlery draw, and am unable to push it back in. Has anyone else had this issue, and how do I fix it?
Pete AMasked
Where is this dishwasher made / manufactured?
ieatwords.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ieatwords.com.au may earn commissions for products/services purchased via affiliate links.